• 한국도서관정보학회지
• /
• 제41권3호
• /
• pp.269-290
• /
• 2010

각각의 시소러스가 지닌 고유한 특성 및 상이한 구축목적으로 인해서, 하나의 시소러스를 이용하여 특정 도메인의 정보를 조직하고 검색하는데 여러 가지 문제가 나타나고 있다. 시소러스의 통합은 이러한 문제를 해결하기 위한 한 가지 방법이 될 수 있다. 본 연구에서는 물리학 분야에서 널리 사용되고 있는 시소러스인 PACS와 PIRA를 선정하여 이들 시소러스를 개념적으로 통합할 수 있는 패싯 프레임워크를 구축하였다. 이들 두 시소러스를 연결하기 위해 물리학 분야 전체를 다룰 수 있는 계층구조를 구축하였고, 이 계층구조에 패싯분석을 적용함으로써 각각의 주제 사이의 관계를 설정할 수 있는 하나의 지식기반을 제공하고 있다. 또한, 이 개념기반 패싯 프레임워크를 통해 보다 효율적으로 정보를 조직하고 검색할 수 있는 접근방법을 제안하고 있다.

• 정보관리연구
• /
• 제42권4호
• /
• pp.195-223
• /
• 2011

본 연구는 국내 179개 4년제 대학 전체를 대상으로 도서관 웹사이트 분석을 통하여 도서관 2.0 기반 서비스의 운영 현황과 실태를 비교분석하였다. 본 연구의 결과는 다음과 같다. 첫째, 대학도서관에서 도서관 2.0 기반 서비스로 가장 많이 제공하는 서비스의 형태는 (1) 이용자 서평, (2) RSS, (3) 태그, 태그 크라우드, (4) 모바일 앱, (5) Facet 기능, (6) Open API의 순이다. 둘째, 도서관 2.0 기반 서비스를 가장 많이 제공하는 도서관은 서울대학교 중앙도서관, 전주대학교 중앙도서관, 한국기술교육대학교 다산정보관의 순이며, 5개 이상 9개 이하로 제공하는 기관이 31개 기관, 4개 이하로 제공하는 기관이 145개 기관으로 나타났다. 셋째, 대학도서관의 도서관 2.0 기반 서비스는 9개 항목(이용자 서평, RSS, 모바일 앱, Facet 기능, 블로그, 트위터, 개인화서비스, 소장위치 문자전송, 페이스 북)에서 국공립대학교가 사립대학교보다 운영비율이 높았고, 나머지 6개 항목에서는 사립대학교가 국공립대학교보다 운영 비율이 높았다.

• Journal of Korean Neurosurgical Society
• /
• 제29권1호
• /
• pp.78-86
• /
• 2000

Objective : Lumbar spinal instability occurs when normal biomechanics support in lumbar vertebrae interrupted. Despite the recent enthusiastic studies, the precise radiological assessment has not been fully established, yet. Therefore, we carefully studied our cases to analyze the radiologic findings in lumbar spinal instability. Patients and Methods : We have put together radiological analysis and assessment based on 38 patients who have been diagnosed and treated for lumbar spinal instabilities from June 1994 to December 1998, Patients who have been diagnosed and treated for trauma were excluded from study. Results : The outcomes are as follows : 1) Lumbar lordotic curve was statistically significant in unstable group by 23.7, compared to the control group ($17.0^{\circ}$). 2) According to the resting x-ray, sagittal plane angulation measured on unstable group was $21.1^{\circ}$, control group $18.0^{\circ}$. Therefore unstable group was noticeably higher(p<0.01). 3) According to the resting x-ray sagittal plane displacement, unstable group had 4.3mm, the comparison had 1.2mm. Therefore measurement from the unstable group were significantly higher(p<0.01). 4) According to stress view, sagittal plane translation was 4.1mm for the unstables and 2.7mm for the comparisons. Therefore unstables were noticeably higher(p<0.01). 5) According to stress view, sagittal plane rotation was $15.1^{\circ}$ at L3-4, $22.0^{\circ}$ at L4-5, $27.9^{\circ}$ at L5S1 for the unstable group and $11.3^{\circ}$, $18.1^{\circ}$, $21.0^{\circ}$ each for the comparison. 6) Facet angle for unstable group, left $29.3^{\circ}-61.5^{\circ}$, right $24.4^{\circ}-63.2^{\circ}$ and the mean for each are $43.1^{\circ}$, $47.2^{\circ}$. The difference between left and right facet angle was $3.5^{\circ}-20.7^{\circ}$ and the mean value $15.3^{\circ}$. Facet angle for the comparisons for the left was $29.3^{\circ}-59.5^{\circ}$, right was in between $25.7^{\circ}-64.5^{\circ}$ range and the each mean are $44.9^{\circ}$ and $47.6^{\circ}$. Also, the difference between left and right facet angle was $4.1^{\circ}-9.3^{\circ}$ and the average was $17.1^{\circ}$. The average and the difference between the left and right angle are found not to have statistic necessity for both unstable and stable measurements(p>0.01). 7) 19 patients were found to have vacuum facet phenomenon among unstable group etc. results were collected. Conclusion : According to above results, we attempted to prepare the application to the patient of radiological analysis and assessment for lumbar spinal instability early checkup.

• 대한한의학회지
• /
• 제29권1호
• /
• pp.7-14
• /
• 2008

Purpose : The purpose of study was to develop generalized validity evaluation methods and terms for Sasang type diagnostic tests. Methods : A generalized statistical evaluation model for Sasang typology was suggested and generalized validity evaluation indices were proposed with this model. Results : The usefulness of validity evaluations, such as sensitivity and specificity values, were confirmed by the systematic review of the data from previously reported studies. Conclusion :Major obstacles in the multi-facet analysis and systematic review for Sasang type diagnostic tests were discussed with this test validity study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.167-168
• /
• 2007

Design Rule이 작아짐에 따라 Transistor performance 향상을 위한 여러 방안중 SEG 공정이 적용되고 있으며 이에 따른 Transistor 특성 연구 결과이다. SEG공정 적용시 SEG Profile에 따라 Transistor의 Short Channel Effect 열화가 발생하였고 그 원인은 Sidewall Facet발생으로 추정되며 이를 개선시 Tr 특성이 개선됨을 확인하였다.

• 한국비블리아학회지
• /
• 제23권1호
• /
• pp.47-63
• /
• 2012

본 연구에서는 조기표를 활용하여 차세대 도서관 목록(NGC)에서 강조하는 검색 결과의 패싯 내비게이션 기능을 개선하고자 하였다. 조기표는 자료의 형식적인 측면이나 내용 측면을 체계적으로 나타내므로, 기존의 NGC에서 제공하고 있는 주요 패싯인 언어나 발행년도, 주제(대구분)와 같이 효과적인 패싯이 될 수 있다. 이에 한국십진분류법(KDC)을 적용한 서지레코드의 분류기호를 분석하여, 본표와 조기표의 합성 현황과 특징을 도출하였다. 그리고 이를 바탕으로 본표에 합성된 조기성 기호가 패싯 내비게이션 기능 강화에 활용될 수 있음을 제안하였다. 이 방안은 분류기호를 부여하기 위해 기존에 이루어져 왔던 주제 분석 과정의 산물을 재사용할 수 있다는 추가적인 이점도 가지고 있다.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1523-1532
• /
• 1990

본 연구에서는 다면드릴을 연구 대상으로 하여 다면 드릴의 기하학적 형상인 자들을 이용하여 드릴 작업시 추력과 토크를 예측하는 데 적합한 절삭력 예측 모델을 유도하였으며, 추력과 토크를 최소화하는 방향으로 다면드릴의 각 형상인자를 최적화 하였다.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.122-129
• /
• 2007

To evaluate the effect of artificial disc implantation and fusion on the biomechanics of adjacent motion segment, a nonlinear three-dimensional finite element model of whole lumbar spine (L1-S1) was developed. Biomechanical analysis was performed for two different types of artificial disc, ProDisc and SB $Charit{\acute{e}}$ III model, inserted at L4-L5 level and these results were also compared with fusion case. Angular motion of vertebral body, forces on the spinal ligaments and facet joint under sagittal plane loading with a compressive preload of 150 N at a nonlinear three-dimensional finite element model of Ll-S1 were compared. The implant did not significantly alter the kinematics of the motion segment adjacent to the instrumented level. However, $Charit{\acute{e}}$ III model tend to decrease its motion on the adjacent levels, especially in extension motion. Contrast to motion and ligament force changes, facet contact forces were increased in the adjacent levels as well as implanted level for constrained instantaneous center of rotation model, i.e. ProDisc model.

• 제어로봇시스템학회논문지
• /
• 제8권3호
• /
• pp.208-219
• /
• 2002

A novel measurement method to obtain the 6-DOF motions of arbitrary rigid bodies is proposed in this paper. The method adopts a specially fabricated mirror called 3-facet mirror, which looks like a triangular pyramid haying an equilateral cross-sectional shape. The mirror is mounted on the objects to be measured, illuminated by a laser beam having circular profile, and reflects the laser beam in three different directions. Three PSDs(position sensitive detector) detect the three beams reflected by the mirror, respectively. From the signals of the PSDs, we can calculate the 3-dimensional position and orientation of the 3-facet mirror, and thus enabling us to determine the 3-dimensional position and orientation of the objects. In this paper, we model the relationship between the 3-dimensional position and orientation of an object in motion and the outputs of three PSDs. A series of experiments are performed to demonstrate the effectiveness and accuracy of the proposed method. The experimental results show that the proposed sensing system can be an effective means of obtaining 3-dimensional position and orientation of arbitrary objects and provide resonable measurement accuracy.

• 치과방사선
• /
• 제29권1호
• /
• pp.65-85
• /
• 1999

Objectives: To determine the effect of interpolation functions when processing the digital periapical images. Material and Methods: The digital images were obtained by Digora and CDR system on the dry skull and human subject. 3 oral radiologists evaluated the 3 portions of each processed image using 7 interpolation methods, and ROC curves were obtained by trapezoidal methods. Results: The heighest Az value(0.96) was obtained with cubic spline method and the lowest Az value(0.03) was obtained with facet model method in Digora system. The heighest Az value (0.79) was obtained with gray segment expansion method and the lowest Az value(0.07) was obtained with facet model method in CDR system. There was significant difference of Az value in original image between Digora and CDR system at a=0.05 level. There were significant differences of Az values between Digora and CDR images with cubic spline method, facet model method, linear interpolation method and non-linear interpolation method at α=0.1 level.