• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.37.3-38
• /
• 2016

Recent studies suggest that faint active galactic nuclei may be responsible for the reionization of the universe. Confirmation of this scenario requires spectroscopic identification of faint quasars ($M_{1450}$ > -24 mag) at z > 6, but only a very small number of such quasars have been spectroscopically identified so far. Here, we report the discovery of a faint quasar IMS J220417.92+011144.8 at z ~ 6 in a $12.5deg^2$ region of the SA22 field of the Infrared Medium-deep Survey (IMS). The spectrum of the quasar shows a sharp break at ${\sim}8443{\AA}$, with emission lines redshifted to $z=5.944{\pm}0.002$ and rest-frame ultraviolet continuum magnitude $M_{1450}=-23.59{\pm}0.10$ AB mag. The discovery of IMS J220417.92+011144.8 is consistent with the expected number of quasars at z ~6 estimated from quasar luminosity functions based on previous observations of spectroscopically identified low-luminosity quasars. This suggest that the number of $M_{1450}$ ~ -23 mag quasars at z ~ 6 may not be high enough to fully account for the reionization of the universe. In addition, our study demonstrates that faint quasars in the early universe can be identified effectively with a moderately wide and deep near-infrared survey such as the IMS.

• Journal of the Korean earth science society
• /
• v.39 no.2
• /
• pp.131-138
• /
• 2018

The purpose of this study is to improve the quantitative precipitation estimation method based on satellite brightness temperature. The non-linear equation for rainfall estimation is improved by analysing precipitation cases around the Korean peninsula in summer. Radar reflectivity is adopted the CAPPI 1.5 and CMAX composite fields that provided by the Korea Meteorological Agency (KMA). In addition, the satellite data are used infrared, water vapor and visible channel measured from meteorological imager sensor mounted on the Chollian satellite. The improved algorithm is compared with the results of the A-E method and CRR analytic function. POD, FAR and CSI are 0.67, 0.76 and 0.21, respectively. The MAE and RMSE are 2.49 and 6.18 mm/h. As the quantitative error was reduced in comparison to A-E and qualitative accuracy increased in compare with CRR, the disadvantage of both algorithms are complemented. The method of estimating precipitation through a relational expression can be used for short-term forecasting because of allowing precipitation estimation in a short time without going through complicated algorithms.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.100-107
• /
• 2007

People have spent lots of time inside building about 90% of these day. Industry has been developed rapidly after I960. Construction materials had changed from natural materials to chemical materials and confidentiality of building has been more higher than before by policy of saving energy. These have caused sick-building syndrome (SBS) for us. So people want environmental construction materials for their house. We designed a environmental loess (yellow soil) finishing material which was composed of loess, water, water-soluble resin, hardener and filler. The purposes of this study were that making an environmental loess finishing material with optimum ratio, evaluating the usability of loess finishing material for wall. Furthermore it was suitable for wall to evaluate mechanical properties that are impact test, cracking test, abrasion test and de-bonding test, environmental properties that were emission of VOCs, formaldehyde and far infrared radiation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.82-88
• /
• 2013

In this project a preliminary experimental research work was done to apply mortars containing magnetite as fine aggregates unto floor finishing materials in order to make indoor environment eco-friendly and to have noiseproof control between floors. Crushed magnetites were substituted as sands in the mix design with a range of 0, 20, 40, 60, 100%. First far-infrared radiation tests to determine emissivity and emission power were done in accordance with the KICM test standard and an outstanding result was obtained. Density and compressive strength test results also showed that as the substitution increases, test values increase in a linear trend. However dry shrinkage test results revealed that as the substitution increases, shrinkage strain also increases. To clearly seek a solution about this problem, more experimental works should be done on oncoming experimental program.

• Publications of The Korean Astronomical Society
• /
• v.27 no.4
• /
• pp.353-356
• /
• 2012

We present new constraints on the cosmic optical background (COB) obtained from an analysis of the Pioneer 10/11 Imaging Photopolarimeter (IPP) data. After careful examination of the data quality, the usable measurements free from the zodiacal light are integrated into sky maps at the blue (${\sim}0.44{\mu}m$) and red (${\sim}0.64{\mu}m$) bands. Accurate starlight subtraction was achieved by referring to all-sky star catalogs and a Galactic stellar population synthesis model down to 32.0 mag. We find that the residual light is separated into two components: one component shows a clear correlation with the thermal $100{\mu}m$ brightness, whilst the other shows a constant level in the lowest $100{\mu}m$ brightness region. The presence of the second component is significant after all the uncertainties and possible residual light in the Galaxy are taken into account, thus it most likely has an extragalactic origin (i.e., the COB). The derived COB brightness is ($(1.8{\pm}0.9){\times}10^{-9}$ and $(1.2{\pm}0.9){\times}10^{-9}\;erg\;s^{-1}\;cm^{-2}\;sr^{-1}\;{\AA}^{-1}$ in the blue and red spectral regions, respectively, or $7.9{\pm}4.0$ and $7.7{\pm}5.8\;nW\;m^{-2}\;sr^{-1}$. Based on a comparison with the integrated brightness of galaxies, we conclude that the bulk of the COB is comprised of normal galaxies which have already been resolved by the current deepest observations. There seems to be little room for contributions from other populations including "first stars" at these wavelengths. On the other hand, the first component of the IPP residual light represents the diffuse Galactic light (DGL)-scattered starlight by the interstellar dust. We derive the mean DGL-to-$100{\mu}m$ brightness ratios of $2.1{\times}10^{-3}$ and $4.6{\times}10^{-3}$ at the two bands, which are roughly consistent with previous observations toward denser dust regions. Extended red emission in the diffuse interstellar medium is also confirmed.

• Journal of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.97-103
• /
• 2002

We have mapped 1 $deg^2$ region toward a high latitude cloud MBM 40 in the J = 1 - 0 transition of $^{12}CO$ and $^{13}CO$, using the 3 mm SIS receiver on the 14 m telescope at Taeduk Radio Astronomy Observatory. We used a high resolution autocorrelator to resolve extremely narrow CO linewidths of the molecular gas. Though the linewidth of the molecular gas is very narrow (FWHP < 1 km $s^{-1}$ ), it is found that there is an evident velocity difference between the middle upper part and the lower part of the cloud. Their spectra for both of $^{12}CO$ and $^{13}CO$ show blue wings, and the position-velocity map shows clear velocity difference of 0.4 km $s^{-1}$ between two parts. The mean velocity of the cloud is 3.1 km $s^{-1}$. It is also found that the linewidths at the blueshifted region are broader than those of the rest of the cloud. We confirmed that the visual extinction is less than 3 magnitude, and the molecular gas is translucent. We discussed three mass estimates, and took a mass of 17 solar masses from CO integrated intensity using a conversion factor $2.3 {\times} 10^{20} cm^{-2} (K\;km s^{-1})^{-1}$. Spatial coincidence and close morphological similarity is found between the CO emission and dust far-infrared (FIR) emission. The ratio between the 100 f.Lm intensity and CO integrated intensity of MBM 40 is 0.7 (MJy/sr)/(K km $s^{-1}$), which is larger than those of dark clouds, but much smaller than those of GMCs. The low ratio found for MBM 40 probably results from the absence of internal heating sources, or significant nearby external heating sources.

• Journal of the Korea Furniture Society
• /
• v.26 no.1
• /
• pp.77-91
• /
• 2015

The appeal of sauna is caused by the fact that through that, one can feel Korea's unique temperament and culture; however, because of its being a public facility and flooding of businesses due to excessive supplies of various additional features such as washing, playing, eating, sleeping and health care functions, issues of social resources and environment come to the fore, so it has reached a situation of red ocean that it is difficult to enter the market anymore. Taking these into account, this study focused on developing a thermal technology and design of the housing of an environment-friendly mobile home sauna, making the most use of the sauna's fundamental purpose and settling it as a tourist product, analyzing the marketing research on the existing sauna and considering the recent housing trends and lifestyles for a new concept sauna. Thus, regarding its characteristics and utilization, it was designed smaller than $10m^2$ (3 pyeong) so that it would be easy to install in any space and convenient to move. It can be installed in separate buildings and rest spaces such as country houses, resorts, pensions, camping grounds as well as outdoor houses, custom produced for a measure of pyeong that customers want so as to match up with the Enforcement Ordinance of the Agricultural Land Act in a concept of the farmer's hut and kitchen, bathroom and bathroom can be installed inside according to an option. In addition, regarding its efficacy, in order to give environment-friendly healing effects, materials such as Hinoki Cypress, red clay and hardwood charcoal were used, a fixed indoor temperature of $70{\sim}100^{\circ}C$ was maintained by heating methods such as electromagnetic wave free, energy saving and low-power boiler, and it was made to have excellent effects on fatigue recovery, relieving stress, skin care and diet through far-infrared emission.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.119-125
• /
• 2016

Fresh-cut agricultural products provide convenience to consumers. However, quality changes or microbial growth can easily occur due to physical changes such as cutting and peeling etc. during processing. Therefore, efforts have been made to develop a functional packaging for extension of shelf life of fresh-cut agricultural products, food etc., and researches on prolongation of storage period have been actively developed. The shelf life is extended by antimicrobial, far infrared rays, air permeability, anti-fogging, weak current, ethylene gas adsorption or decomposition, gas composition changes such as MA (Modified Atmosphere) or CA (Controlled Atmosphere). The method of extending the shelf life by various complex factors. This paper based on the published literature to extend the shelf life of fresh-cut agricultural products, food etc., The paper has summarized the storage period extension packing method, packaging material for shelf life extension and comprehensive evaluation method.

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.72-81
• /
• 2011

These days, beds have been developed not as furniture to sleep in but Healthcare Furniture. The function of heating, non-electronic-waves and far-infrared rays have been added. Also, eco-friendly materials such as stone, mud, rubber and wood are combined to them together with the radiation-heating method using heat conduction through electronic coil and hot water circulation. Modern people suffer from stress and fatigue. The hot issue is "health." Focused on the health, the development of design for beds considering the influence electronic waves, anions, deep sleep and the density of toxic materials have on human bodies has become urgent. In this study, the trend, specification and efficiency of the functional health-related electronic coil technology are analyzed. Through the analysis, the environmental standards are set. According to them, technology, eco-friendly materials and additional functions for the development of the design are considered. Also, the government is promoting the IEC international standardization for the Korean traditional floor heating style beds. In preparation for that, we adopted new HPT method technology. It enables non-electronic-waves, low electricity and stable temperature maintenance control for the warm top and the cool bottom. Also, the head boards and the frames of the beds can be separated. Through this separation, the beds can be easily moved or installed. Eco-friendly materials such as Hinoki cypress wood and red clay and the existing tables function are combined to the head boards so they can be used as drawers and display shelves. If they are used as separate items, they can be used as covers. This is how we suggest the design for the heating beds.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.1 s.120
• /
• pp.79-87
• /
• 2007

The objective of this study was to delineate forest patches in the cities around the Geum-buk mountains at the north of the Geum River using multiplesatellite remote sensing data. Landsat visible and near-infrared satellite images obtained at multiple dates in the growing season were used to create a forest distribution map. Fragstats 3.3 was used to get the landscape indices delineating the distribution of forest patches. Additional ground truth data was used to assess the accuracy of the classification. Factor analysis was used to get the 26 landscape indices clustered into 4 factors. Factor I was labeled as' size of forest patches', factor II as 'fragmentation of forest patches', factor III as 'shape of forest patches', and factor IV as 'complexity of forest patches'. Factor I described large patches and their core area, while others did small patches and their shape and complexity. Cities including Cheonan, Gongju, Cheongyang, and Boryeong near the main ridge of the Geumbuk Mtns. had a small number of large-sized forest patches. However, cities including Taean, Seosan, Dangjin, Hongseong near the ridge of the western Geumbuk Mtns. had a large number of small-sized forest patches. Finally, this study showed that the region near the coast line in Chung-nam province has various types of forest patches having an irregular forest edge due to the elevation and slope lower than the one of the region far from the coast line which is near the ridge of the Geum-buk Mountains. Remote sensing data were useful to understand the distribution of forest patches, and landscape indices could be keys to delineate the relationship between forest patches. And the factor analysis, which simplified 26 landscape indices into 4 landscape patterns allowed us to understand the distribution and relationship of forest patches in an easy way.