• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.40-50
• /
• 2017

Compared to the traditional format, the revised IPA is an effective method for selecting a management strategy as compared to the traditional IPA. Comparison between the traditional IPA and revised IPA with a management strategy has been, however, limited. Therefore, the difference between the traditional IPA and revised IPA was compared to select an effective management strategy in the Suncheon Bay Wetland Reserve. First of all, related papers were reviewed to select an appropriate revised IPA. It was found that Deng (2007)'s revised IPA was appropriate for quantifying service quality and a management strategy that affects the measurable satisfaction of visitors in the space. Second, the results of the traditional IPA were compared with the revised IPA in the Suncheon Bay Wetland Reserve and the management strategy of the revised IPA and the changes of management factors were discussed. It was found that some management factors deviated from the order of the quadrant "low priority for managers", "Concentrate management here", "Keep up the good work" were moved to the order of the quadrants "Concentrate management here", "low priority for managers" and "Possible overkill" in the revised IPA grid. The complexity as a management factor resulted in higher demand management than the traditional IPA, which moved from "low priority for managers" to "Concentrate management here". Management factors resulted in lower demand management than the traditional IPA moved from "Concentrate management here" to "low priority for managers"; these consisted of shade trees, exhibition exteriors, programs, and a guided tour. Also, management factors moved from "Keep up the good work" to "Possible overkill" consisted of relaxation facilities, glow of the setting sun, a hedge, and an exhibition interior. Over all, the revised IPA responded properly to changes in the measurable satisfaction of visitors to the Suncheon Bay Wetland Reserve. Therefore, a revised IPA should be provided for accurate and reliable guidelines when decision makers establish management strategies.

• The Korean Journal of Malacology
• /
• v.23 no.2
• /
• pp.217-225
• /
• 2007

This study was conducted to estimate the general genetic parameters, heritabilities, and genetic and phenotypic correlations on growth-related traits by studying multiple trait animal model in two Korean abalone species, Haliotis discus hannai and H. discus discus. The data was collected from the records of 3,795 individuals produced from 54 sires and 74 dams in Haliotis discus hannai and 399 individuals produced from 7 sires and 7 dams in Haliotis discus discus. The data was evaluated by the Genetics and Breeding Research Center, National Fisheries Research & Development Institute (NFRDI). Genetic parameters were estimated for two abalone species raised in Bukjeju branch, NFRDI, from May 20 to November 1, 2004. The heritability estimates for growth traits of shell length, shell width and body weight obtained from restricted maximum likelihood (REML) were ranging from 0.73 to 0.78 in Haliotis discus hannai, and from 0.87 to 0.89 in H. discus discus. The heritabilities for shell shape and condition factor were ranging from 0.17 to 0.20 in Haliotis discus hannai, and from 0.01 to 0.45 in H. discus discus. Genetic and phenotypic correlations were over than 0.96 between shell parameters and weight in both of abalone subspecies, indicating that breeding for weight gains could successfully be achieved by selecting for shell length.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.45-53
• /
• 2015

These days Container Terminals are focusing on increasing the quantity of containers and shipping lines choose Terminals by referring to the key elements of a terminal to perform the overall operation the fastest such as the location of the terminal, discharging ability, keeping environment, and other elements related to shipping in general. Container terminal is able to offer On-Dock service has become an important factor for shipping lines to choose that terminal. In this paper, we propose an algorithm for On-Dock system work algorithm, the algorithm Empty container exports, Full Container algorithm and The aim of our study focus on both container's gate out time and search for the effective terminal operation which is using the general On-Dock system through several algorithm like container batch priority, gate in and out job priority and empty container yard equipment allocation rule based on the automatic allocation method and manual allocation scheme for container. Gathering these information, it gives the priority and yard location of gate-out containers to control. That is, by selecting an optimum algorithm container, container terminals Empty reduces the container taken out time, it is possible to minimize unnecessary re-handling of the yard container can be enhanced with respect to the efficiency of the equipment. Operations and operating results of the Non On-Dock and On-Dock system is operated by the out work operations (scenarios) forms that are operating in the real Gwangyang Container Terminal derived results. Gwangyang Container terminal and apply the On-Dock system, Non On-Dock can be taken out this time, about 5 minutes more quickly when applying the system. when managing export orders for berths where On-Dock service is needed, ball containers are allocated and for import cargoes, D/O is managed and after carryout, return management, container damage, cleaning, fixing and controlling services are supported hence the berth service can be strengthened and container terminal business can grow.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.33-42
• /
• 2014

Purpose: I-131 scan using High Energy (HE) collimator is generally used. While, Medium Energy (ME) collimator is not suggested to use in result of an excessive septal penetration effects, it is used to improve the sensitivities of count rate on lower dose of I-131. This research aims to evaluate I-131 SPECT/CT image quality using by HE and ME collimator and also find out the possibility of ME collimator clinical application. Materials and Methods: ME and HE collimator are substituted as Siemens symbia T16 SPECT/CT, using I-131 point source and NEMA NU-2 IQ phantom. Single Energy Window (SEW) and Triple Energy Windows (TEW) are applied for image acquisition and images with CTAC and Scatter correction application or not, applied different number of iteration and sub set are reconstructed by IR method, flash 3D. By analysis of acquired image, the comparison on sensitivities, contrast, noise and aspect ratio of two collimators are able to be evaluated. Results: ME Collimator is ahead of HE collimator in terms of sensitivity (ME collimator: 188.18 cps/MBq, HE collimator: 46.31 cps/MBq). For contrast, reconstruction image used by HE collimator with TEW, 16 subset 8 iteration applied CTAC is shown the highest contrast (TCQI=190.64). In same condition, ME collimator has lower contrast than HE collimator (TCQI=66.05). The lowest aspect ratio for ME collimator and HE collimator are 1.065 with SEW, CTAC (+) and 1.024 with TEW, CTAC (+) respectively. Conclusion: Selecting a proper collimator is important factor for image quality. This research finding tells that HE collimator, which is generally used for I-131 scan emitted high energy ${\gamma}$-ray is the most recommendable collimator for image quality. However, ME collimator is also applicable in condition of lower dose, lower sensitive if utilizing energy window, matrix size, IR parameter, CTAC and scatter correction appropriately.

• Research in Plant Disease
• /
• v.30 no.3
• /
• pp.229-235
• /
• 2024

Conidial production is a critical factor in testing pathogenicity and studying the physiology and ecology of fungal pathogens. Therefore, selecting an appropriate condition and medium for consistent conidia production is essential. In this study, we investigated light conditions and suitable medium conditions using the slide culture method to establish optimal conditions for continuous spore acquisition of Bipolaris oryzae. Primarily, we observed conidial production using two B. oryzae isolates, CM23-042 and 23CM10, under two different light conditions: (1) consistent near-ultraviolet (NUV) with fluorescent light, and (2) a 12-hr shift of the NUV-dark cycle. Secondly, we examined conidial formation under seven different media on potato dextrose agar (PDA), V8-Juice agar, minimal medium (MM), sucrose-proline agar (SPA), rabbit food agar (RFA), rice bran agar (RBA), and rice leaf agar (RLA). Under consistent NUV light with fluorescent conditions, conidia were induced in both isolates, whereas conidia were not produced under other conditions after 7 days post-inoculation (dpi). Moreover, B. oryzae isolate CM23-042 produced the highest number of conidia in MM, while isolate 23CM10 yielded the highest number of conidia in PDA after 7 dpi. In summary, our data demonstrated that the consistent NUV light with fluorescent conditions were most conducive for conidia induction in B. oryzae. The selection of a medium for conidiation may vary depending on the B. oryzae isolates, but using MM and PDA or SPA and RFA medium could be effective for spore induction. These findings will contribute to improving conidiation according to the characteristics of collected isolates of B. oryzae.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.60-73
• /
• 2011

Since Jeju Ollegil opened in September 2007 and attracted the sensation of popularity throughout the country, the interest in 'Walking Trails' has increased, and the central ministries and the local governments composite and assign various 'Walking Trails'. Walking trails are not tours on which people go to see one spot and move to another spot by vehicle, but a long linear journey that leads people to see, to feel and to experience a region's landscape and culture while walking on the trail. 'Walking Trails' are efficient routes to discover and to use a former way and to link the various ecological regions' histories and cultural resources, so it is most important to select a route. Although the routes were selected by considering the various planning factors and giving each route a specified theme, some problems like the inconvenience of visitors caused by lack of facilities have occurred. After designation and construction of the trails, they were not properly evaluated by visitors. Therefore, it is the purpose of this study to suggest a better way to construct the trails by surveying visitor satisfaction and by analyzing the impact of planning a route on visitor satisfaction at Bukhansan Dulegil which was completed. For this study, with a questionnaire based on the literature review to identify the important planning factors for selecting a route, a survey was conducted on visitor satisfaction for each section and their intention to revisit and to recommend that trail. Based on the characteristics of each section that was identified in the field research, the trails were classified into five types and satisfaction of each type and each type was analyzed. In addition, analyzing the impact of planning factors on satisfaction, the impact of satisfaction on revisiting and recommending and visitors' perception of the theme, further improvement for better construction of the trail was presented. Satisfaction of sectors with strong natural elements was higher; 'walking comfort' was the highest planning factor affecting satisfaction. In addition, satisfaction was surveyed to have high influence on revisiting and recommending.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.261-277
• /
• 2017

This study defines influencing sections as the part of the road section where passing vehicles are traveling with the lower speed compared to speed limit due to speed humps. The influencing section was divided into 3 parts; influencing section before the speed hump, interval section, and influencing section after the speed hump. This analysis focused on the changes of each part depending on installation types, vehicle types, and daytime or nighttime. For the interval section, especially, the ratio of distance traveled with lower speed than speed limit to interval section is defined as effective influencing section ratio to be analyzed. Vehicle speed profiles were collected with a speed gun to extract influencing section lengths. The survival analysis was applied and estimated survival functions are compared with each other by several statistical tests. As a consequence, the average length of influencing section on the 50m sequential speed humps was 75.3% longer during the deceleration than that of isolated speed hump, and 18.9% during the acceleration. The effective influencing section ratio for the 30m and 50m sequential speed humps had a small difference of 81.0% and 76.0% while the absolute values of the section that passing speed were less than the speed limit were longer on 50m sequential speed humps, each being 24.3m and 38.0m. Using the log rank test, it was evident that sequential speed humps were more effective to increase the length of influencing sections compared to the isolated speed hump. Vehicle type was the strong factor for influencing section length on the isolated speed hump, but daytime or nighttime was not the effective one. This research result can be used for improving the efficiency selecting the installation point of speed humps for road safety and estimating the standard of the distance between sequential speed humps.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.113-119
• /
• 2007

This study attempts to find factors contributing to the use pattern of prosthetics by investigating the current condition of prosthetics for the aged of over 65 years old by place of practice. Among those of over 65 years old who live in Gangnam-gu, Seocho-gu, Seongbuk-gu, and Gwanak-gu of Seoul and use the apartment senior's center, those having prosthetics were selected as subjects of this study, and this study was conducted in forms of interview and record. Findings of this study are summarized as follows: First, in regard of the state of prosthetics and relevant symptoms in the mouth according to the place of prosthetics practice, there was significant difference in the questions except the medical benefit of prosthetics between unlicensed facilities and dental clinics and hospitals. Second, regarding difference in satisfaction according to the place of prosthetics practice, dental clinics and hospitals showed a higher level of aesthetic satisfaction than unlicensed facilities. For difference in satisfaction at pronunciation, chewing, pain, a sense of foreign body, and holding power, dental clinics and hospitals showed a higher level than unlicensed facilities, Third, after factor analysis on the perception factors of unlicensed treatment and dental treatment, unlicensed facilities showed the highest level of reliability, and then convenience, word of mouth, and modernity in order. Dental clinics and hospitals also showed the highest level of reliability, however, and then convenience, modernity, and word of mouth in order. Fourth, as a consequence of analyzing the factors to influence the use pattern of prosthetics, regarding residential pattern, there were higher possibilities to use dental clinics and hospitals when the subjects lived together with their children and in Gangnam, and the more were the number of pyeong for the residence, pocket money, medical expense, and property in their name, compared to unlicensed facilities. In conclusion, economic factors appear to be the most important factors in selecting facilities for denture prosthodontics. Therefore, it is important to ensure the denture prosthodontics for the elderly are reimbursable so that they can enjoy a healthier life.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.237-262
• /
• 2022

There has been a growing interest in IPOs (Initial Public Offerings) due to the profitable returns that IPO stocks can offer to investors. However, IPOs can be speculative investments that may involve substantial risk as well because shares tend to be volatile, and the supply of IPO shares is often highly limited. Therefore, it is crucially important that IPO investors are well informed of the issuing firms and the market before deciding whether to invest or not. Unlike institutional investors, individual investors are at a disadvantage since there are few opportunities for individuals to obtain information on the IPOs. In this regard, the purpose of this study is to provide individual investors with the information they may consider when making an IPO investment decision. This study presents a model that uses machine learning and text analysis to predict whether an IPO stock price would move up or down after the first 5 trading days. Our sample includes 691 Korean IPOs from June 2009 to December 2020. The input variables for the prediction are three tone variables created from IPO prospectuses and quantitative variables that are either firm-specific, issue-specific, or market-specific. The three prospectus tone variables indicate the percentage of positive, neutral, and negative sentences in a prospectus, respectively. We considered only the sentences in the Risk Factors section of a prospectus for the tone analysis in this study. All sentences were classified into 'positive', 'neutral', and 'negative' via text analysis using TF-IDF (Term Frequency - Inverse Document Frequency). Measuring the tone of each sentence was conducted by machine learning instead of a lexicon-based approach due to the lack of sentiment dictionaries suitable for Korean text analysis in the context of finance. For this reason, the training set was created by randomly selecting 10% of the sentences from each prospectus, and the sentence classification task on the training set was performed after reading each sentence in person. Then, based on the training set, a Support Vector Machine model was utilized to predict the tone of sentences in the test set. Finally, the machine learning model calculated the percentages of positive, neutral, and negative sentences in each prospectus. To predict the price movement of an IPO stock, four different machine learning techniques were applied: Logistic Regression, Random Forest, Support Vector Machine, and Artificial Neural Network. According to the results, models that use quantitative variables using technical analysis and prospectus tone variables together show higher accuracy than models that use only quantitative variables. More specifically, the prediction accuracy was improved by 1.45% points in the Random Forest model, 4.34% points in the Artificial Neural Network model, and 5.07% points in the Support Vector Machine model. After testing the performance of these machine learning techniques, the Artificial Neural Network model using both quantitative variables and prospectus tone variables was the model with the highest prediction accuracy rate, which was 61.59%. The results indicate that the tone of a prospectus is a significant factor in predicting the price movement of an IPO stock. In addition, the McNemar test was used to verify the statistically significant difference between the models. The model using only quantitative variables and the model using both the quantitative variables and the prospectus tone variables were compared, and it was confirmed that the predictive performance improved significantly at a 1% significance level.

• Korean Journal of Environment and Ecology
• /
• v.34 no.5
• /
• pp.491-499
• /
• 2020

Increasing impervious surfaces can cause various physical and mental illnesses as well as further problems like deterioration of the thermal environment and disconnection of the water circulation system in the downtown area. This study is intended to suggest baseline data for the future creation or remodelation of large-scaled urban parks in consideration of human health on the aspect of climate by analyzing air ions condition and correlation analysis between air ions and meteorological elements depending on distances from the center in the urban park. The study site was divided into four types by distances from the center of Olympic Park in Songpa-gu, Seoul, then classified as A and B. After selecting 80 points to record, land coverage and vegetation status were investigated, and then meteorological elements and air ions were measured. First, the green space rate by section is A section Center (90%)> Inner (70%)> Outer-inner (10%) = Outer (10%), B section Center (100%)> Inner (60%)> Outer- In order of inner (30%)> Outer (0%). Second, for weather factors, the temperature was analyzed by Outer (24.18℃) > Outer-inner (22.90℃) > Inner (22.43℃) > Center (21.719℃). For relative humidity, center (46.49%) > Inner (43.36%) > Outer-inner (42.41%) > Outer (38.53%) was analyzed. Third, In the case of cations in the air ions, Outer(435.71ea/㎤) > Outer-inner(415.16ea/㎤) > Inner (389.46ea/㎤) > Center (352.64ea/㎤). In the case of negative ions, Center (569.72ea/㎤) > Inner (499.83ea/㎤) > Outer-inner(410.58ea/㎤) > Outer (292.02ea/㎤). It was analyzed to increase toward Center, and analyzed to decrease with increasing distance from road. For the Air ion index, it was analyzed as Center (1.67) > Inner (1.31) > Outer-inner (1.08) > Outer (0.71). Negative irons was analyzed to increase when its measuring points close to the center and decrease with shortening distance to the road. Fourth, as a result of correlation analysis, positive(+) correlation is negative ions and ion index. These were measured to increase as the recording points closing to the center of the park from the road. The negative(-) correlation is temperature, solar radiation, and positive ions. These increased as getting closer to the road.