• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.4
• /
• pp.356-368
• /
• 2013

The Korea Aerospace Research Institute plans to launch a lunar module by 2025, and so is carrying out a preliminary study. Landing stability on the lunar surface is a key design factor of a lunar module. In this paper, a 1/6 scale model of a lunar module is investigated, for its landing stability on non-level surfaces. The lunar module has four tripod legs, with aluminum honeycomb shock absorbers in each leg strut. ADAMS$^{TM}$, the most widely used multi-body dynamics and motion analysis software, is used to simulate the module's lunar landing. Three types of dampers in the struts (rigid, viscous, and aluminum honeycomb dampers), and two types of lunar surfaces (rigid and elastic) are considered. The Sforce function is adopted, to model the aluminum honeycomb dampers. Details on the modeling and analysis of the landing stability of the 1/6 scale lunar module and the simulation results are provided in this paper.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.4
• /
• pp.219-227
• /
• 2021

Hydrogen isotopes, which are used as raw materials in fusion reaction, participate in the reaction only in small amount, and most of them are released together with impurities. In order to recover and reuse only hydrogen isotopes from this exhaust gas, a recovery process is required, and most of the hydrogen isotopes can be recovered using a Pd Membrane. In this study, the recovery rate of hydrogen isotopes was measured through the first and second stage Pd membrane experiments. In the case of the experiment using a single stage Pd membrane, about 99.2%, and in the case of the first stage and second stage Pd membrane connection experiments, a recovery rate of 99.9% or more was obtained. Therefore, the recovery rate of Pd membrane process applied to hydrogen can be applied to hydrogen isotopes. In addition, the simulation model was established using aspen custom modeler, a commercial software, and the validity of the simulation was checked by applying the references and experimental data. The simulation results based on the experimental data showed a difference of 2% or less.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.1
• /
• pp.63-71
• /
• 2017

Recently, there has been growing interest in public participation GIS (Geographic Information System) technology that enables spontaneous public response to increasingly frequent flood and drought events. Accordingly, social and economic demands are increasing on portal services that are designed to help cope with natural hazards such as earthquakes. By focusing on a specific hazard, urban flood, this study designed a prototype of a disaster response portal and its service system. The community map developed in this study is focused on prevention and mitigation of the urban flood damage by analyzing the vulnerable areas, and providing effective means to inspect the roads and sewer systems. By considering the compatibility with VGI (Volunteered Geographic Information) portals, the study created a system environment by employing universally used open-source software programs such as Apache Tomcat, GeoServer, GeoNetwork, and PostgreSQL/PostGIS.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.323-327
• /
• 2020

In this study, the neutronic calculation to obtain tritium breeding ratio (TBR) in a deuterium-tritium (D-T) fusion power reactor using Monte Carlo MCNPX is done. In addition, by using COMSOL software, an efficient cooling system is designed. In the proposed design, it is adequate to enrich up to 40% ⁶Li. Total tritium breeding ratio of 1.12 is achieved. The temperature of helium as coolant gas never exceed 687℃. As regards the tolerable temperature of beryllium (650℃), the design of blanket module is done in the way that beryllium temperature never exceed 600℃. The main feature of this design indicates the temperature of helium coolant is higher than other proposed models for blanket module, therefore power of electricity generation will increase.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.179-187
• /
• 2017

The fourth industrial revolution is a phenomenon where productivity is improved in each field by the convergence of IT technology and existing industries. In the dental treatment process, prosthetic treatment time is drastically shortened through AI and expert software. Oral imaging, prosthesis design, and prosthesis manufacturing are performed continuously, so the treatment can be completed in a few hours. In this paper, we introduce the research trend of multimedia technology in the prosthetic process. We also propose a new method for accelerating the fusion of surface data during the optical impression. Proposed method enables high-speed optical impression and accelerates the overall automated production process of dental prosthesis.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.407-407
• /
• 2002

The most widespread techniques for DEM generation are stereoscopy for optical sensor images and interfereometry for SAR images. These techniques suffer from certain sensor and processing limitations, which can be overcome by the synergetic use of both sensors and DEMs respectively. In this paper, different strategies for fusing SAR and optical data are combined to derive high quality DEM products. The filtering techniques, which take advantage of the complementary properties of SAR and stereo optical DEMs, will be applied for the fusion process. By taking advantage of the fact that errors of the DEMs are of different nature using the filtering technique, affected part are filtered and replaced by those of the counterpart and is tested with two sets of SPOT and ERS DEM, resulting in a remarkable improvement in DEM. for the analysis of results, the reference DEM is generated from digital base map(1:5000).

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1316-1318
• /
• 2003

The Bernstein polynomial is one of the classic algorithms of panoramic images mosaic for shading into process applying in Virtual Reality modeling. Nevertheless, it is proven that the algorithm has its own limitation and weakness in applications. This paper was given the improved algorithm using Sinusoidal function for image mosaic. In order to put the new algorithm into image processing software as a flexible and general tool, it was further developed an extension for graduation image fusion and multi-images mosaic.

• Journal of KIISE:Software and Applications
• /
• v.33 no.11
• /
• pp.915-922
• /
• 2006

Recently, the requirements of the embedded software are getting diverse as the diversity of embedded software application fields increases. The systematic development methods are issued to deal with the dependency between hardware and software. However, the existing development methods have not considered the software's close connection to hardware and the high-level reusability for common requirements of several similar domains. In this paper, we propose a design method of development process model of product lines to support an efficient development method for embedded software. For this, we firstly suggest a domain scoping method and an IDEF0(Integration DEFinition)-based business model for extracting the efficient requirements. Next, we present a component deriving method based on the service architecture and an architecture design method after considering the hardware dependency. And we explain the artifacts of MSDFS(Multi Sensor Data Fusion System) at each design step in order to show how the proposed model can be applied to the embedded software development.

• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.42-50
• /
• 2019

3D printing AM processes have advantages in complex shapes, customized fabrication and prototype development stage. However, due to various parameters based on both the machine and the material, the AM process can produce finished output after several trials and errors in the initial stage. As such, minimizing or optimizing negative factors for various parameters of the 3D printing AM process could be a solution to reduce the trial-and-error failures in the early stages of such an AM process. In addition, this can be largely solved through software simulation in the preprocessing process of 3D printing AM process. Therefore, the objective of this study was to investigate a simulation technology for the AM software, especially Ansys Inc. The metal 3D printing AM process, the AM process simulation software, and the AM process simulation processor were examined. Through this study, it will be helpful to understand 3D printing AM process and AM process simulation processor.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.3
• /
• pp.1-14
• /
• 2019

The 4th Industrial Revolution, intelligent automobile application technology is evolving beyond the limit of the mobile device to a variety of application software and multi-media collective technology with big data-based AI(artificial intelligence) technology. with the recent commercialization of 5G mobile communication service, artificial intelligent automobile technology, which is a fusion of automobile and IT technology, is evolving into more intelligent automobile service technology, and each multimedia platform service and application developed in such distributed environment is being developed Accordingly, application software technology developed with a single system SoC of a portable terminal device through various service technologies is absolutely required. In this paper, smart device design for ontology design of intelligent automobile open platform enables to design intelligent automobile middleware software design technology such as Android based SVC Codec and real time video and graphics processing that is not expressed in single ASIC application software technology as SoC based application designWe have experimented in smart device environment through researches, and newly designed service functions of various terminal devices provided as open platforms and application solutions in SoC environment and applied standardized interface analysis technique and proved this experiment.