• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.369-370
• /
• 2013

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.727-730
• /
• 2002

최근 키를 가지고 다니는 불편함과 보안성을 고려한 전자 키들이 많이 생산되고 있다. 키의 불편함과 보안성을 보완하는 방법에는 비밀번호 입력, 지문인식, 홍체인식 등의 방법이 이용되고 있는데, 본 논문에서는 비밀번호를 입력하는 방법으로 설계하였다. Altera사의 Software인 MAXPLUS II를 이용하여 설계하였고, Hardware Language인 VHDL을 이용하였다.

• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.141-146
• /
• 2007

In this paper, we proposed an efficient FPGA-based simulation acceleration method based on FPGA compilation avoidance, which can effectively decrease the long debugging turnaround time incurred from the every debugging process in the functional verification. The proposed method had been experimentally applied to the functional verification for a microcontroller design. It had clearly shown that the debugging turnaround time was greatly reduced while the high simulation speed of the simulation acceleration was still maintained.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.675-687
• /
• 2017

In the aerospace industry, we have produced various models according to operational conditions and the environment after development of the base model is completed. Therefore, when design change is necessary, there are modification and updating costs of the circuit whenever environment variables change. For these reasons, recently, in various fields, system designs that can flexibly respond to changing environmental conditions using field programmable gate arrays (FPGAs) are attracting attention, and the rapidly changing aerospace industry also uses FPGAs to organize the system environment. In this paper, we design the controller area network (CAN) intellectual property (IP) protocol used instead of the avionics protocol that includes ARINC-429 and MIL-STD-1553, which are not suitable for small unmanned aerial vehicle (UAV) systems at the register transistor logic (RTL) level, which does not depend on the FPGA vender, and we verify the performance. Consequentially, a Spartan 6 FPGA model-based system on chip (SoC) including an embedded system is constructed by using the designed CAN communications IP and Xilinx Microblaze, and the configured SoC only recorded an average 32% logic element usage rate in the Spartan 6 FPGA model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.558-559
• /
• 2018

The harness wiring serves as an intermediary for transmitting the electrical signals necessary to drive the vehicle and is highly influenced by vehicle performance. Wire harness tester performs assembly test. Harness products are operated with the function of checking 0 and 1. Proceed to inspection in wire assembly process. There is a defect in the finished vehicle during use. We want to improve such defects. We design the FPGA and propose the measurement device design and the simulation result that the line and the line are disconnected by ADC precision harness inspection.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.169-175
• /
• 2014

NG-SDH system is connected with networks throughout optical fibers. Network synchronization controller is a necessary for the data synchronization in each optical transmission system. In this paper, we have design and implementation the network synchronization controller using SOPC(system on a programmable chip) design technic. For this network synchronization controller we use FPGA in Altera. FPGA includes 32bit CPU, DPRAM(dual port ram), digital input/output port, transmitter and receiver framer, phase difference detector. We also confirm that designed network synchronization controller satisfies the ITU-T G.813 timing requirements.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.4
• /
• pp.339-345
• /
• 2007

This paper presents a design of an FPGA (Field Programmable Gate Array) -based currentcontroller. Using the nature of the high computational capability of FPGA, the digital delay due to the algorithm execution can be reduced. The control performance can be better than the conventional DSP (Digital Signal Processor)-based current controller. Moreover, this method does not need any delay compensation algorithm because the digital delay is physically diminished. Therefore, the bandwidth of the current controller can be extended by this method. The feasibility of this method is verified by several experimental results under the various conditions.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.10-17
• /
• 2015

In this Paper, an efficient method of FPGA based design and implementation of Sobel Edge detector block using 3-Line buffers is presented. The FPGA provides the proper and sufficient hardware for image processing algorithms with flexibility to support Sobel edge detection algorithm. A pipe-lined method is used to implement the edge detector. The proposed Sobel edge detection operator is an model using of Finite State Machine(FSM) which executes a matrix mask operation to determine the level of edge intensity through different of pixels on an image. This approach is useful to improve the system performance by taking advantage of efficient look up tables, flip-flop resources on target device. The proposed Sobel detector using 3-line buffers is synthesized with Xilinx ISE 14.2 and implemented on Virtex II xc2vp-30-7-FF896 FPGA device. Using matlab, we show better PSNR performance of proposed design in terms of 3-Line buffers utilization.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.2
• /
• pp.1-12
• /
• 2013

Information Security System is implemented in software, hardware and FPGA device. Implementation of S/W provides high flexibility about various information security algorithm, but it has very vulnerable aspect of speed, power, safety, and performing ASIC is really excellent aspect of speed and power but don't support various security platform because of feature's realization. To improve conflict of these problems, implementation of recent FPGA device is really performed. The goal of this thesis is to design and develop a FPGA hardware accelerator for information security system. It performs as AES, SHA-256 and ECC and is controlled by the Integrated Interface. Furthermore, since the proposed Security Information System can satisfy various requirements and some constraints, it can be applied to numerous information security applications from low-cost applications and high-speed communication systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.758-761
• /
• 2004

This paper proposes a design and implementation of multiplierless digital PID (Proportional-Integral-Derivative) controller using FPGA (Field Programmable Gate Array) for controlling the speed of DC motor in digital system. The multiplierless PID structure is based on Distributed Arithmetic (DA). The DA is an efficient way to compute an inner product using partial products, each can be obtained by using look-up table. The PID controller is designed using MATLAB program to generate a set of coefficients associated with a desired controller characteristics. The controller coefficients are then included in VHDL (Very high speed integrated circuit Hardware Description Language) that implements the PID controller onto FPGA. MATLAB program is used to activate the PID controller, calculate and plot the time response of the control system. In addition, the hardware implementation uses VHDL and synthesis using FLEX10K Altera FPGA as target technology and use MAX+plusII program for overall development. Results in design are shown the speed performance and used area of FPGA. Finally, the experimental results can be shown when compared with the simulation results from MATLAB.