• 대한조선학회논문집
• /
• 제40권5호
• /
• pp.53-59
• /
• 2003

Ocean space utilization using VLFS(Very Large Floating Structures) can provide environmental impact free space by allowing sea water flow freely through the floating structure. Use of Pontoon type VLFS for that purpose needs employment of breakwaters for reduction of wave effects. Therefore, in order to maximize advantage of environmental impact free structure, the breakwater should be the one that can allow water flow freely through it, too. In this paper hydroelastic response of a pontoon type structure is analyzed considering breakwaters which allow water flow through its opening at bottom of the breakwaters. Mode superposition technique is used for solving equation of flexible body while interactions between the pontoon and breakwaters is considered based on generalized mode concept. Bi-quadratic nine node higher-order boundary element method is adopted for more accurate numerical treatment near sharp edged body shape. Performance of various combinations of breakwaters is investigated.

• 한국멀티미디어학회논문지
• /
• 제15권10호
• /
• pp.1212-1220
• /
• 2012

In this paper, a collision-free resource reservation scheme for WUSB (Wireless Universal Serial Bus) networks with WiMedia D-MAC (Distributed Medium Access Control). Since distributed characteristic of the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme may cause lots of conflicts, overall performances of the WUSB with WiMedia D-MAC can be deteriorated. In addition, when we consider multi-hop environment, "mobile" hidden node problem due to mobility of WUSB devices can be happened, and it is a critical problem to mobile WUSB devices transceiving real-time QoS (Quality of Service) traffic. To tackle the problem, we propose a new DRP reservation mechanism to prevent DRP conflicts for multi-hop mobility support in WUSB networks with WiMedia D-MAC and show its improved performance via simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.720-725
• /
• 1991

This paper is concerned with the program of the automatic mesh generation for 2-dimensional domain which contains the curved boundaries and holes. This program treats a new vertical - line drawing method. This method starts with 4-subdivisions of problem domain and the classification of the cross points of grid lines and boundaries. And the new node is generated by the vertical line to the line connecting the two intersections of a boundary and two grid lines in general. The boundaries are piecewise-curves composed of lines, circles, arcs, and free curves. The free curves are generated by B-Spline form. Although there were some bad elements for the complex boundary, it was possible to obtain the acceptable elements for the given boundaries. The results of automatic mesh generation can be verified directly by drawing on the computer monitor in executing the program. And it is possible to add the processes - that is, editing, hard copying, etc - using the script file in Auto-CAD.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.220-225
• /
• 2007

This paper is a continuation of the recent development on the hermite-based divergence free basis function and deals with a non-isothermal fluid flow thru the buoyancy driven flow in a square cavity with temperature difference across the two sides. The basis functions for the velocities consist of the hermite function and its curl. However, the basis for the temperature are the hermite function and its gradienst. Hence, the number of degrees of freedom at a node becomes 6, which are the stream function, two velocities, the temperature and its x- and y-derivatives. Numerical results for the streamlines, the temperatures, the x-velocities and the y-velocities show good agreements with those of De vahl Davis[7].

• Journal of Chest Surgery
• /
• 제27권3호
• /
• pp.230-233
• /
• 1994

A 21-year-old man with atrioventricular[AV] reentry tachycardia secondary to concealed accessory AV connection underwent surgical division of two accessory pathways following failure of radiofrequency catheter ablation. pathways were located in the left free wall area.Before cardiopulmonary bypass, the epicardial mapping confirmed the existence and localization of two accessory pathways. The patient was approached through a left atriotomy with a dissection of the left free wall area beginning with an internal mapping was carried out after separation from cardiopulmonary bypass to confirm the absence of retrograde conduction of accessory pathway. Five weeks after surgery, the electrophysiololgic study demonstrated no retrograde conduction through two accessory pathways.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.452-459
• /
• 1999

In this study, error estimates using the stress projecting scheme and adaptive nodal generation procedure in the element-free Galerkin(EFG) method are proposed. The essence of proposed error estimates is to use the difference between the values of the projected stress and these given directly by the EFG solution. The stress projection can be obtained simply by taking product of shape function based on a different domain of influence with the stresses at nodes. An adaptive procedure based on error estimates is discussed in this paper. By use of background integration cell, adding node scheme at high error norm area is proposed. To demonstrate the performance of proposed scheme, the convergence behavior is investigated for several examples

• Steel and Composite Structures
• /
• 제12권4호
• /
• pp.275-289
• /
• 2012

In this paper the influence of stiffener location, rise/span ratio and fibre orientation on vibration behavior of corner supported hypar shells is studied by using a four-node hybrid stress finite element. The formulation of the element is based on Hellinger-Reissner variational principle. The element is developed by combining a hybrid plane stress element and a hybrid plate element. Benchmark problems are solved to validate the approach and free vibration response of stiffened orthotropic hypar shells is studied both with respect to fundamental frequency and mode shapes by varying the location of stiffeners, rise/span ratio and fiber orientation.

• Archives of Plastic Surgery
• /
• 제32권5호
• /
• pp.641-644
• /
• 2005

Cutaneous squamous cell carcinoma has a high incidence. However, regional metastasis occurs infrequently because skin cancer is usually recognized and treated early. We report the case of squamous cell carcinoma around the earlobe in a 74-year-old male patient. The cutaneous squamous cell carcinoma invaded ipsilateral parotid gland directly without lymphatic spreading. Wide excision was made with 1.5 cm margin and immediate reconstruction was performed with radial forearm fasciocutaneous free flap. During operation facial nerve was preserved. No recurrence was noted for 5 years and the patient was satisfied with good aesthetic result. Cutaneous squamous cell carcinoma spreads to the parotid gland usually through lymph nodes and there are few reports of invasive organ damage by direct invasion. We experienced a case of direct invasion to parotid gland without lymph node involvement of cutaneous squamous cell carcinoma and treated the cancer adequately with wide excision and free flap coverage.

• Steel and Composite Structures
• /
• 제6권3호
• /
• pp.221-236
• /
• 2006

The objective of this work is to describe the main steps involved in the derivation of a GBT (Generalised Beam Theory) formulation to analyse the vibration behaviour of loaded cold-formed steel members and also to illustrate the application and capabilities of this formulation. In particular, the paper presents and discusses the results of a detailed investigation about the local and global free vibration behaviour of lipped channel simply supported columns. After reporting some relevant earlier GBT-based results dealing with the buckling and vibration behaviours of columns and load-free members, the paper addresses mostly issues concerning the variation of the column fundamental frequency and vibration mode nature/shape with its length and axial compression level. For validation purposes, some GBT-based results are also compared with values obtained by means of 4-node shell finite element analyses performed in the code ABAQUS.

• Advances in aircraft and spacecraft science
• /
• 제9권6호
• /
• pp.507-523
• /
• 2022

This study is aimed to accurately predict the vibration response of two types of functionally graded sandwich plates, one with FGM core and another with FGM face sheets. The gradation in FGM layer is quantified by exponential method. An efficient zig-zag theory is used and the zigzag impacts are established via a linear unit Heaviside step function. The present theory fulfills interlaminar transverse stress continuity at the interface and zero condition at the top and bottom surfaces of the plate for transverse shear stresses. Nine-noded C-0 FE having 8DOF/node is utilized throughout analysis. The present model is free from the obligation of any penalty function or post-processing technique and hence is computationally efficient. Numerical results have been presented on the free vibration behavior of sandwich FGM for different end conditions, lamination schemes and layer orientations. The applicability of present model is confirmed by comparing with published results. Several new results are also specified, which will serve as the benchmark for future studies.