• Journal of the Korean Society for Nondestructive Testing
• /
• 제29권5호
• /
• pp.485-492
• /
• 2009

The thermal fatigue crack(TFC) is one of the life-limiting mechanisms at the nuclear power plant operating conditions. In order to evaluate the structural integrity, various non-destructive test methods such as radiographic test, ultrasonic test and eddy current are used in the industrial field. However, these methods have restrictions that defect detection is possible after the crack growth. For this reason, acoustic emission testing(AET) is becoming one of powerful inspection methods, because AET has an advantage that possible to monitor the structure continuously. Generally, every mechanism that affects the integrity of the structure or equipment is a source of acoustic emission signal. Therefore the noise filtering is one of the major works to the almost AET researchers. In this study, acoustic emission signal was collected from the pipes which were in the successive thermal fatigue cycles. The data were filtered based on the results from previous experiments. Through the data analysis, the signal characteristics to distinguish the effective signal from the noises for the TFC were proven as the waveform difference. The experiment results provide preliminary information for the acoustic emission technique to the continuous monitoring of the structure failure detection.

• Journal of the Korean earth science society
• /
• 제22권5호
• /
• pp.339-349
• /
• 2001

The aim of this study is to explore effective teaching strategies through an investigation of the problem-solving abilities and reasons for the unsuccessful problem solving of pre-service teachers. The participants of the study were 60 pre-service teachers who were expected to teach earth science in elementary school (40) and secondary school (20). The participants had taken a course in astronomy before they took part in the present study. The instruments for the study were a paper-and-pencil test and interviews. The results demonstrated that the pre-service teachers' abilities to solve problems were low. The pre-service teachers of the elementary school were inferior to those of the secondary school in their problem solving abilities. The causes for the unsuccessful problem solving were identified as follows: (1) lack of prerequisite knowledge to understand the motions of the moon and the planets, (2) failure to represent problems based on solution principles, (3) failure to apply the knowledge acquired in one setting to another, different setting, (4) frames of reference the frameworks for everyday life situation and for earth science problem situation, and (5) rote-memorization of facts rather than understanding the cause-and-effect relationships. The above causes for unsuccessful problem solving seemed to be related to the characteristics of novice problem solvers in general and of the tasks about the motions of the moon and the planets. Suggestions are made to enhance pre-service teachers' problem solving abilities based on the result of the study.

• Journal of Korean Neurosurgical Society
• /
• 제50권2호
• /
• pp.99-102
• /
• 2011

Objective : The purpose of this retrospective study was to evaluate the outcome of gamma knife radiosurgery (GKRS) and/or whole brain radiation therapy (WBRT) for the treatment of small cell lung carcinoma (SCLC) metastasis to the brain. Methods : From 2000 to 2010, 50 patients underwent GKRS for metastatic brain lesions originating from SCLC. Among these patients, 11 received prophylactic cranial irradiation (PCI) before the development of metastatic lesions (PCI group), and GKRS was performed as an initial treatment for newly diagnosed lesions in 12 patients who had not received PCI (primary GKRS group). In addition, GKRS was performed as a salvage treatment for progressive lesions after WBRT in 27 patients (salvage GKRS group). The medical records and imaging data of all patients were retrospectively analyzed. Results : The overall survival of the 50 patients was 20.8 months (range 1-53) after the diagnosis of primary tumor and 12.0 months (range 1-47) after the development of cerebral metastasis. Median survival after GKRS was 4.8 months (range 1-15) in the PCI group, 4.6 months (range 0-18) in the primary GKRS group, and 7.6 months (range 0-33) in the salvage GKRS group. Further treatment for progressive lesions after GKRS was necessary in 15 patients, after a mean interval of 3.8 months. Causes of death were systemic organ failure in 15 patients, deterioration of neurological state in 13 patients, and unknown or combined causes in 16 patients. The local control rate of the lesions treated with GKRS was 76.4% (decreased in 13 patients and stable in 16 patients at the final imaging follow-up (mean 5.60 months). Conclusion : GKRS is an effective local treatment for brain metastasis from SCLC both as an initial treatment for newly diagnosed lesions after PCI and as a salvage treatment for recurrent or progressive lesions. However, the survival benefit is not significant because most patients die of systemic multi-organ failure with a short life expectancy.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제27권1호
• /
• pp.63-77
• /
• 2015

Tsunami take away life, wash houses away and bring devastation to social infrastructures such as breakwaters, bridges and ports. The coastal structure targeted object in this study can be damaged mainly by the wave pressure together with foundation ground failure due to scouring and liquefaction. The increase of excess pore water pressure composed of oscillatory and residual components may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, the bore was generated using the water level difference, its propagation and interaction with a vertical revetment analyzed by applying 2D-NIT(Two-Dimensional Numerical Irregular wave Tank) model, and the dynamic wave pressure acting on the seabed and the surface boundary of the vertical revetment estimated by this model. Simulation results were used as input data in a finite element computer program(FLIP) for elasto-plastic seabed response. The time and spatial variations in excess pore water pressure ratio, effective stress path, seabed deformation, structure displacement and liquefaction potential in the seabed were estimated. From the results of the analysis, the stability of the vertical revetment was evaluated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제11권4호
• /
• pp.1178-1185
• /
• 2010

Recently, high speed of container freight cars is causing fatigue damage of wheel. Sudden failure accidents cause a lot of physical and human damages. Therefore, damage analysis for wheel prevents failure accident of container freight car. Wheel receives mechanical and thermal loads at the same time while rolling stocks are run. The mechanical loads applied to wheel are classified by the horizontal load from contact of wheel and rail in curve line section and by the vertical force from rolling stocks weight. Also, braking and deceleration of rolling stocks cause repeated thermal load by wheel tread braking. Specially, braking of rolling stocks is frictional braking method that brake shoe is contacted in wheel tread by high breaking pressure. Frictional heat energy occurs on the contact surface between wheel tread and brake shoe. This braking converts kinetic energy of rolling stocks into heat energy by friction. This raises temperature rapidly and generates thermal loads in wheel and brake shoe. There mechanical and thermal loads generate crack and residual stress in wheel. Wetenkamp estimated temperature distribution of brake shoe experimentally. Donzella proposed fatigue life using thermal stress and residual stress. However, the load applied to wheel in aforementioned most researches considered thermal load and mechanical vertical load. Exact horizontal load is not considered as the load applied to wheel. Therefore, above-mentioned loading methods could not be applied to estimate actual stress applied to wheel. Therefore, this study proposed safety estimation on wheel of freight car using heat-structural coupled analysis on the basis of loading condition and stress intensity factor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권8호
• /
• pp.3602-3610
• /
• 2013

The risk of failure in the development of modern weapon systems has been increasing as the demand on the capability and the resulting complexity of the weapons on the war fields are increasing drastically. The analysis of failure has indicated that the main causes can be the following: one is attributed to the unsatisfaction of the system operation concept; and the other is the use of premature technology. As such, DAPA in Korea is urging that the weapons systems development should meet the required operational capability (ROC) as a critical performance requirement. On the other hand, an approach to risk management is to use the technology readiness level (TRL) assessed for each individual technology alone. However, the method of TRL cannot assess the effect of integration between technologies and cannot be performed at system level, which is crucial to systems development. In order to improve the shortfalls, a concept of system readiness level (SRL) has been studied by introducing the technologies integration and also some forms of analysis of advanced degree of difficulty studied separately, but no model considering both of two reported yet. In this paper, under the framework of meeting the ROC, an improved SRL assessment model is presented, which is also considering the advanced degree of difficulty simultaneously. The application of the improved assessment method is discussed in connection with the life cycle of the weapon systems development in conformance with the ROC of DAPA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권10호
• /
• pp.4893-4901
• /
• 2013

In order for a machine, especially used in the defense industry, to consistently operate during its life-time, lots of study has been done in machine design as well as machine maintenance. However, the realistic study is necessary in management and operation of a military support facility, where spare parts are stored and retrieved. In this paper, efficient arrangement of spare parts are proposed to acquire increased in efficiency and decreased in cost for operation management of the military support facility. First, spare parts is assorted by MTBF(Mean Time Between Failure) and divided in to three groups A/B/C as an alternative arrangement. Each defined alternatives will go under simulations and RULA(Rapid Upper Limb Assessment), which is posture classification scheme evaluation attributes, to find working time and posture difficulty and lastly by entropy measurement to be selected. This research proposes the efficient spare parts arrangement in military support facility to minimize working time and posture difficulty. By taking system and human engineering approach together into consideration, it will lead to show a specific value.

• Journal of Chest Surgery
• /
• 제35권9호
• /
• pp.680-683
• /
• 2002

Infective endocarditis that involves the right side of the heart has been estimately 5% of all cases of infective endocarditis. It has been shown that about 70% of right-sided heart infective endocarditis cases have preexisting congenital heart disease or acquired valvular lesion. It would occur in intravenous drug users or end-stage renal disease patients with indwelling venous dialysis catheter. Antibiotic therapy is more effective in the right and, when it fails, the consequence of valve disruption and emboli are less. Patients receiving long-term hemodialysis are a unique population with regard in the risk of bacteremia and subsequent infective endocarditis. We experienced one case of the active infective endocarditis with right atrial vegetation without tricuspid or pulmonary valve involvement in patient with end-stage renal disease receiving long-term hemodialysis, who needed surgical correction after medical treatment failure. Then we reported it with references that right-sided heart infective endocarditis is rare, but difficult to diagnose, life-threatening because of delayed medical treatment.

• Korean Journal of Social Welfare
• /
• 제37권
• /
• pp.1-31
• /
• 1999

In Korea, little is known about unemployment duration and exit rate from unemployment. This paper empirically examines the duration of unemployment using data for the years 1996 and 1997 on unemployed individuals who are eligible for unemployment insurance benefits in Korea. A parametric survival model (log-normal model) is adopted to identify factors predicting transitions to reemployment. Factors that affect unemployment duration are sex, age, employment duration (year), prior salary, region, prior employment industry, cause of unemployment, officially determined unemployment benefit duration, degree of benefit exhaustion, and amount of benefits for early reemployment. However, education is not statistically significant In degree of benefit exhaustion, the exit rate from unemployment decreases as benefit exhaustion is approached. In amount of benefits for early reemployment, the exit rate from unemployment increases as amount of benefits increases. Hazards for reemployment gradually increase until 80 days after unemployment and gradually decrease in the following period. Thus, we find that distribution of hazards for reemployment has log-normal shapes between inverted U and inverted L This paper takes advantage of a unique analysis about unemployment duration and exit rate from unemployment in the Korean Unemployment Insurance system which functions as the most valuable social safely-net mechanism in the recent national economic crisis. Indeed, this paper provides a basic knowledge about realities of unemployed individuals in the Unemployment Insurance system and identifies research areas that require further study.

• Applied Biological Chemistry
• /
• 제38권2호
• /
• pp.135-140
• /
• 1995

Changes in pH of the soaking solution and physical properties of the soybean curd during immersing in solution of different concentrations at different temperatures were determined. Compared with $0{\sim}3%$ NaCl soaking solution, 5% NaCl soaking solution distinctively reduced the pH drop, increasing rate of turbidity and microorganism growth during storage. This indicated the concentration of soaking solution influences the shelf life of curd. As the storage temperature was lowered to $5^{\circ}C$, their changing rates were also reduced. Physical properties such as initial stress $({\sigma}_0)$, elastic constant (E), viscous constant $({\eta})$ and failure test were influenced by storage temperature, but not a function of concentration of salt solution. The result of the sensory test indicated the hardness and salty taste of curd were statistically significant among samples and $1{\sim}5%$ NaCl solutions did not show any significant difference in the salty taste.