• Journal of The Korea Institute of Healthcare Architecture
• /
• v.20 no.4
• /
• pp.67-80
• /
• 2014

Purpose : Long-term Care Insurance sets up facility standard and installation standard of aged care facilities and decides the presence of minimum number of rooms and its size in care facilities by using systematic instruments. Therefore, most aged care facilities had renovation in expansion and reconstruction following the revised regulations and even facility space structure and space composition are continuously improving. The study is to determine the purpose and trend by comparing before and after space composition of facilities which followed the implementation of Long-term Care Insurance and also to suggest hierarchical space composition suitable for aged care facilities through derived problems and to provide basic materials to plan the most appropriate facility for the aged. Methods : J-graph based on Space Syntax Theory will be schematized through in-site facility survey and before and after facility floor plan. Space composition trend will be analyzed by comparing indexes through S3 program. Results : As a result of 5 cases analysis, the following results were found; the average of whole space depth is increasing due to the Extension, the number of volunteers is decreasing and rooms for geriatric care helpers are being created due to the geriatric care helper introduction duty. Also, there are solariums being created to improve the health of the aged and dispensaries are being placed on every floor with the increase of documentary work for geriatric care helpers. With the policy implementation, care facility space composition and structure are changing with facility standard and it was analyzed that facilities were mostly put under the control of limited number of people in care room and total ground area per person. It was also found that there is increase in care space integration through before and after comparison of whole integration value. This is considered as the important result not only in facility standard satisfaction, but also in care support of geriatric care helpers and the aged, its main users. Implication : In order for elderly care facilities to have quality improvement and to develop as suitable facilities for characteristics of the aged, independent environmental facility standard preparation of elderly care facilities is needed through mutual cooperation of construction fields with regulation and policy related researches.

• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.35-44
• /
• 2003

This study was conducted to develop proper model for cold storage facility that could of for uniform heat movement and air movement f3r green grocery and improve improper design of the existing container-type cold storage facility. For that reason, new model(dome-type) cold storage facility was developed using 3-D CFD(computational fluid dynamics) simulation. The size was 6m${\times}$6m${\times}$5m. Its size and configuration were same to simulation model. Unit cooler was designed to send cold air in 4 side ways. A dome-type cold storage facility showed uniform distributions of air temperature and velocity because cold air was forced to move down along the ceiling and the wall and then circulated to the unit cooler from the central part of the floor. Dome-type cold storage facility also showed by low wind velocity, below 1 m/s that could minimized cold damage and quality deterioration.

• Journal of Radiation Industry
• /
• v.17 no.4
• /
• pp.359-367
• /
• 2023

In this study, the function and purpose of the disposal cover, which is an engineering barrier installed to isolate the disposal vault of the near-surface disposal facility for radioactive waste from natural/man-made intrusion, and the design details of the demonstration facility for performance verification were described. The Demonstration facility was designed in a partially divided form to secure the efficiency of measurement while being the same as the actual size of the surface disposal facility to be built in the Intermediate & low-level radioactive waste disposal site of the Korea Radioactive Waste Agency (KORAD). The instruments used for measurement consist of a multi-point thermometer, FDR (Frequency Domain Reflectometry) sensor, inclinometer, acoustic sensor, flow meter, and meteorological observer. It is used as input data for the monitoring system. The 3D monitoring system was composed of 5 layers using the e-government standard framework, and was developed based on 4 components: screen, control module, service module, and DBIO(DataBase Input Output) module, and connected them to system operation. The monitoring system can provide real-time information on physical changes in the demonstration facility through the collection, analysis, storage, and visualization processes.

• Korean Management Science Review
• /
• v.11 no.3
• /
• pp.55-65
• /
• 1994

Given the flow matrix, plant size and department sizes, the algorithms in this paper provide the layout with rectilinear distance. To construct automated facility design, cut tree approach is employed. A branch and bound computer code developed by Tillinghast is modifided to find the feasible fits of departments without shape distortion in the plant rectangle.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.3
• /
• pp.49-57
• /
• 2013

This paper is to show the long-term roadmap by analyzing the development trend for the safety technology of facility disaster in the country and abroad, and it is designed to plan the long term and roadmap in response to change the disaster environment. Recently in the country, it is increasing the needs of the long term roadmap design of the facility disaster research development in the facility disaster, by the repidly of the social and the living and the related governments response's changing. The U.S. is going to develop the disaster responding research by planning the its master plans, including the NRF (National Responing Framwork), the NIMS (National Incident Management System), and its sinarios etc.. Japan is going to develop the research planning in the annual report of the disaster prevention, and we going to do the study projects about the facility disaster area with the NEMA (National Emergency Management Agency) and NDMI (National Disaster Management Institute). This paper is showed to design the long term roadmap of the facility disaster's study development, and to minimize the damage of the man and his property, and to set the study development system of the national facility disaster, and furthering to make the resilient planning in changing of the facility disaster's environment.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.395-400
• /
• 2004

This study consists of three steps of data modeling procedures. The first step is to identify possible items for the data model based on literature review and expert interviews. The second step is to design delineate possible sub-themes, feature classes, feature types, attributes, attribute domains, and their relationships. These are presented in various UML class diagrams, and each feature type is clearly defined and modeled. The data model also shows geometry objects and their topological relationships in UML diagrams. Finally, a standardized data model has been provided to avoid possible conflicts in the field of geographic and Facility Area, and thus this study and the data model will eventually assist in alleviating efforts to build standardized geographic information databases for Facility Area.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.10 no.1
• /
• pp.34-41
• /
• 2011

Global environment is getting deteriorated at an alarming rate. Eco-school could be one of the effective solutions to project our environment and a good sample of architecture to economize in total energies, resources and greenhouse gases. In case of our country, the study of eco-school planning is not sufficient compared with other countries, so this paper would be a good study on the indoor environment of the classroom by surveying their opinions and ideas from the group of users in school facility. The result of this study shows that the proper installation of building equipment and nature ventilation system is necessary to provide delightful environment for the students and to save the energy. To ensure that we have adequate saving and protection it is necessary to change the existing appraisal standard.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.95-98
• /
• 2006

Movement from aging society to aged society and to ultra aged society is a fact that we have to accept as reality. It also means that we are given a common assignment of supporting the aged. Therefore, this study dealt with forms of space of the welfare facilities for the aged in Japan that are being suggested as a plan to solve the problem of supporting the aged. Japan who has similar Confucian culture like Korea experienced the aging of population 30 years earlier and enactment of law 20 years earlier than Korea. Therefore, Korean policies, systems and standards for welfare of the aged have been following Japanese welfare development model. This study analyzed the small-scale multifunctional welfare facilities for the aged in Japan before founding them in Korea to adapt the facilities that are compatible in domestic circumstance.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.162-165
• /
• 1998

We consider a facility layout problem for optimized material flow system design in the automated production system design. Existing facility layout algorithm have a weak point that arranged facilities have irregular shape or don't preserve their own shape and size. The proposed algorithm give a layout which is minimize total material handling cost and maximize space utility under preserving each facilities' own shape and size.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.41-44
• /
• 2007

Ground test facility for the hypersonic propulsion system was designed, constructed and performance test was conducted. The design point was selected using quasi，1-Dimensional CFD analysis before the conceptual design for construction of hypersonic facility After that, specific designs for performance and components were completed using unit analysis CFD code and performance tests were conducted for the various operation conditions.