• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.641-647
• /
• 2009

The purpose of this study was to evaluate the physical properties and handle of knitwears made with silver yarns. The four different knitted fabrics were made and compared: cotton(C), cotton/silver(CS), polyester(P), and polyester/silver(PS). If fabrics knitted with silver combined yarns, their electrical shield properties, UV-cut properties, anti-static properties, and air permeability were improved. As an additional effect this also improves the antibacterial properties of fabrics. It was found that overall physical properties and functional properties were improved by using silver yarn with cotton. The silver knitted fabric was found to be improved its softness and fullness hand for apparel.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.608-615
• /
• 2018

The purpose of this study is to investigate the dyeability and functional properties of dyed fabric with the extract of Myrica rubra rind. For this purpose, the ultraviolet and visible spectra of the bark extracts were investigated. The dyeing temperature, dyeing time, mordant type, mordanting order, mordant concentration and dyeability were investigated. The color fastness based on washing, dry-cleaning, rubbing and light were evaluated by the types of Myrica rubra rind extract used. In addition, the deodorization and antibacterial activity were measured, and the functionality of the silk fabric dyed with the extract of the Myrica rubra rind was evaluated. The result shows that the color strength of the dye was excellent when the Myrica rubra rind was dyed at $80^{\circ}C$ for 80 minutes. The mordant dye color strength was high in the order of Fe mordant> Cu mordant> Al mordant. The dyeability of Al and Cu mordant was high during pre-mordanting compared to Fe mordant, and the dyeability of Fe mordant was high during post-mordanting than Cu and Al mordant. The deodorant property of the dyed fabric stained with the Myrica rubra rind extract was 92.4% and that of antibacterial property was 99.9% for Staphylococcus aureus and Klebsiella pneumoniae bacteria respectively.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.101-110
• /
• 2007

Since cotton fabrics with ripple finish treatment form wavy furrows on the surface or bumpy patterns, air circulation during wearing is good and the fabric is cool to the touch. The finishing principle is based on the mercerization, which utilizes the fact that cotton fibers contract in a concentrated NaOH solution. In this study, as fabric specimens, cotton fabrics with yarn counts of 40's, 60's and 80's were used. Concentrations of the NaOH solutions were 15%, 25%, and 35%. After dyeing fabrics using Rubia akane nakai, color and other properties were measured. As the concentration of the NaOH solution increased, the fabric became thicker and denser, and the number of occurrence of the prominence and depression per unit length became larger. The color of the region contracted by ripple finish became darker after dyeing, while the color of the untreated region became lighter, which enhanced the cubic effect of the ripple finish. As the count of the cotton yarn increased, the dyeability became better. As the concentration of the NaOH solution increased, the air permeability became lower.

• 한국의류산업학회지
• /
• 제9권1호
• /
• pp.96-102
• /
• 2007

Antibacterial finishing of nylon 66 fabrics was carried out with sericite and medilite which are a cheap price antibacterial agents and had excellent antibacterial effects. The particle size of sericite and medilite was 15 ${\mu}m$ and 30 ${\mu}m$. The antibacterial and deodorant ratio, tensile and tear strength, peel strength were examined to investigate the change of physical properties and antibacterial effect. The results are as follows. 1. Peel strength is increased with increasing adhesive content, and satisfied standard value of peel strength when adhesive content is 20 $g/m^2$. Also peel strength was decreased with increasing antibacterial agent content and particle size in the adhesives. 2. Tensile and tear strength were not related with antibacterial agent content in the adhesives. 3. Laundering nylon 66 fabric treated with antibacterial agent, the optimum content satisfying Korean Standard(KS) is 8%. The antibacterial and deodorant ratio were not affected by several types of adhesives.

• Composites Research
• /
• 제15권2호
• /
• pp.18-23
• /
• 2002

군사적 목적뿐만 아니라 상업적 목적에서도 레이더나 기타 전자파를 방출하는 기기들로부터 생성되는 전자파의 흡수 또는 차폐는 매우 중요한 일이다. 본 연구에서는 다른 유전적 성질을 가지는 복합재층을 배열하여 전자기파의 반사를 최소화하는 연구를 수행하였다. Glass fabric/epoxy에 전도성을 가지는 카본블랙 분체를 혼합한 복합재와 Carbon fabric/epoxy 복합재 대만 유전성질을 측정하였고, 이를 이용하여 X-band(8.2 GHz-l2.4GHz)에 대한 전자기파 반사의 최소화 구조를 구성하였다. 두께2.6mm의 다층 구조로 최대 30dB 이상의 반사 손실과 최대 흡수 주파수로부터 2GHz 주파수 대역에 걸쳐 10dB이상의 반사손실을 일으킬 수 있었다.

• 한국의류학회지
• /
• 제25권3호
• /
• pp.650-661
• /
• 2001

The purpose of this study is to suggest a guidance to select proper muslin through investigating fabric characteristics. The structural and physical properties of muslin and top fabric samples were tested by KES-FB system and other testers. And in order to examine the relation between fabric characteristics and the shape of garments, wearing tests were done with jackets made of those samples. As a result, bending rigidity(B), bending hysteresis(2HB), shear stiffness(G), shear hysteresis at=0.5(2HG), shear hysteresis at=5(2HG5), stiffness, cloth count/5cm, weight, thickness were extracted as the key factors affecting the appearance of garments. To have similar appearance, all of these should be counted. After standardizing, we calculate the variance between top cloth and muslin. And from this we could get the range that the proper muslin should be included. The ranges were as follows: Bending rigidity(B): within 0.024g.$\textrm{cm}^2$/cm(0.3$\sigma$); Shear stiffness(G): within 2.21g/cm.degree(1.3$\sigma$) Weight: within 9.33mg/$\textrm{cm}^2$(18$\sigma$); Thickness: within 0.20mm(1.8$\sigma$)

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.87-91
• /
• 2008

It is commonly known that water repellency of the fabric treated with fluorocarbon resin brings about a decrease by the washing and recovers by the subsequent heat treatment. In this article, effect of the water repellency was investigated on the nylon 6, triacetate and silk fabrics treated with hydrocarbon and silicon resins. Hydrocarbon and silicon resins have been widely used in the textile finishing as the softening and water proofing agents. The fabrics were treated with hydrocarbon resins, Paragium JQ and RC (Ohara Paragium Chemical Co.) and a silicon resin, Poron MR (Shinetsu Chemical Co.), and then washed and subsequently heat treated. Although the water repellency increased by the resin treatment, it decreased by the washing apparently and recovered a little by the heat treatment. The effect of the heat treatment was small comparing with that of the fluorocarbon resin. Furthermore, as a mechanical property of the treated fabric, KES shearing and bending hysteresis parameters, modulus and hysteresis width of the hydrocarbon resin-treated nylon 6, triacetate and silk fabrics decreased by the heat treatment after washing. Therefore, the treatment is effective at improving the softening of the fabric in water repellent finish.

• 패션비즈니스
• /
• 제9권3호
• /
• pp.114-124
• /
• 2005

Based on the previous study, three types at synthetic fibers comprising nylon, PET, and acrylic fibers were investigated in this study. The effect at mordanting on the air-permeability and dyeing properties at fabrics was investigated. The effect at rinsing process on the air-permeability and color was quantitatively investigated by rinsing the mordanted fabric specimens 1$\sim$3 times after mordanting. The air-permeability changed peculiarly according to the characteristics of the tiber materials after mordanting. The air-permeability values of nylon and acrylic fabric specimens dropped significantly after mordanting. On the other hand, those of PET fabric specimens hardly changed after mordanting. The metal ions absorbed on the fibers of nylon and acrylic fabrics did not show the mordanting effect. Regardless of mordanting, cochineal dyestuff made direct links with the molecular chains in nylon fabrics exhibiting dark colors. After dyeing acrylic fabrics, the color did not develop at all, even though partial components of the cochineal dyestuff were absorbed apparently.

• 패션비즈니스
• /
• 제13권1호
• /
• pp.82-90
• /
• 2009

This research was made to manufacture the fabric for interior uses by spinning a low melting mono 4 denier PET staple fiber with a soluble 1.4 denier fine PET fiber. The blended yarn has a thickness ranging from 10's to 14's, and the soluble PET fine fiber was dissolved to make a pore in the polymer. Thereby a snap property was decreased and a resilience property was improved to be suitable for a functional synthetic leather. In order to attain the optimum condition, a mechanical property according to fineness, and mixing ratio of low melting polymer, warp density, weft density and blending ratio, and a heat contraction ratio according to blending ratio were experimented. The warp density, 220 T/inch of fine denier PET and the weft density, 64 T/inch of thick denier PET were generated to 4/4 both twill weave fabric having constant tensile property and thickness.

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.20-29
• /
• 2005

Cotton fabric was treated with a reactive anionic agent in order to have anionic sites(-S03-) on it, which made it possible for the fabric to adsorb various cationic materials. In this study, the adsorptivity of various heavy metal ions such as Pb(II), Cd(II), Cr(III), Co(II), Cu(II), Ni (II) and Cr(VI) on the cotton fabrics treated with anionic agent was examined at the various conditions; concentrations of heavy metal ions, pHs of solution, reaction time and temperature. As a result, the adsorptivity of the heavy metal ions on the cotton fabrics treated with the anionic agent was highly increased comparing to that of untreated cotton fabrics. The order of the adsorptivity was as follows: $Pb(II)>Cd(II)>Cu(II)\geqNi(II)\geqCo(II)>Cr(III)\ggCr(VI)$. The adsorption amounts of most heavy metal ions were increased in weak alkaline conditions and were reached to an adsorption equilibrium within 10 ~ 30 minutes. The maximum adsorption ratios of Pb(II) and Cd(II) were respectively 99% and 80% of the initial concentration of heavy metal ions. Therefore the anionized cotton fabrics seem to be utilized as an adsorption fabrics for the removal of heavy metal ions in the waste water.