• 한국통신학회논문지
• /
• 제35권3B호
• /
• pp.526-535
• /
• 2010

본 논문에서는 유무선 통합 환경에서 안정된 방통융합 멀티미디어 서비스를 제공하기 위한 네트워크 기반의 이동성 관리 기술을 제안하고, 시스템 구현을 통한 성능 분석 결과를 제시한다. 제안된 방식은 네트워크 기반의 이종 액세스 네트워크간 이동성 제어 기술인 AIMS(Access Independent Mobility Service) 기술에서, 액세스 네트워크에 접속된 MN(Mobile Node)들의 안정된 위치 관리 및 핸드오버 제어를 위하여 MN의 네트워크 접속 및 접속 해제 감지를 통한 안정된 바인딩 정보 관리 기능을 제안한다. 또한, AIMS 시스템에서 신뢰성 있는 안정된 이동성 제어 메시지 전달을 위해서 이동성 제어 메시지의 재전송 기능 그리고 MN들에게 안정된 액세스 네트워크 접속 환경을 제공하기 위한 이동성 제어 노드간의 Heartbeat 메시지 전송 기능을 제안한다. 제안된 방식은 AIMS 시험 네트워크 구현 연구를 통하여 기능 검증 및 성능 분석을 수행하였다.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.883-890
• /
• 2003

Two GOS (Generalized Observer Scheme) type Fault Detection Isolation Schemes (FDIS), employing the bank of unknown input functional observers (UIFO) as a residual generator, are proposed to make the practical use of the multiple observer based FDIS. The one is IFD (Instrument Fault Detection) scheme and the other is PFD (Process Fault Detection) scheme. A design method of UIFO is suggested for robust residual generation and reducing the size of the observer bank. Several design objectives that can be achieved by the FDI schemes and the design methods to meet the objectives are described. An IFD system is constructed for the Boeing 929 Jetfoil boat system to show the effectiveness of the propositions. Major contributions of this paper are two folds. Firstly, the proposed UIFO approaches considerably reduce the size of residual generator in the GOS type FDI systems. Secondly, the FDI schemes, in addition to the basic functions of the conventional observer-based FDI schemes, can reconstruct the failed signal or give the estimates of fault magnitude that can be used for compensating fault effects. The schemes are directly applicable to the design of a fault tolerant control systems.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.267-272
• /
• 1999

In many fields of automation, increasingly high demands are being placed on the availability and fault tolerance of programmable logic controller(PLC). Particularly in fields where a plant shutdown would be extremely expensive. In such cases, only redundant systems can offer the standard of availability required. The redundant configurations contain more then would normally be necessary for the relevant function. Fault tolerant systems will normally continue to operate even if one or more faults cause parts of the control system to fail.

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.949-959
• /
• 2009

This paper presents a systematic investigation of the fault-mode behaviors of matrix converter systems. Knowledge about converter behaviors after fault occurrence is important from the standpoint of reliable system design, protection and fault-tolerant control. Converter behaviors have been, in detail, examined with both qualitative and quantitative approaches for key fault types, such as switch open-circuited faults and switch short-circuited faults. Investigating the fault-mode behaviors of matrix converters reveals that converter operation with switch short-circuited faults leads to overvoltage stresses as well as overcurrent stresses on other healthy switching components. On the other hand, switch open-circuited faults only result in overvoltage to other switching components. This study can be used to predict fault-mode converter behaviors and determine additional stresses on remaining power circuit components under fault-mode operations.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.52-60
• /
• 2018

The winding of the motor stator coil is broken due to external stress and various factors. If the proper current is not injected when interturn fault(ITF) occurs, the fault can easily be expanded and the motor can be finally destroyed, resulting in many problems with time costs and safety. In this paper, the power loss limit concept, which is the inherent durability of each motor, is applied to secure safety by controlling the total power loss of the motor within the limits. So, we propose an algorithm that can control maximum torque per minimum power loss based on constant torque curve and power loss limit. To verify the proposed method, the simulation and experimental results with an Interior permanent magnet synchronous motor(IPMSM) having an ITF are shown.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.546-552
• /
• 2010

As the demands for the safety and convenience applications of the vehicles increase, the data load for the In-vehicle Network has increased significantly. As a result, a deterministic and fault-tolerant communication system is required to implement the safety critical applications such as X-by-wire systems. FlexRay communication system is a new standard of network communication system which provides the high speed serial communication, time triggered bus and fault tolerant communication between electronic devices. In addition to time-triggered communication, as providing of the event-triggered communication such as CAN, FlexRay protocol is able to manage the restricted communication resource more effectively. This paper presents the development of FlexRay driver which will be applied to the future ECU's communication system. To develop the FlexRay driver, the FlexRay requirement specification and FlexRay specification is analyzed. The developed FlexRay driver is implemented by using MPC5567 microprocessor of the Freescale semiconductor. To verify the developed FlexRay driver, the waveform of the FlexRay driver was measured and compared with the CAN communication system. As a result, the bus load is reduced about 13% compared with the CAN communication system.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.120-126
• /
• 2013

This paper proposes a novel scheme of fault detection and self-recovery for space-borne dual ring counters subject to transient faults. The considered ring counter is equipped with hardware redundancy, but it has a limited output domain where direct access to the current state is unavailable. We employ the theory of corrective control to detect any transient fault occurring to the counter bits and to realize immediate self-recovery of the ring counter back to the normal state. The structure of the fault-tolerant controller is designed to be minimal regardless of the counter size. To validate the applicability, we implement the proposed system on a commercial FGPA board.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1259-1263
• /
• 1999

In this paper, a method to guarantee system continuity is developed, which can be applied to discontinuity problem in the time domain of restructurable control system. This method can be summarized as input alternation using weight change considering convergence speed of system mode. Input is changed from 'system continuity guarantee input,' which is defined as a input that minimizes the change of state variables, to 'alternative controller input,' which is selected by Neil's PI/EAM[3]. AIDC aircraft model is used for simulation. By showing the waveform of system input and state variable, we can sure that this method is effective for depression of system shock like jerk.

• 한국멀티미디어학회논문지
• /
• 제14권7호
• /
• pp.940-948
• /
• 2011

본 논문에서는 단일 처리기를 가지는 임베디드 시스템에서 실시간성과 결함 허용을 고려한 태스크 스케줄러를 설계하고 구현한다. RMS(Rate Monotonic Scheduling) 기법을 이용하여 주기적 태스크를 실행하고 태스크의 실행 마감 시간을 보장하며 잉여 시간을 관리함으로써 비주기적 태스크의 실행 및 완료 방법을 제시한다. 또한 백업 시간을 관리함으로써 일시적인 태스크의 단일 결함을 허용하기 위한 결함 허용 기법을 제공한다. 주기적 태스크와 비주기적 태스크의 응답시간을 조절할 수 있는 주기적 태스크의 중요도를 제시한다. 마지막으로 시뮬레이션을 통해 제시한 방법의 결과를 분석하고 평가한다.

• 한국항공우주학회지
• /
• 제30권7호
• /
• pp.61-67
• /
• 2002

본 논문에서는 항공기의 제어면 혹은 구동장치가 고장이 났을 때 이를 신속하게 진단규명하고 안정한 상태로 되돌리기 위한 고장보완제어시스템을 설계한다. 제어시스템 설계에는 수렴 속도가 빠른 확장 역전파 알고리즘을 적용한 신경회로망을 이용한다. 제어대상으로는 비선형 운동방정식으로 표현된 F-4 항공기이며 수평미익이나 에일러런의 고장이 발생할 경우에 대하여 제어시스템을 설계하고 시뮬레이션을 통하여 성능을 검증한다.