• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.4
• /
• pp.399-422
• /
• 2009

Although current wireless mesh network (WMN) applications experience a perceptually uninterrupted hand-off, their throughput after the hand-off event may be significantly degraded due to the low available bandwidth of the mobile client's new master. In this paper, we propose a novel mobility management scheme for 802.11-based WMNs that enables both seamless hand-off for transparent communications, and bandwidth awareness for stable application performance after the hand-off process. To facilitate this, we (i) present a new buffer moment in support of the fast Layer-2 hand-off mechanism to cut the packet loss incurred in the hand-off process to zero and (ii) design a dynamic admission control to grant joining accepts to mesh clients. We evaluate the benefits and drawbacks of the proposal for both UDP and TCP traffic, as well as the fairness of the proposal. Our results show that the new scheme can not only minimize hand-off latency, but also maintain the current application rates of roaming users by choosing an appropriate new master for joining.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.1153-1156
• /
• 2003

무선네트워킹의 급격한 확대와 휴대가 간편한 이동단말의 보급이 증가함에 따라 QoS와 이동성이 보장된 IP Telephony 서비스가 필요하게 되었다. 무선인터넷을 이용하는 Voice over IP 서비스는 IP 기반의 인터넷과 셀룰러 네트워크를 합쳐 놀은 것과 유사하며 모바일 노드의 이동성 확보가 핵심 기술이다. 특히 전화서비스의 이용자는 Web이나 FTP같은 데이터 기반의 서비스에 비하여 지연이나 끊어짐에 매우 민감하므로 가급적 지연시간이 적은 핸드오프 기법이 필요하다. 본 연구에서는 무선네트워킹을 이용하는 VoIP 서비스 프로토콜 중 하나인 SIP(Session Initiation Protocol)를 기반으로 이동성 관리를 위한 신호의 흐름과 발생 가능한 지연의 구성요소를 분석하였다. 또한 핸드오프 지연을 줄이기 위한 유용한 기법이지만 신호 트래픽을 과다하게 발생시키는 Shadow Registration에 예측기법을 적용하여 핸드오프 지연을 감소시키면서도 신호 트래픽을 최소화하는 PSR(Predictive Shadow registration) 기법을 제안하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.138-147
• /
• 2003

There are some problems of current internet protocols to support the mobility of terminal in wireless environments. The mobile IP has come out to solve these problems, but there exists some problems like triangle routing, the need of each host's home address and the management of tunneling. Also. real-time multimedia traffics require fast hand-off, low latency and the utilization ratio of high bandwidth. SIP can support the mobility of wireless terminal and is widely accepted as the protocol which can support multimedia service and call setup in next generation network. In this paper, the framework of SIP system will be designed and implemented to support the mobility of wireless terminal by using JAIN API which follow the standards of next generation network and this system matches the standards of next generation network.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.11-17
• /
• 2008

This paper proposes the USN node location recognition method with low power, which is the modified centroid method. The conventional Zigbee node location recognition is used to the three RSSI values from three beacons, respectively. When a person move with node, the moving speed of USN node doesn't fast. Therefore, one among three positions used to the value that it is a previous value. This method doesn't large the error in terms of the exact position. Using hand-off method, we get about 30% power advantage than the conventional centroid method. And Our monitoring system add the function that it is possible to search for the node region by color.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.491-501
• /
• 2015

Spectrum sensing is an elementary function in cognitive radio designed to monitor the existence of a primary user (PU). To achieve a high rate of detection, most techniques rely on knowledge of prior spectrum patterns, with a trade-off between high computational complexity and long sensing time. On the other hand, blind techniques ignore pattern matching processes to reduce processing time, but their accuracy degrades greatly at low signal-to-noise ratios. To achieve both a high rate of detection and short sensing time, we propose fast spectrum sensing with coordinate system (FSC) - a novel technique that decomposes a spectrum with high complexity into a new coordinate system of salient features and that uses these features in its PU detection process. Not only is the space of a buffer that is used to store information about a PU reduced, but also the sensing process is fast. The performance of FSC is evaluated according to its accuracy and sensing time against six other well-known conventional techniques through a wireless microphone signal based on the IEEE 802.22 standard. FSC gives the best performance overall.

• Journal of Food Hygiene and Safety
• /
• v.27 no.3
• /
• pp.215-223
• /
• 2012

This study was performed to investigate hygienic behavior of food workers on the awareness of hand-washing, and the microbial load of their hands. This study focused on the comparison of fast food restaurant workers and full-service restaurant workers. A questionnaire survey and microbiological analysis were carried out for thirty fast food restaurant workers and forty full-service restaurant workers. Samples for microbiological analysis were collected through the glove-juice method from the hands of the food workers, and were analyzed for the presence of aerobic plate counts, total coliforms, fecal coliforms, Escherichia coli, Staphylococcus aureus, and Salmonella spp. Microbiological analysis was done according to the Food Code of Korea. In the survey, significant differences (p < 0.05) were found between the fast food restaurant workers and full-service restaurant workers in the use of hand washing tools and method of turning off water. More full-service restaurant workers responded to wash their hands after touching face, hair, or clothes; after handling raw food materials, and more fast food restaurant workers periodically (p < 0.05). Aerobic plate counts were higher in fast food restaurant workers while total coliforms were higher in full-service restaurant workers (p < 0.05). No remarkable difference was found between the two groups in the load of fecal coliforms, E. coli, S. aureus, and Salmonella spp. Poor hand hygiene practices were indicated by the positive results for E. coli, S. aureus, and Salmonella spp. on the hands of some food workers in both groups. The findings of this study emphasize the need for strict adherence to hand hygiene compliance among the food workers.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.10
• /
• pp.479-485
• /
• 2001

In this paper, we introduce a charge pump phase-locked loop (PLL) architecture which employs a precharge phase frequency detector (PFD) and a sequential PFD to achieve a high frequency operation and a fast acquisition. Operation frequency is increased by using the precharge PFD when the phase difference is within $-{\pi}{\sim}{\pi}$ and acquisition time is shortened by using the sequential PFD and the increased charge pump current when the phase difference is larger than ${\pm}{\pi}$. So error detection range of the proposed PLL structure is not limited to $-{\pi}{\sim}{\pi}$ and a high frequency operation and a higher speed lock-up time can be achieved. The proposed PLL was designed using 1.5 ${\mu}m$ CMOS technology with 5V supply voltage to verify the lock in process. The proposed PLL shows successful acquisition for 200 MHz input frequency. On the other hand, the conventional PLL with the sequential PFD cannot operate at up to 160MHz. Moreover, the lock-up time is drastically reduced from 7.0 ${\mu}s\;to\;2.0\;{\mu}s$ only if the loop bandwidth to input frequency ratio is regulated by the divide-by-4 counter during the acquisition process. By virtue of this dual PFDs, the proposed PLL structure can improve the trade-off between acquisition behavior and locked behavior.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.686-694
• /
• 2014

A power semiconductor device, usually used as a switch or rectifier, is very significant in the modern power industry. The power semiconductor, in terms of its physical properties, requires a high breakdown voltage to turn off, a low on-state resistance to reduce static loss, and a fast switching speed to reduce dynamic loss. Among those parameters, the breakdown voltage and on-state resistance rely on the doping concentration of the drift region in the power semiconductor, this effect can be more important for a higher voltage device. Although the low doping concentration in the drift region increases the breakdown voltage, the on-state resistance that is increased along with it makes the static loss characteristic deteriorate. On the other hand, although the high doping concentration in the drift region reduces on-state resistance, the breakdown voltage is decreased, which limits the scope of its applications. This addresses the fact that breakdown voltage and on-state resistance are in a trade-off relationship with a parameter of the doping concentration in the drift region. Such a trade-off relationship is a hindrance to the development of power semiconductor devices that have idealistic characteristics. In this study, a novel structure is proposed for the Insulated Gate Bipolar Transistor (IGBT) device that uses conductivity modulation, which makes it possible to increase the breakdown voltage without changing the on-state resistance through use of a P-floating layer. More specifically in the proposed IGBT structure, a P-floating layer was inserted into the drift region, which results in an alleviation of the trade-off relationship between the on-state resistance and the breakdown voltage. The increase of breakdown voltage in the proposed IGBT structure has been analyzed both theoretically and through simulations, and it is verified through measurement of actual samples.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.807-810
• /
• 2005

Constructed network test environment of wireless base for confidentiality guarantee of data and safe transmission that is transmited at Mobile node of Wireless Network environment in this paper. And, progressed research about IKEv2's Multiple-Key Exchange mechanism for efficient security transmission that use IPSec that is built-in to basis to IPv6 of Mobile environment. Have several key to single terminal to solve that is seam at hand off packet transmission process of Mobile Node in Wireless Network and Re-setting for Key and Re-exchange problem that happen frequently and studied technology that move. Key exchange protocol that is used for an experiment loads basically in MIPv6 and used IKEv2 protocol that is used for management and distribution of reliable encryption key between both end. Using network simulator of SSFNet(Scalable Simulation Framework Network Models) in this paper Key exchange delay value of IKEv2's security transmission analyzing comparison Performance measure and studied about problem and improvement way accordingly.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.2
• /
• pp.73-77
• /
• 2012

Operation of liquid crystal displays (LCDs) can be improved by monolithic integration of the pixel transistors with light emitting diodes (LEDs) on a single substrate. Conventional LCDs make use of filters to control the backlighting which reduces the overall efficiency. These LCDs also utilize LEDs in series which impose failure and they require high voltage for operation with a power factor correction. The screen of small hand-held devices can operate from moderate brightness. Therefore, III-V nanowires that are grown along with transistors over Silicon substrates can be utilized. Control of nanowire LEDs with nanowire transistors will significantly lower the cost, increase the efficiency, improve the manufacturing yield and simplify the structure of the small displays that are used in portable devices. The steps to grow nanowires on Silicon substrates are described. The vertical n-type and p-type nanowire transistors with surrounding gate structures are characterized. While biased at 0.5 V, nanowire transistors with minimum radius or channel width have an OFF current which is less than 1pA, an ON current more than 1 ${\mu}A$, a total delay less than 10 ps and a transconductance gain of more than 10 ${\mu}A/V$. The low power and fast switching characteristics of the nanowire transistor make them an ideal choice for the realization of future displays of portable devices with long battery lifetime.