• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.351-352
• /
• 2002

In this paper, studies were made on the palm oil methyl ester (POME) added lubricants using FT-IR for monitoring oil degradation. In order to assess the degradation characteristics of POME added lubricant by FT-IR, static oxidation test was conducted using three different blended lubricants (viz, zero percent POME, five percent POME and ten percent POME with mineral-based oil) for 280 hrs. The oxidation temperature was set at $140^{\circ}C$. FT-IR quantitative data indicate an increased in oxidation products which was formed from 10% POME added lubricants after 280 hrs of oxidation test. The 5% POME added lubricant and mineral-based lubricant (without POME) showed less oxidation product after the test. From the FT-IR spectrum analysis of the oxidized oils it could be concluded that 5% POME can improve the performance of mineral-based oil by forming protective films.

• 한국석유지질학회지
• /
• 제14권1호
• /
• pp.45-52
• /
• 2008

천연가스로부터 청정연료인 합성유를 제조하는 GTL기술은 1920년대 군수의 목적으로 독일의 Fisher와 Tropsch에 의해서 석탄으로부터 합성유를 제조하는 기술의 필요에 의해 처음으로 개발되었다. 이후, 1960년대 인종차별로 인한 정치적 고립으로 석유수급이 어려웠던 남아프리카공화국의 수송용 연료의 필요에 의해 Sasol사에서 본격적으로 FT(Fisher-Tropsch) 합성기술을 상용화하기 시작했다. 최근까지도 저렴한 석유자원으로 인해 GTL기술이 원유 정제기술로부터 얻어지는 석유제품에 비해 경제성을 확보하지 못하여 본격적인 상업화가 지연되어 왔으나, 에너지 자원의 수급 및 기타 경제적, 환경적 변화로 인해 GTL사업에 대한 관심이 고조되고 있으며 보유 석유자원이 한계에 다다라 상대적으로 풍부한 천연가스의 석유화를 목표로 하고 있는 카타르를 중심으로 GTL플랜트 건설이 추진되고 있다. 천연가스를 원료로 석유제품(디젤 및 나프타, 윤활기유 등)을 만드는 GTL기술은 크게 3가지 공정으로 구분되는데, 천연가스에서 수소와 일산화탄소를 제조하는 합성가스 제조공정(Synthesis Gas Generation), 합성가스를 FT합성반응에 의해 고분자 선형탄화수소로 전환시키는 FT합성공정(FT Synthesis)과 FT합성유로부터 석유제품을 만드는 개질공정(Product Upgrading)으로 구성된다. 생산된 제품은 유황 및 질소화합물 등을 적게 함유하고 있고, 정유플랜트 연료보다 방향족성분이 적어, 연소 시 인체에 해로운 물질을 적게 생산하는 청정연료이며, 천연가스를 저온 액화하는 LNG사업에 비하여 운송이 용이하고 안정성이 높다는 장점을 가지고 있다.

• Mass Spectrometry Letters
• /
• 제2권2호
• /
• pp.41-44
• /
• 2011

Molecular compositions of two types of heavy oil were studied using positive atmospheric pressure photoionization (APPI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Vacuum gas oil (VGO) was generated from vacuum distillation of atmospheric residual oil (AR), and slurry oil (SLO) was generated from catalytic cracking of AR. These heavy oils have similar boiling point ranges in the range of 210-$650^{\circ}C$, but they showed different mass ranges and double-bond equivalent (DBE) distributions. Using DBE and carbon number distributions, aromatic ring distributions, and the extent of alkyl side chains were estimated. In addition to the main aromatic hydrocarbon compounds, those containing sulfur, nitrogen, and oxygen heteroatoms were identified using simple sample preparation and ultra-high mass resolution FT-ICR MS analysis. VGO is primarily composed of mono- and di-aromatic hydrocarbons as well as sulfur-containing hydrocarbons, whereas SLO contained mainly polyaromatic hydrocarbons and sulfur-containing hydrocarbons. Both heavy oils contain polyaromatic nitrogen components. SLO inludes shorter aromatic alkyl side chains than VGO. This study demonstrates that APPI FT-ICR MS is useful for molecular composition characterization of petroleum heavy oils obtained from different refining processes.

• 한국식품영양학회지
• /
• 제25권4호
• /
• pp.968-973
• /
• 2012

This study analyzes the structure types of salmon oil to evaluate the purity of salmon oil products based on the 38 different types of imported salmon oil products distributed in the Republic of Korea. The major types of omega-3 foods in the salmon oil are ethyl ester (EE) and triglyceride (TG). If the salmon oil contained potential contaminants and was processed in order to remove it, EE type omega-3 fatty acids are found in concentration. This provides a good guide in assessing if products were made with EE type ingredients or re-esterified contaminated materials. The results of the FT-IR analysis showed significant difference in the C=O, C-O band positions in TG and EE. There were 19 TG type products and 19 EE type products. The analysis of carbon isotope ratio was performed on the types of TG and EE. There were different properties in the 19 TG type products. In one product, the carbon isotope ratio was -25.15 and the other 18 products showed -22.15~-23.96. The carbon isotope ratio of all 19 EE type products showed -21.91~-23.74. The results of the TLC analysis showed similar results with FR-IR. The re-esterified TG form was not detected in the TG type products, confirming that the TG type products contained natural salmon oil. This study aimed to provide the basic material in classifying the types of natural salmon oil and re-esterified salmon oil, by analyzing the pattern and proportion of FT-IR spectrum, carbon isotope ratio, and TLC.

• Mass Spectrometry Letters
• /
• 제3권2호
• /
• pp.43-46
• /
• 2012

In this study, comprehensive two dimension gas chromatography (2D GC-MS) and 15 T Fourier transform ion cyclotron resonance mass spectrometry (15T FT-ICR MS) connected to atmospheric pressure photo ionization (APPI) have been combined to obtain detailed chemical composition of a diesel oil sample. With 2D GC-MS, compounds with aliphatic alkyl, saturated cyclic ring(s), and one aromatic ring structures were mainly identified. Sensitivity toward aromatic compounds with more than two aromatic rings was low with 2D GC-MS. In contrast, aromatic compounds containing up to four benzene rings were identified by APPI FT-ICR MS. Relatively smaller abundance of cyclic ring compounds were found but no aliphatic alkyl compounds were observed by APPI FT-ICR MS. The data presented in this study clearly shows that 2D GC-MS and 15T FT-ICR MS provides different aspect of an oil sample and hence they have to be considered as complementary techniques to each other for more complete understanding of oil samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.540-543
• /
• 1999

In order to determine what indluences the interfacial breakdown in EPDM/XLPE laminates. We studied the interfacial breakdown phenomena at several interfacial conditions. Breakdown strength in laminates pasted with silicone oil was higher than that with silicone grease. As a function of heat treatment time in a vacuum, interfacial breakdown strength increased much in XLPE/EPDM laminates pasted with silicone grease but increased a little in that with silcone oil. FT-IR spectrum of silicone oil was similar to that is silicone grease. FT-lR spectrum of silicone oil was not changed by the heat treatment in a vacuum, but in silicone grease another peak appeared.

• Mass Spectrometry Letters
• /
• 제3권3호
• /
• pp.63-67
• /
• 2012

The need of heavy and unconventional crude oil as an energy source is increasing day by day, so does the importance of petroleomics: the pursuit of detailed knowledge of heavy crude oil. Crude oil needs techniques with ultra-high resolving capabilities to resolve its complex characteristics. Therefore, ultra-high resolution mass spectrometry represented by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) has been successfully applied to the study of heavy and unconventional crude oils. The analysis of crude oil with high resolution mass spectrometry (FT-ICR MS) has pushed analysis to the limits of instrumental and methodological capabilities. Each high-resolution mass spectrum of crude oil may routinely contain over 50,000 peaks. To visualize and effectively study the large amount of data sets is not trivial. Therefore, data processing and visualization methods such as Kendrick mass defect and van Krevelen analyses and statistical analyses have played an important role. In this regard, it will not be an overstatement to say that the success of FT-ICR MS to the study of crude oil has been critically dependent on data processing methods. Therefore, this review offers introduction to peotroleomic data interpretation methods.

• Journal of Biosystems Engineering
• /
• 제41권3호
• /
• pp.208-220
• /
• 2016

Purpose: Fusel oil is a potent volatile aroma compound found in many alcoholic beverages. At low concentrations, it makes an essential contribution to the flavor and aroma of fermented alcoholic beverages, while at high concentrations, it induced an off-flavor and is thought to cause undesirable side effects. In this work, we introduce Fourier transform near-infrared (FT-NIR) spectroscopy as a rapid and nondestructive technique for the quantitative determination of fusel oil in the Korean alcoholic beverage "soju". Methods: FT-NIR transmittance spectra in the 1000-2500 nm region were collected for 120 soju samples with fusel oil concentrations ranging from 0 to 1400 ppm. The calibration and validation data sets were designed using data from 75 and 45 samples, respectively. The net analyte signal (NAS) was used as a preprocessing method before the application of the partial least-square regression (PLSR) and principal component regression (PCR) methods for predicting fusel oil concentration. A novel variable selection method was adopted to determine the most informative spectral variables to minimize the effect of nonmodeled interferences. Finally, the efficiency of the developed technique was evaluated with two different validation sets. Results: The results revealed that the NAS-PLSR model with selected variables ($R^2_{\upsilon}=0.95$, RMSEV = 100ppm) did not outperform the NAS-PCR model (($R^2_{\upsilon}=0.97$, RMSEV = 7 8.9ppm). In addition, the NAS-PCR shows a better recovery for validation set 2 and a lower relative error for validation set 3 than the NAS-PLSR model. Conclusion: The experimental results indicate that the proposed technique could be an alternative to conventional methods for the quantitative determination of fusel oil in alcoholic beverages and has the potential for use in in-line process control.

• 대한화학회지
• /
• 제44권4호
• /
• pp.337-342
• /
• 2000

현재 한전의 화력발전소에서 사용되는 실리콘 오일계 소포제의 품질관리를위해 각종 실험을 실시한 결과 제조업체별로 다른 계면활성제 (예를 들면 유화제와증점제)를 사용하고 있어 가가의 소포제는 특징적인 물성을 나타냄을 확인할 수 있었다. 보다 간편하면서도 정확한 소포제의 품질관리를 위해 고안된본 실험은 소포제에 사용된 계면활성제의 종류나 양에 관계없이 소포제에 함유된 실리콘 오일의 정확한 함량을 측정하고자 시도하였다. 우선 매우 간단한 실험 기구로 행할수 있은 중량법이나 원심분리법을 사용하여 실리콘 오일의 함량을 구한 다음, FT-IR에 의한 분광법을 사용하여 비교${\cdot}$확인하였다. 원심분리법은 바탕실험과 실제 소포제에 대해 적용한 결과, 소포제 내의 실리콘 오일의 전량 회수되지 않으므로 오일 함량의 분석에는 좋은 방법이 될 수 없음을 확인하였다. 한편 일부 회사에서 제조된 소포제의 경우 이들 방법 사리에 상당한 차이를 나타내었다. 비교실험 결과, FT-IR에 의한 분광법이 적은 시료의 양으로 짧은 시간내에 손쉽게 분석이 가능하고 좋은 재현상을 나타내므로, 언급한 전처리 방법과 함께 사용할 경우 첨가된 계면활성제의 종류와 양에 관계없이 좋은 결과를 얻을 수 있다고 판단된다.

• 보존과학회지
• /
• 제37권6호
• /
• pp.638-647
• /
• 2021

유기잔존물(organic residues)은 동물이나 식물에서 유래된 생체분자(biomolecule)의 일부분으로 최근 과학적 분석을 통해 옛사람들의 생활모습 복원에 중요한 정보를 제공하고 있다. 본 연구에서는 충주 금릉동 쇠저울유적에서 출토된 고려시대 청자 유병의 내부 유기물을 규명하고자 과학적 분석을 수행하였다. 적외선 분광기(FT-IR)와 기체 크로마토그래프-질량 분석기(GC-MS)를 이용하여 분석한 결과 유병 내 유기물은 식물에서 유래된 기름(oil)으로 확인되었다. 특히 GC-MS 분석 결과에서 다가 불포화 지방산과 식물성 스테롤이 검출되었고 참깨 종자에서 확인되는 세사민(sesamin) 성분이 검출되었다. 세사민은 리그난(lignan) 계열의 항산화물질로 참깨의 특성 성분이다. 따라서 고려시대 유병 내부에 담겨 있던 유기물은 참깨와 관련된 물질로, 참깨유가 보관되었던 것으로 추정되었다.