• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.346-355
• /
• 2020

The treatment of skeletal Class III malocclusion in adolescents is challenging. Maxillary protraction, particularly that using bone anchorage, has been proven to be an effective method for the stimulation of maxillary growth. However, the conventional procedure, which involves the surgical implantation of mini-plates, is traumatic and associated with a high risk. Three-dimensional (3D) digital technology offers the possibility of individualized treatment. Customized mini-plates can be designed according to the shape of the maxillary surface and the positions of the roots on cone-beam computed tomography scans; this reduces both the surgical risk and patient trauma. Here we report a case involving a 12-year-old adolescent girl with skeletal Class III malocclusion and midface deficiency that was treated in two phases. In phase 1, rapid maxillary expansion and protraction were performed using 3D-printed mini-plates for anchorage. The mini-plates exhibited better adaptation to the bone contour, and titanium screw implantation was safer because of the customized design. The orthopedic force applied to each mini-plate was approximately 400-500 g, and the plates remained stable during the maxillary protraction process, which exhibited efficacious orthopedic effects and significantly improved the facial profile and esthetics. In phase 2, fixed appliances were used for alignment and leveling of the maxillary and mandibular dentitions. The complete two-phase treatment lasted for 24 months. After 48 months of retention, the treatment outcomes remained stable.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.79-90
• /
• 2004

Rutting on asphalt pavement surface is an important damage in most roadways in the world. Most of researches have developed prediction model for rutting on asphalt pavement as a function of physical properties of asphalt binder. But this study was devised to estimate rutting based on fundamental properties of asphalt mixture, not binder. Therefore this study objective is to estimate rutting based on volumetric properties, that is Air void, Void in mineral aggregate(VMA) and Void filled with asphalt(VFA), of asphalt mixture with various asphalt binders, aggregates and aggregate gradation. Results showed that it was possible to estimate rutting depth based on volumetric variables of asphalt mixture. In addition, VMA, the variable which is nor used In mix design in Korea, showed a significant correlation with rutting, It is recommended that VMA is adapted as a variable in domestic mix design. Also, It showed that VFA in the specification should be lowered at least 5% point since VFA was somewhat higher than optimum.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.2 s.245
• /
• pp.202-209
• /
• 2006

As the economic power is improved and the customer's demand is hard to please, the noise and vibration is the most important yardstick that can determine the quality of the product. Especially, as the airconditioner's demand increase suddenly, the product of quality and the noise is becoming a decisive factor of determining whether purchase the product or not. Therefore, every manufactory is investing a lot of money and research to cut down the unpleasantness induced from noise and vibration. And they are emphasizing their product's difference by advertising a silence very actively. With these reason, the demand of a silent indoor air-conditioner is the essential research filed when the product is develop(:d. In this study, the noise and vibration is visualized in the space and frequency domain by using experimental methods such as operational deflection shape (ODS), modal testing and sound intensity. Also the location of noise source and its characteristic is analyzed in an acoustical point of view to reduce the structure borne noise that come from the fan motor, and the pertinent control method is suggested. Furthermore, the most suitable shape of the motor bracket is suggested by applying FEM and DOE (Design of experiments) in the noise and vibration point a view.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.658-664
• /
• 2002

This study was conducted to determine a proper feeding regime for lactating Holstein cows during the warm season in Taiwan. In Feeding Trial, 21 lactating Holstein cows were randomly allotted into three feeding regimes in a Completely Randomized Design. The feeding regimes were roughage fed ad libitum along with concentrate fed either twice daily (2C) or four times daily (4C), and total mixed ration (TMR) for 8 weeks. No significant differences among the three feeding regimes were found in body weight changes, and intakes in terms of dry matter, crude protein and net energy. For milk yield and 4% FCM yield, 4C were higher than the other two feeding regimes (p<0.05). No significant differences were found in milk compositions or differences noted in the yields of the respective milk components. TMR was worse than 2C and 4C (p<0.05) in milk production efficiencies in terms of dry matter intake per kg milk yield, crude protein intake per kg milk protein yield, as well as dry matter intake, net energy intake and crude protein intake per kg 4% FCM yield. Three ruminally fistulated Holstein dry cows were randomly assigned into the same three feeding regimes in a 3${\times}$3 Latin Square Design. No significant differences were found among the feeding regimes in ruminal pH, ammonia nitrogen, total VFA concentration, molar percentages of VFA, and acetic acid: propionic acid ratio (C$_2$/C$_3$). Taken all together, roughage fed ad libitum and concentrate fed four times daily was the better feeding regime for lactating cows during the warm season in Taiwan.

• Journal of KIISE:Databases
• /
• v.29 no.3
• /
• pp.193-206
• /
• 2002

In this paper, we design and implement an efficient bulk-loading algorithm for CIR-Tree. Bulk-loading techniques increase node utilization, improve query performance and reduce index construction time. The CIR-tree has variable size of internal node entries since it only maintains minimal dimensions to decriminate child nodes. This property increases fan-out of internal nodes and improves search performance. Even though several bulk-loading algorithms for multi/high-dimensional index structures have been proposed, we cannot apple them to CIR-tree because of the variable size of internal node entries. In this paper, we propose an efficient bulk- loading algorithm for CIR-tree that improves the existing bulk-loading algorithm and accomodates the property of CIR-tree. We also implement it on a storage system MiDAS-III and show superiority of our algorithm through various experiments.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.1
• /
• pp.3702-3711
• /
• 1975

This study was originated to investigate the imparired parts of the mist and dust blowers and intended to analyze the causes of their failures by the use of the Weibull probability paper. By the use of the paper, the parts which were needed to change the design, the force of the urgency, the mean time between failures of the parts and the basic causes of the troubles could be predicted. The survey showed that the following parts got out of order: (A) flexible rubber hose, (B) blowing fan, (C) lead valve, (D) piston ring. (E) crank main bearing, (F) coil in magneto and (G) needle valve in carburettor. The analysis of the survey indicated that the parts G, C, E and D were belonged to "wear-out failure", and that the mean time between failures became shorter in order as indicated above. To insure longer lives of those parts, it would be necessary to change the design and the material and to upgrade operators mechanical technique of the mist and dust blower. The failure of the parts A, B and F was classified as "randomfailure", and they did not seem to be the "wear-out" at that time. The parts B and F was evaluated as "initial failure". Quality controls and operating tests by the producer. and the operational training for users should be strengthened so as to eliminate these failures. Were the failures only in the parts A, C, D, E, F and G, it could be said that the "reliability" of the mist and dust blower would fall to 10 percent in the second year, and 50 percent of the mist and dust blowers would fail in all parts A, C, D, E, F and G before the blower would have control insect and disease in 58.2 hectares. The use of the Weibull probability paper for analyzing failures of the mist and dust blowers was effective in that it analyzed failure in the relationship between strength of the parts and users actual circumstanoes.

• Journal of Computational Design and Engineering
• /
• v.1 no.1
• /
• pp.27-36
• /
• 2014

Similar to the essential components of many mechanical systems, the geometrical properties of the teeth of spiral bevel gears greatly influence the kinematic and dynamic behaviors of mechanical systems. Logarithmic spiral bevel gears show a unique advantage in transmission due to their constant spiral angle property. However, a mathematical model suitable for accurate digital modeling, differential geometrical characteristics, and related contact analysis methods for tooth surfaces have not been deeply investigated, since such gears are not convenient in traditional cutting manufacturing in the gear industry. Accurate mathematical modeling of the tooth surface geometry for logarithmic spiral bevel gears is developed in this study, based on the basic gearing kinematics and spherical involute geometry along with the tangent planes geometry; actually, the tooth surface is a parametric surface defined on a parallelogrammic domain. Equivalence proof of the tooth surface geometry is then given in order to greatly simplify the mathematical model. As major factors affecting the lubrication, surface fatigue, contact stress, wear, and manufacturability of gear teeth, the differential geometrical characteristics of the tooth surface are summarized using classical fundamental forms. By using the geometrical properties mentioned, manufacturability (and its limitation in logarithmic spiral bevel gears) is analyzed using precision forging and multiaxis freeform milling, rather than classical cradle-type machine tool based milling or hobbing. Geometry and manufacturability analysis results show that logarithmic spiral gears have many application advantages, but many urgent issues such as contact tooth analysis for precision plastic forming and multiaxis freeform milling also need to be solved in a further study.

• Journal of Fashion Business
• /
• v.22 no.1
• /
• pp.82-99
• /
• 2018

The purpose of this study is to examine the characteristics that appeared in the fashion and colors of exotic tastes used by Renoir with a view to re-evaluating his-attitude towards exotic tastes. The methods used in this study were literature research and analysis of visual data from Renoir's works. The results of the study are as follows. Renoir's exotic tastes originated from the material perspective appearing in the fashions and accessories of Algeria, Orient, Spain, and Japan. Parisienne Odalisque Lise in Harem-style, Jeanne Samari in parisienne fashion holding a Japanese fan, and Gabriel in oriental fashion were portrayed as major muses. The Algerian style consisted of white, yellow or red veils, thobes, loose pants worn in Haik, and burnous. The Oriental-style was composed of harem pants, turbans, hair accessories, ornate zouave jackets, and oriental ornaments. The Spanish-style showed gay ornaments, fitted red or yellow matador costume, red bandannas, black hats, and red dresses, plus Spanish guitars. The Japanese-style consisted of kimonos, accessories such as fans, and backgrounds with interior articles such as vases, wall picture frames, and folding screens. The exotic fashion colors were red, yellow and white. Renoir expressed the works with his delicate skills and sense of craftsmanship, and he even added creative design portrayals sometimes. He selected fashions and accessories of exotic tastes as objects and expressed the objects with materials and colors reflecting regional characteristics as such, he can be regarded as an artist wed to who fashions of exotic tastes.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3635-3642
• /
• 2021

Natural circulation systems (NCSs) are extensively applied in nuclear power plants because of their simplicity and inherent safety features. For some passive natural circulation systems in floating nuclear power plants (FNPPs), the ocean is commonly used as the heat sink. Condensation induced water hammer (CIWH) events may appear as the steam directly contacts the subcooled seawater, which seriously threatens the safe operation and integrity of the NCSs. Nevertheless, the research on the formation mechanisms of CIWH is insufficient, especially in NCSs. In this paper, the characteristics of flow rate and fluid temperature are emphatically analyzed. Then the formation types of CIWH are identified by visualization method. The experimental results reveal that due to the different size and formation periods of steam slugs, the flow rate presents continuous and irregular oscillation. The fluid in the horizontal hot pipe section near the water tank is always subcooled due to the reverse flow phenomenon. Moreover, the transition from stratified flow to slug flow can cause CIWH and enhance flow instability. Three types of formation mechanisms of CIWH, including the Kelvin-Helmholtz instability, the interaction of solitary wave and interface wave, and the pressure wave induced by CIWH, are obtained by identifying 67 CIWH events.

• Journal of Preventive Medicine and Public Health
• /
• v.51 no.6
• /
• pp.320-325
• /
• 2018

Objectives: This pilot study tested the effectiveness of a brief alcohol-related intervention delivered by the social media app WeChat to teach about ethanol-induced facial flushing and increase the willingness of students who see another student flushing to suggest that he or she should reduce or stop drinking. In the context of Chinese drinking culture, it is sometimes socially difficult to refuse a drink, even when experiencing physical discomfort, such as flushing. Methods: Classrooms of students in a medical university in China were randomly assigned to the intervention or control group. Students in the intervention group were invited to view 3 alcohol education lessons on WeChat during a 2-week period. A pretest and posttest before and after the 2-week period assessed changes in students' willingness to intervene if they saw someone flush while drinking. Data were collected about students' alcohol use and their ratings of the lessons. Results: Mixed-design analysis of variance yielded a significant time-by-treatment interaction effect on the variable of willingness to suggest that a flushing person stop or slow down their drinking, and the change was significant between the intervention and control groups. One-way analysis of covariance yielded a significant treatment effect at the posttest, after controlling for the pretest score. Students rated the lessons above the midpoint of the scale for being informative, interesting, and useful. Conclusions: The pilot study showed that a brief alcohol-related intervention delivered by WeChat could produce a measurable positive change in the willingness of university students to suggest that a student who flushes should stop drinking. This pilot study also suggested improvements for future lessons and evaluation design.