• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.525-527
• /
• 1996

Hysteresis current control is one of the simplest techniques used to control currents for high speed drive systems, because of its simplicity of implementation, fast current control response, and inherent peak current limiting capability. However the conventional fixed-band hysteresis control has a variable switching frequency throughout the fundamental period, and consequently the load current harmonics spreaded on the wide frequency range. In this paper, a simple, novel alterative approach is proposed for a variable-hysteresis band current controller which uses feedback techniques to achieve constant switching frequency with good dynamic response. The method is easily implemented in hardware, the resultant controller is easily tuned to a particular load, and has good immunity to variation in PV parameter and dc supply voltage.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.188-193
• /
• 2011

A highly efficient AC-DC converter for small wind power generation systems using a brushless DC generator (BLDCG) is presented in this paper. The market standard AC-DC converter for a BLDCG consists of a three-phase diode rectifier and a boost DC-DC converter, which has an IGBT and a fast recovery diode (FRD). This kind of two-stage solution basically suffers from a large amount of conduction loss and the efficiency greatly decreases under a light load, or at a low current, because of the switching devices with a P-N junction. In order to overcome this low efficiency, especially at a low current, a three-phase bridgcless converter consisting of three upper side FRDs and three lower side Super Junction FETs is presented. In the overall operating speed region, including the cut-in speed, the efficiency of the proposed converter is improved by up to 99%. Such a remarkable result is validated and compared with conventional solutions by calculating the power loss based on I-V curves and the switching loss data of the adopted commercial switches and the current waveforms obtained through PSIM simulations.

• 제어로봇시스템학회논문지
• /
• 제2권1호
• /
• pp.9-13
• /
• 1996

슬라이딩 모드 제어기의 실현시 발생하는 고주파 chattering 현상을 제거하기 위하여 본 논문에서는 스위칭 표면 행렬의 Range-space 동특성을 이용한 연속 시간 스위칭 다이나믹을 제안한다. 전체 폐루프 시스템은 정칙 변환에 의해 빠른 부시스템과 느린 부시스템으로 분해되어, 결국 전체 폐루프 시스템의 고유치는 각각 스위칭 표면 행렬의 Range-space와 Null-space의 동특성을 지배하는 부시스템들의 고유치들로 구성됨을 보인다. 그리고, 정합된 불확실성이 존재하는 경우 제안된 스위칭 다이나믹을 가진 제어 시스템의 응답은 일정 시간이 경과된 후 스위칭 평면의 임의의 영역으로 균일하게 유계된다는 것을 증명한다. 또한, 제어 입력의 크기에 대한 제약성을 만족하면서도 전체 제어 시스템의 정상 상태 오차를 감소시키기 위하여 두개의 스위칭 다이나믹을 도입한 수정된 슬라이딩 모드제어기를 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.163-166
• /
• 2003

In recent years, there has been increased to access multimedia service through the Internet due to rise of the access speed. We suppose the co-existence of the various access networks in adjacent area in the future, such as wireless LAN, Bluetooth, and 3G Cellular So, the size of the cell will be smaller and the number of access point will be increased. In other words, the potable devices need the efficient mobility scheme due to move between cells frequently Currently, the several of the scheme, which is Cellular IP, HAWAII, Mobile IPv4 regional registration, and hierarchical Mobile IPv6, is suggested to support micro-mobility but Mobile IPv4 is standard scheme to support the mobility of the mobile node. MPLS, which forwards the packet through switching instead of routing using IP address, has begun to deploy in the internet backbone to increase the performance of mobility protocol. The integration of both MPLS and Mobile IP improves the scalability of the Mobile IP data forwarding process by leveraging on the features MPLS which are fast switching and high scalability. Moreover it abbreviates IP-in-IP tunneling between HA and FA. In this paper, we suggest efficient mobility scheme through integration of both MPLS and hierarchical Mobile IPv6.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.781-790
• /
• 2009

This paper presents an implementation of a direct active and reactive power control for a doubly fed induction generator (DFIG), which is applied to a wind generation system as an alternative to the classical field-oriented control (FOC). The FOC has a complex control structure that consists of a current controller, a power controller and frame transformations. The performance of the FOC depends highly on parameter variations of the rotor and stator resistances and the inductances. The proposed direct power control (DPC) method produces a fast and robust power response without the need of complex structure and algorithms. One drawback, however, is its high power ripple during a steady state. In this paper, active and reactive power controllers and space-vector modulation (SVM) are combined to replace hysteresis controllers used in the original DPC drive, resulting in a fixed switching frequency of the power converter. Simulation results with the FOC and DPC for a 3kW DFIG are given and discussed, and the experimental results of a test involving identical machines are presented to illustrate the feasibility of the proposed control strategy.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1448-1457
• /
• 2018

Many researchers devote themselves to develop model-predictive direct power control (MPDPC) so as to accelerate the response speed of the grid-connected systems, but they are troubled its large computing amount. On the basis of MPDPC, dual MPDPC (DMPDPC) is presented in this paper. The proposed algorithm divides the conventional MPDPC into two steps. In the first step, the optimal sector is obtained, which contains the optimal switching state in three-level converters. In the second step, the optimal switching state in the selected sector is searched to trace reference active and reactive power and balance neutral point voltage. Simulation and experiment results show that the proposed algorithm not only decreases the computational amount remarkably but also improves the steady-state performance. The dynamic response of the DMPDPC is as fast as that of the MPDPC.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1597-1604
• /
• 2016

The speed at which the SRM (Switched Reluctance Motor) makes a transition from chopping control to single pulse operation. (i.e., low speed to high speed operation). It is unsatisfied with performance at all operational regimes. In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on energy efficient C-dump converter topology and the proposed resonant C-dump converter topology. Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.

• 한국정보통신학회논문지
• /
• 제9권7호
• /
• pp.1518-1523
• /
• 2005

인터넷 사용자의 증가에 따른 데이터 수요와 트래픽 증가에 따라 오늘날의 네트워크는 빠른 전송 속도와 넓은 대역폭을 요구한다. OBS 기반 광 네트워크는 이러한 요구사항을 만족시킬 수 있는 방안으로 활발히 연구가 진행되고 있으나, 도청, 위장, DoS 등의 보안 위협에 취약하다. 본 논문에서는 OBS 기반 광 네트워크에서 존재하는 보안 취약점 및 보안 공격을 분석하며, 이를 기반으로 안전한 서비스 제공을 위해 인증 및 키 분배 가능한 정보보호 프로토콜을 제시한다. 본 논문에서는 OBS 기반 광 네트워크에서 보안 기능을 강화하기 위해 제어 메시지를 이용하여 명시적 인증을 제공하며, 공통키값을 이용하여 제어 메시지를 보호한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.28-32
• /
• 2004

In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on conventional C-dump converter topology and the proposed resonant C-dump converter topology Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.290-295
• /
• 2005

Hydraulic actuators are important in modern industry due to high power, fast response, and high stiffness. In recent years, hybrid actuation system, which combines electric and hydraulic technology in a compact unit, can be adapted to a wide variety of force, speed and torque requirements. Moreover, the hybrid actuation system has dealt with the energy consumption and noise problem existed in the conventional hydraulic system. Therefore, hybrid actuator has a wide range of application fields such as plastic injection-molding and metal forming technology, where force or pressure control is the most important technology. In this paper, the solution for force control of hybrid system is presented. However, some limitations still exist such as deterioration of the performance of transient response due to the variable environment stiffness. Therefore, intelligent switching control using Learning Vector Quantization Neural Network (LVQNN) is newly proposed in this paper in order to overcome these limitations. Experiments are carried out to evaluate the effectiveness of the proposed algorithm with large variation of stiffness of external environment. In addition, it is understood that the new system has energy saving effect even though it has almost the same response as that of valve controlled system.