• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.5
• /
• pp.182-187
• /
• 2005

The FT-IR absorption spectrum by the lattice vibrations of ruby and garnet obtained from FT-IR shows quite different characteristics. By the UV-VIS spectroscopy it was found that the ruby has two transmission bands in red and blue region, while garnet has only one transmission band in red region. The color filter to distinguish ruby from garnet was developed and named HWANG JI HO filter. Through the HWANG JI HO filter, ruby was shown in blue color and garnet was shown in dark red color because of the only the blue region transmittance of the filter. Other red stones, such as spinel, tourmaline were shown in dark red color like as garnet. The ruby could be recognized easily from the red stone.

• Elastomers and Composites
• /
• v.42 no.3
• /
• pp.177-185
• /
• 2007

Polyamic acid(PAA)/organoclay nanocomposites containing phosphorous were prepared by solution blending of phosphorylated PAA(PPAA) and organically modified montmorillonite(O-MMT) as a type of layered clays. The nanocomposites were characterized by FT-IR, DSC, TGA, PCFC, SEM, and XRD. The preparation of nanocomposites was confirmed by FT-IR and XRD. SEM pictures showed that the organoclay was dispersed well in the PAA matrix relatively. XRD results indicated that the O-MMT layers were intercalated. The thermal stability and flame retardancy of O-MMT/PPAA nanocomposites were higher than those of pure PAA. PCFC results also showed that the heat release capacity and total heat release values of O-MMT 4 wt%/PPAA-0.2, 0.4, 0.6 composites were decreased with increasing the mole ratio of phosphorous. It was found that the nanocomposite films had the potential to be used as a fire safe material.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.51-58
• /
• 2020

In this study, the thermal oxidation of raw natural rubber (NR) was investigated under controlled conditions by optical image and fourier transform infrared (FT-IR) analysis. The thermal oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at 80℃ under low humidity conditions to completely exclude moisture and restrict light oxidation. Images of the thin film of raw NR were obtained before and after thermal oxidation. FT-IR absorption spectra were measured in the transmission mode at different thermal exposure times. The thermal oxidation of NR was examined by the changes in the absorption peaks at 3449, 1736, 1447, 1377, 1242, 1072, and 833 cm^-1, which corresponded to a hydroxyl group (-OH), a carbonyl group (-C=O) from an aldehyde and a ketone, a methylene group (-CH₂-), a methyl group (-CH₃), a carbon-oxygen single bond (-C-O) from an epoxide, a carbon-oxygen bond (-C-O) from an ether, an alcohol, a peroxide, or a cyclic peroxide, and a cis-methine group (cis-CCH₃=CH-), respectively. In the initial stage of thermal oxidation, two different types of free radicals were produced quickly and randomly by the homolytic cleavage of a double bond and allylic hydrogen abstraction. Aldehydes and ketones were formed from chain scissions of the double bonds and alcohols were produced from allylic hydrogen abstraction at the methylene or methyl groups. Two reactions seemed to proceed competitively with each other. At a later stage, oxidative crosslinks seemed to dominate through the combination of free radicals such as an allyl radical (CH=CHCH₂·), alkoxy radical (RO·), and peroxy radical (ROO·) and the reaction of a hydroperoxide (-ROOH) with a double bond. The image obtained after thermal oxidation showed hardening without cracks. Based on these observations, a plausible two-step mechanism was suggested for chain hardening caused by the thermal oxidation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.184-184
• /
• 1999

반도체소자의 고집적, 미세화에 따라 MOSFET 소자에서의 고농도, 미세접합이 요구되고 있다. 이러한 고농도, 미세접합을 형성하기 위하여 기존의 저에너지 이온주입법을 대체 또는 병행할 목적으로 플라즈마 이온주입방법이 활발히 연구되고 있다. 본 연구에서는 플라즈마 이온주입방법을 이용하여 (100) 실리콘 기판에 보론을 주입후 열처리하여 형성된 p+층의 도펀트의 활성화와 이온주입으로 인한 실리콘 기판의 손상을 고찰하였다. 본 실험에서 (100)실리콘 기판에 도핑할 소스 가스로 BF3을 주입하고, D.C. pulse 플라즈마 도핑시스템을 사용하여 플라즈마 내의 보론이온을 웨이퍼 홀더에 -1~-5kV의 인가된 음전압에 의해 가속시키어 실리콘 웨이퍼에 주입하였다. 주입에너지 -1kV, -3kV, -5kV와 1$\times$1015, 3$\times$1515의 dose로 주입된 실리콘 기판을 급속가열방식(RTP)을 사용하여 $600^{\circ}C$~110$0^{\circ}C$의 온도구간에서 10초와 30초로 열처리하여 도펀트의 활성화와 미세접합을 형성한 후 SIMS, four-point probe, Hall 측정, 그리고 FT-IR을 이용하여 플라즈마 이온주입된 도펀트의 거동과 활성화율을 관찰하였고 FT-IR과 TEM의 분석을 통하여 이온주입으로 인한 실리콘 기판의 손상을 고찰하였다. SIMS, four-point probe, Hall 측정, 그리고 FT-IR의 분석으로 열처리 온도의 증가에 따라 도펀트의 활성화율이 증가하였고, 이온주입 에너지와 dose 그리고 열처리 시간의 증가에 따라서 주입된 도펀트의 활성화는 증가하였다. 그리고 주입에너지와 dose 그리고 열처리 시간의 증가에 따라서 주입된 도펀트의 활성화는 증가하였다. 그리고 주입에너지와 dose를 증가시키면 접합깊이가 증가함을 관찰하였다. 이온주입으로 인한 기판손상의 분석을 광학적 방법인 FT-IR과 미세구조를 분석할 수 있는 TEM을 이용하여 분석하였다. 이온주입으로 인한 dislocation이나 EOR(End Of Range)과 같은 extended defect가 없었고, 이온주입으로 인한 비정질층도 없는 p+층을 얻을수 있었다.

• Journal of Adhesion and Interface
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2014

Ion exchange membrane is widely used in various fields such as electro dialysis, diffusion dialysis, redox flow battery, fuel cell. PVC cation exchange membrane using ultrasonic modification was prepared by sulfonation reaction in various sulfonation times. Sulfuric acid was used as a sulfonating agent with ultrasonic condition. We've characterized basic structure of sulfonated PVC cation exchange membrane by FT-IR, EDX, water uptake, ion exchange capacity (IEC), electrical resistance (ER), conductivity, ion transport number and surface morphology (SEM). The presence of sulfonic groups in the sulfonated PVC cation exchange membrane was confirmed by FT-IR. The maximum values of water uptake, IEC, electrical resistance and ion transport number were 40.2%, 0.87 meq/g, $35.2{\Omega}{\cdot}cm^2$ and 0.88, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.2
• /
• pp.116-124
• /
• 2001

To improve the functional properties as a food, silk fibroin was phosphorylated with STMP In the phosphorylation reaction of silk fibroin, the degree of phosphorylation was increased with high alkali index and treatment temperature. Depending on treatment time and concentration of STMP it was rapidly increased up to 1hr. and 50%, but slowly above that time and 100%. It was indicated in the results of FT-IR analysis and $\^$31/p NMR spectroscopy of phosphorylated fibroin that it had a close ∝-helix and poly-phosphate structure. The more phosphorylation of fibroin made more turbidity, foam expansion and foam stability, but less solubility. Emulsifying activity was increased up to P100, but slightly decreased above Pl00 and emulsifying stability was constantly increased on the progressing of phosphorylation.

• Elastomers and Composites
• /
• v.54 no.2
• /
• pp.110-117
• /
• 2019

The characterization of the ozone oxidation for raw natural rubber (NR) was investigated under controlled conditions through image and fourier transform infrared (FT-IR) analysis. The ozone oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at $40^{\circ}C$ under low humidity conditions to completely exclude thermal, moisture, or light oxidation. The ozone concentration was set at 40 parts per hundred million (pphm). Before or after exposure to ozone, the image of the thin film for raw NR was observed at a right or tilted angle. FT-IR absorption spectra were measured in the transmission mode according to ozone exposure time. The ozone oxidation of NR was determined by the changes in the absorption peaks at 1736, 1715, 1697, and $833cm^{-1}$, which were assigned to an aldehyde group (-CHO), a ketone group (-COR), an inter-hydrogen bond between carbonyl group (-C=O) from an aldehyde or a ketone and an amide group (-CONH-) of protein, and a cis-methine group ($is-CCH_3=CH-$, respectively. During ozone exposure period, the results indicated that the formation of the carbonyl group of aldehyde or ketone was directly related to the decrement of the double bond of cis-1,4-polyisoprene. Only carbonyl compounds such as aldehydes or ketones seemed to be formed through chain scission by ozone. Long thin cracks with one orientation at regular intervals, which resulted in consecutive chain scission, were observed by image analysis. Therefore, one possible two-step mechanism for the formation of aldehyde and ketone was suggested.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.67-81
• /
• 2021

This study aimed to conduct tree-ring dating and analysis of the materials used for the wooden coffins excavated from the ruins of Sipjeong-dong, Incheon. The tree species for the 10 wooden coffin materials was identified as pine. For accurate tree-ring measurement, the cross section was polished using sandpaper. The annual ring width was measured with an accuracy of 0.01 mm. Since the five materials were consistent with each other in dendrochronology, a representative annual ring chronology of 83 years was prepared. The prepared representative annual ring chronology was compared with the standard annual ring chronology, and the outermost ring of the wooden coffin was confirmed to correspond to the year 1575, suggesting that the wooden coffin was produced in the late 16th century. In addition, microscopic observation and FT-IR analysis revealed that the fibers attached to the surface of the wooden coffin were fibroin (Silk), and infrared spectroscopy (FT-IR) and Py-GC/MS analysis showed that the paint left on the surface of the wooden coffin was lacquer.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.9
• /
• pp.63-69
• /
• 2011

The objective of this study is to investigate the change of physicochemical properties of humic acid, surfactants and water by pulsed electric field treatment. Critical micelle concentration(CMC) of surfactants and physicochemical properties of water were determined by the conductivity measurement, FT-IR and NMR, respectively. In electric field processing, structural changes of C-N complex and C=O were founded by FT-IR analysis. The increase of Hertz wave was in the range of 2.3 to 9.9 Hz in NMR analysis. CMC of cation and anion surfactant decreased to 1.3% and 9.2%, respectively, while the value of UV-vis increased. UV-vis of humic acid decreased by pulsed electric field. Therefore, application of pulsed electric field systeme was directly indicated to influence the physicochemical properties of water and organic compounds.

• Journal of Plant Biotechnology
• /
• v.42 no.1
• /
• pp.60-70
• /
• 2015

The aim of this study was to investigate whether fourier transform infrared (FT-IR) spectroscopy can be applied to simultaneous determination of fatty acids contents in different soybean cultivars. Total 153 lines of soybean (Glycine max Merrill) were examined by FT-IR spectroscopy. Quantification of fatty acids from the soybean lines was confirmed by quantitative gas chromatography (GC) analysis. The quantitative spectral variation among different soybean lines was observed in the amide bond region ($1,700{\sim}1,500cm^{-1}$), phosphodiester groups ($1,500{\sim}1,300cm^{-1}$) and sugar region ($1,200{\sim}1,000cm^{-1}$) of FT-IR spectra. The quantitative prediction modeling of 5 individual fatty acids contents (palmitic acid, stearic acid, oleic acid, linoleic acid, linolenic acid) from soybean lines were established using partial least square regression algorithm from FT-IR spectra. In cross validation, there were high correlations ($R^2{\geq}0.97$) between predicted content of 5 individual fatty acids by PLS regression modeling from FT-IR spectra and measured content by GC. In external validation, palmitic acid ($R^2=0.8002$), oleic acid ($R^2=0.8909$) and linoleic acid ($R^2=0.815$) were predicted with good accuracy, while prediction for stearic acid ($R^2=0.4598$), linolenic acid ($R^2=0.6868$) had relatively lower accuracy. These results clearly show that FT-IR spectra combined with multivariate analysis can be used to accurately predict fatty acids contents in soybean lines. Therefore, we suggest that the PLS prediction system for fatty acid contents using FT-IR analysis could be applied as a rapid and high throughput screening tool for the breeding for modified Fatty acid composition in soybean and contribute to accelerating the conventional breeding.