• The Journal of Sustainable Design and Educational Environment Research
• /
• v.18 no.3
• /
• pp.1-15
• /
• 2019

This study analyzes universities in Japan, which haves many similarities with those in Korea in certain aspects of the educational system and a common problem of reduced university admission resources, Korea's national university facility standards, policy related to nation-level university facility, and practical campus case. Through this, the study aims to examine the difference in the national approach and basic philosophy about university facilities in Korea and Japan, and also identify the major planning factors and improvement directions when establishing plans for university campuses in the future. The results of this study are as follows. First, Korea tends to promote policies related to university facilities by individual projects centered on a major pending problem or issue, while Japan has been shown to promote national university facility policies under a comprehensive mid-to-long-term plan by establishing a maintenance plan aimed at national university facilities every five years. Second, In the case of the university facility areas, the average university facility area of the examined universities in Japan is about 5.6% larger than the average university facility area in Korea. Additionally, the university facility area per student in Japan is about 13% wider than that of Korea. The total floor area of university facilities in Japan is also about 20.7% larger than that of Korea, and the university facility area per student in Japan is about 56.7% wider than that of Korea as well. Among support facilities, the total floor area of dormitories in Korea was 2.5 times wider than that of Japan, however, the acceptance rate of dormitory in Korea was 5.6% higher than Japan. Third, the university facility criteria items and systems of two countries are similar. but there are slight differences in the content such as the method of calculating student capacity, division classification, and the method of calculating the number of teachers.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.462-472
• /
• 2005

This study was carried out to suggest the plans for installation of rural sewage treatment facilities through the analysis of these facilities installed in Chungchongnam-do Province. About 5% of all installation was carried out by the department of wastewater and related environment problems and the other case was carried out by the department of construction or residence. In wastewater caused by 250 and 300 persons, facilities capacity do not exceed about $50m^3/d$, caused by 2,500 and 3,000 persons, $500m^3/d$. Advanced sewage treatment process were first needed in the discharge area where affected the water environment greatly. However, in carrying out the water quality pollutant of the total amount management system in the other areas, they should be driven only over the scale of pollutant quota object facilities standard. Rural sewage must be included in the special accounts according to the regulations of local government, and sewage treatment cost should be collected to manage. Installation type uses integrating joint treatment method in case the distance among villages is short or one treatment facility independently.

• Journal of Energy Engineering
• /
• v.22 no.1
• /
• pp.8-16
• /
• 2013

A core catcher is considered as a promising engineered system to stabilize the molten corium in the containment during a postulated severe accident in a nuclear power plant. Conceptually, the core catcher consists of a carbon steel body, sacrificial material, protection material, and engineered cooling channel. The cooling capacity of the engineered cooling channel should be guaranteed to remove the decay heat of the molten corium. The flow in ex-vessel core catcher is a combined problem of a two-phase flow in the engineered cooling channel and a single-phase natural circulation in the whole core catcher system. In this study, the analysis of the test facility for the core catcher using the CUPID code, which is a three-dimensional thermal-hydraulic code for the simulation of two-phase flows, was carried out to evaluate its cooling capacity.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.12-18
• /
• 2018

As of 2016, the cremation rates in the capital area are 91.2% in Incheon Metropolitan City, 87.5% in Seoul Special City, and 87.1% in Gyeonggi-do Province, of which Incheon has the highest rate, and cremation of general corpses through the online cremation reservation service of the funeral information system is continuously increasing every year. And as of 2017, the ratio of the cremation for those outside the jurisdiction (residents of other regions) among the users of public cremation establishment in Incheon, is about 32%. As the supply capacity is expected to reach the limit within several years due to the increase in demand for such a cremation facility, I would like to suggest a policy as follows. The expansion of cremation supply capacity by increasing the number of operations in the cremation furnace; The attractions of operating funds through contracts for joint use of the cremation facility with other local governments and investment funds for the expansion of cremation facilities; The plan for controlling the demand in cremation such as an increase in cremation charge for those outside the jurisdiction(residents of other regions), should be considered.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.585-590
• /
• 2005

It can be said that refrigeration and air-conditioning technology in Korea dates back to the ancient Shilla dynasty, all the way up to the Sokkuram(700s) and Seokbinggo(1700s). But modem refrigeration and air-conditioning technology was first developed in and introduced to Korea in the 1960s with the modernization of Korea. Today it is at a level which meets that of advanced countries in both the industrial and domestic fields. 62 million units of refrigeration and air-conditioning machinery and equipment were produced in 2003, worth a total of 7.7 trillion won(about 7.7 thousand million US$). As of 2003, there were about 700 companies that owned cold storage / freezing / refrigeration facilities, with cold storage capacity of about 2 million ton and capacity per company of about 3 thousand ton. This facilities most are continuously expanding and automatizing their facilities.

• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.801-806
• /
• 2007

The analytical hierarchy process (AHP) enables decision makers to represent the interaction of multiple factors in complex and unstructured situations. The process requires the decision maker to develop a hierarchical structure of the factors in the given problem and to provide judgments about the relative importance of each of these factors and ultimately to specify a preference for each decision alternative with respect to each factor. The research presented in this paper applies the AHP to identify key players in promoting port competitiveness. The literature survey revealed four major criteria and 15 sub-criteria. The four factors are cost, service quality, facility/capacity and economic-social variable. 150 questionnaires suitable for AHP analysis were made and 77 were returned. It is found that in terms of cost, the first key player is terminal operator and the second key player is shipping companies calling Busan port; in terms of service quality, the first key player is terminal operator, and the second key player is shipping companies calling Busan port; in terms of facility/capacity, the first key player is port authority and the second key player is terminal operator; in terms of economic-social variable, the first key player is terminal operator, and the second key player is shipping companies calling Busan port.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.44-51
• /
• 2019

Tunnel Boring Machine's Technology has depends mostly on imports, currently domestic technology development was proceeding. There are many technologies in this field, above all, the large-capacity motor drive technology required for excavation is one of the core technologies. In particular, when several large motors are simultaneously starting, there are many problems due to a large starting current at that time, and it is difficult to design and operate a power receiving facility. In this paper, A method of reducing the starting current by using the regenerative power generated by the deceleration of the motor has been studied. To verify this proposal, we designed the induction motor controller using CAE based power simulation tool and verified the results of the proposed method by applying the reduced model. As a result, it is possible to reduce the maximum starting current and shorten the start-up time. Moreover, even if several motors are connected to one bank, it is proved that the method can be efficiently operated by using the sequential braking / starting sequence. In the case of a power system in which a large capacity electric motor such as a tunnel excavation system is driven, the results of this study are expected to be a stable and effective method for solving the start-up current problem and designing the power receiving facility.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.135-141
• /
• 2016

This study aims to analyze the feasibility of installing a storage facility and make recommendations based on a cost-benefit analysis regarding the installation of a storage facility capable of preventing both floods and droughts. The capacity and installation costs are specified for the storage facility necessary to prevent floods, and a cost-benefit analysis is conducted by calculating the costs and benefits for each cost or benefit factor such as loss amounts, recovery costs, and drought prevention. The information can be used as the basic data for suggesting the feasibility of installing a multipurpose storage facility capable of preventing floods and droughts simultaneously. Also, this study expects to utilize its detailed results in a number of different ways including the prediction of loss amounts from natural disasters.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.353-358
• /
• 2009

For the successful development of 75 tonf class liquid rocket engine, a plenty of tests on each engine component has to be performed and this is equally true for a combustor. However the test facility which is in operation at Korea Aerospace Research Institute lacks its capacity to perform fire tests of a 75 tonf class combustor at its nominal thrust. Since the test facility has to be ready prior to the start of development tests, it is very urgent to establish the test facility. The preliminary design of a test facility for a 75 tonf class combustor which was performed according to the urgent necessity is described in the paper.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.440-448
• /
• 2009

Facility power-line electromagnetic interference (EMI) filters are used to provide radio frequency(RF) isolation between dedicated power distribution services and noise sensitive local power distribution systems. This type of EMI filters generally needs a high current capacity and, in some special applications, a high insertion loss of a minimum 100dB from 14kHz through 10GHz per MIL-STD 220 is required. This paper deals with an analysis and design of a wideband facility power-line EMI filter with the above requirements. The characteristics of the inductor and capacitor at high frequencies are investigated. The characteristics and design method of the facility EMI filter with a high order LC network are also presented. The prototype filter is finally implemented and its performance is verified from the experimental results.