References
- R. Andreani, et al., Fusion Eng. Des. 81 (1-7) (2006) 25-32. https://doi.org/10.1016/j.fusengdes.2005.09.005
- Y. Poitevin, The tritium breeding blankets for fusion reactors, 2011. Swiss Nuclear Forum, CRPP/Lausanne March-23.
- W. Meier, Assessment of Tritium Breeding Blankets from a Systems Perspective e Status Report, Department of Energy by Lawrence Livermore National Laboratory, 2014.
- W.Biel, Tritium Breeding and blanket technology, DPG school "the physics of ITER" Bad Honnef, 26.09.2014
- A.R. Raffray, et al., Breeding blanket concepts for fusion and materials requirements, J. Nucl. Mater. 307-311 (2002) 21-30. https://doi.org/10.1016/S0022-3115(02)01174-1
- Z. Xu, et al., Development of a DEMO helium cooled pebble bed (HCPB) breeder unit featured in flat plates with meandering channels, Wissenschaftliche Berichte (August 2006). FZKA-7181 ISSN 0947-8620.
- A. Ying, Status and perspective of the R&D on ceramic breeder materials for testing in ITER, J. Nucl. Mater. 367-370 (2007) 1281-1286. https://doi.org/10.1016/j.jnucmat.2007.03.240
- R. Lasser "Structural materials for DEMO: development, testing and modelling", 24th SOFT, 11-15 Sept 2006, Warsaw.
- D. Aquaro, et al., Adaptation of the HCPB DEMO TBM as breeding blanket for ITER: neutronic and thermal analyses, Fusion Eng. Des. 82 (2007) 2226-2232. https://doi.org/10.1016/j.fusengdes.2007.05.046
- P. Norajitra, et al., Conceptual design of the EU dual-coolant blanket (model C), in: 20th IEEE/NPSS Symposium on Fusion Engineering (SOFE). San Diego, CA, USA, 2003, p. 4.
- A.R. Raffray, et al., Ceramic breeder blanket for ARIES-CS, Fusion Sci. Technol. 47 (4) (2005) 1068-1073. https://doi.org/10.13182/fst05-a828
- N. Zandi, et al., Blanket simulation and tritium breeding ratio calculation for ITER reactor, J. Fusion Energy 34 (2015) 1365.
- H. Sadeghi, M. Habibi, Design and simulation of a blanket module for TOKAMAK reactors, Mod. Phys. Lett. A (2019), https://doi.org/10.1142/S0217732319501037.
- H. Sadeghi, et al., Laser Part. Beams (2017) 1-5, https://doi.org/10.1017/S0263034617000386.
- H. Sadeghi, et al., High efficiency focus neutron generator, Plasma Phys. Control. Fusion (2017), https://doi.org/10.1088/1361-6587/aa8be0.
- H. Sadeghi, et al., Simulation of dense plasma focus devices to produce N-13 efficiently, Laser Part. Beams (2019) 1-8.
- R. Amrollahi, et al., Alborz tokamak system engineering and design, Fusion Eng. Des. 141 (2019) 91-100. https://doi.org/10.1016/j.fusengdes.2019.02.111
- S. Fazelpour, et al., Design and simulation of NBI heating system using high dense helicon plasma source for Damavand Tokamak, Fusion Eng. Des. 137 (2018) 152-164. https://doi.org/10.1016/j.fusengdes.2018.09.006
- H. Sadeghi, M. Habibi, Designing a compact, portable and high efficiency reactor 33 (No. 1) (2019) 13, https://doi.org/10.1142/S0217732319502079, 1950207.
- T. Ihli, et al., Review of blanket designs for advanced fusion reactors, Fusion Eng. Des. 83 (2008) 912-919. https://doi.org/10.1016/j.fusengdes.2008.07.039
- D. Mcmorrow, Tritium, Internal Report, The MITRE Corporation, 2011.
Cited by
- The effects of side interactions on the neutronic analysis of HCCR breeding blanket vol.173, 2021, https://doi.org/10.1016/j.fusengdes.2021.112857