• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.888-894
• /
• 2011

Blackboard architecture was designed as a means for dealing with ill-defined and complex problems. In order to improve the efficiency of the systems using blackboard architecture, this paper proposes a mechanism for fast detection of knowledge source activations which can contribute potentially to the problem solving of blackboard systems, whenever the state of blackboard is changed. The proposed mechanism uses a Rete network generated from the activation conditions subscribed by all knowledge sources to process the pattern matching between blackboard data and the activation conditions efficiently.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.58-73
• /
• 2014

As is well known, cooperative sensing can significantly improve the sensing accuracy as compared to local sensing in cognitive radio networks (CRNs). However, a large number of cooperative secondary users (SUs) reporting their local detection results to the fusion center (FC) would cause much overhead, such as sensing delay and energy consumption. In this paper, we propose a fast cooperative sensing scheme, called double threshold fusion (DTF), to reduce the sensing overhead while satisfying a given sensing accuracy requirement. In DTF, FC respectively compares the number of successfully received local decisions and that of failed receptions with two different thresholds to make a final decision in each reporting sub-slot during a sensing process, where cooperative SUs sequentially report their local decisions in a selective fashion to reduce the reporting overhead. By jointly considering sequential detection and selective reporting techniques in DTF, the overhead of cooperative sensing can be significantly reduced. Besides, we study the performance optimization problems with different objectives for DTF and develop three optimum fusion rules accordingly. Simulation results reveal that DTF shows evident performance gains over an existing scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2434-2453
• /
• 2019

To improve the separation performance of time-frequency overlapped radar and communication signals from a single channel, this paper proposes an effective separation method based on an improved empirical wavelet transform (EWT) that introduces a fast boundary detection mechanism. The fast boundary detection mechanism can be regarded as a process of searching, difference optimization, and continuity detection of the important local minima in the Fourier spectrum that enables determination of the sub-band boundary and thus allows multiple signal components to be distinguished. An orthogonal empirical wavelet filter bank that was designed for signal adaptive reconstruction is then used to separate the input time-frequency overlapped signals. The experimental results show that if two source components are completely overlapped within the time domain and the spectrum overlap ratio is less than 60%, the average separation performance is improved by approximately 32.3% when compared with the classic EWT; the proposed method also improves the suitability for multiple frequency shift keying (MFSK) and reduces the algorithm complexity.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.963-966
• /
• 2003

This paper proposes a new locking algorithm of the delay locked loop (DLL) which reduces the lock-acquisition time and eliminates false locking problem to enlarge the operating frequency range. The proposed DLL uses the modified phase frequency detector (MPFD) and the modified charge pump (MCP) to avoid the false locking problem. Adopting a new lock detector that measures delay between elects helps the fast lock-acquisition time greatly. The idea has been confirmed by HSPICE simulations in a 0.35-${\mu}{\textrm}{m}$ CMOS process.

• Journal of Environmental Health Sciences
• /
• v.13 no.1
• /
• pp.63-65
• /
• 1987

A study on detection rates of acid-fast bacteria in urine by three sampling methods was performed on 898 cases randomly sampled from peoples who visited Dr. Chung's Health Lab. from January to December, 1983. Positive rate by 5 times sampling of motring urine was 7.0% and 12.5% higher than that of 24 hours sampling. Therefore, 5 times sampling of morning urine method was considered to be desirable method for the test of ambulatory cases.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.49-52
• /
• 2002

This paper presents a fast algorithm for face detection from color images on internet. We use Mahalanobis distance between standard skin color and actual pixel color on IQ color space to segment skin color regions. The skin color regions are the candidate face region. Further, the locations of eyes and mouth regions are found by computing average pixel values on horizontal and vertical pixel lines. The geometry of mouth and eye locations is compared to the standard face geometry to eliminate false face regions. Our Method is simple and fast so that it can be applied to face search engine for internet.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.658-665
• /
• 2011

In the present paper, a novel fast peak detector for single- or three-phase unsymmetrical voltage sags is proposed. The proposed detector is modified from a single-phase digital phase-locked loop based on a d-q transformation using an all-pass filter (APF). APF generates a virtual phase with $90^{\circ}$ phase delay. However, this virtual phase cannot reflect a sudden change of the grid voltage in the moment of voltage sag, which causes a peak value to be significantly distorted and to settle down slowly. Specifically, the settling time of the peak value is too long when voltage sag occurs around a zero crossing, such as phase $0^{\circ}$ and $180^{\circ}$. This paper describes the operating principle of the APF problem and proposes a modified all-pass filter (MAPF) to mitigate the inherent APF problem. In addition, a new fast peak detector using MAPF is proposed. The proposed detector is able to calculate a peak value within 0.5 ms, even when voltage sag occurs around zero crossing. The proposed fast peak detector is compared with the conventional detector using APF. Results show that the proposed detector has faster detection time in the whole phase range. Furthermore, the proposed fast peak detector can be effectively applied to unsymmetrical three-phase voltage sags. Simulation and experimental results verify the advantages of the proposed detector and MAPF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.417-425
• /
• 2006

This Paper Proposes a method of building a panoramic video from several videos captured from adjacent cameras. The panoramic image which constructed from adjacent and overlapped images is used for photogrammetry, satellite photo or many computer graphic applications. The perspective transformation, which is estimated from the appropriate corresponding pairs of images, can be used to construct the panoramic image without unwarranted distortion and its quality is decided by how to find the features needed for transform estimation. We used the corner points for the corresponding features, and morphological structures were utilized for fast and robust corner detection. We used the criterion of the corner strength, which guarantees the robust detection of the corner in most situations. For the transformation, 8 parameters were estimated from perspective equations which use matched points of adjacent images, and bilinear color blending was used to construct a soapless panoramic video. The experiments showed that the proposed method yields fast results with good quality under various conditions.

• Journal of radiological science and technology
• /
• v.45 no.1
• /
• pp.57-67
• /
• 2022

CZT detectors, which are compound semiconductors that have been widely used recently for gamma-ray detection purposes, are difficult to detect neutrons because direct interaction with them does not occur unlike gamma-rays. In this paper, a method of detecting and determining energy levels (fast neutrons and thermal neutrons) of neutrons, in addition of identifying energy and nuclide of gamma-rays, and evaluating gamma dose rates using a CZT semiconductor detector is described. Neutrons may be detected by a secondary photoelectric effect or compton scattering process with a characteristic gamma-ray of 558.6 keV generated by a capture reaction (¹¹³Cd + ¹n → ¹¹⁴Cd + 𝛾) with cadmium (Cd) in the CZT detector. However, in the case of fast neutrons, the probability of capture reaction with cadmium (Cd) is very low, so it must be moderated to thermal neutrons using a moderator and the material and thickness of moderator should be determined in consideration of the portability and detection efficiency of the equipment. Conversely, in the case of thermal neutrons, the detection efficiency decreases due to shielding effect of moderator itself, so additional CZT detector that do not contain moderator must be configured. The CZT detector that does not contain moderator can be used to evaluate energy, nuclide, and gamma dose-rate for gamma-rays. The technology proposed in this paper provides a method for detecting both neutrons and gamma-rays using a CZT detector.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.1
• /
• pp.23-28
• /
• 2012

In this paper, we proposed and developed a fast and efficient real time face detection and recognition which can be run on embedded system instead of high performance desktop. In the face detection process, we detect a face by finding eye part which is one of the most salient facial features after applying various image processing methods, then in the face recognition, we finally recognize the face by comparing the current face with the prepared face database using a template matching algorithm. Also we optimized the algorithm in our system to be successfully used in the embedded system, and performed the face detection and recognition experiments on the embedded board to verify the performance. The developed method can be applied to automatic door, mobile computing environment and various robot.