• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.634-643
• /
• 2021

In this paper, an FPGA-based acceleration scheme of range Doppler algorithm (RDA) is proposed for the real time synthetic aperture radar (SAR) imaging. Hardware architectures of matched filter based on systolic array architecture and a high speed sinc interpolator to compensate range cell migration (RCM) are presented. In addition, the proposed hardware was implemented and accelerated on Xilinx Alveo FPGA. Experimental results for 4096×4096-size SAR imaging showed that FPGA-based implementation achieves 2 times acceleration compared to GPU-based design. It was also confirmed the proposed design can be implemented with 60,247 CLB LUTs, 103,728 CLB registers, 20 block RAM tiles and 592 DPSs at the operating frequency of 312 MHz.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.101-104
• /
• 2005

본 논문에서는 국내에서 채택한 ATSC-DTV (Advanced Television System Committee-Digital Television)의 단일주파 수망 (SFN; Single Frequency Network) 구성을 위한 TxID (Transmitter Identification)용 ZCD (Zero Correlation Duration)확산코드 기반의 부분상관 정합필터를 새롭게 제안하였다. 본 논문에서 제안한 정합필터의 구현 알고리즘은 TxID에 있어서 기존의 정합필터 구조를 적용할 경우에 발생되는 소비전력 문제나 하드웨어 구현의 어려움을 획기적으로 해결할 수 있다는 잇점을 갖는다. 따라서 본 논문에서는 이러한 다양한 잇점을 갖는 새롭게 제안한 ZCD용 부분상관 정합필터를 FPGA (Field Programmable Gate Array)를 이용한 디지털 하드웨어로 구현하고 그 성능을 분석함으로써 유용성을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1171-1177
• /
• 2002

In this paper, we proposed a high speed IP(Internet Protocol) packet forwarding engine of ATM(Asynchronous Transfer Mode) based label edge routers for POS(Packet over SONET) interface. The forwarding engine uses TCAM(Ternary Content Addressable Memory) for high performance lookup processing of the packet received from POS interface. We have accomplished high speed IP packet forwarding in hardware by implementing the functions of high speed IP header Processing and lookup control into FPGA(Field Programmable Gate Array). The proposed forwarding engine has the functions of label edge routers as the lookup controller supports MPLS(Multiprotocol Label Switching) packet processing functionality.

• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.368-377
• /
• 2011

This paper explains the hardware structure of SURF(Speeded Up Robust Feature) based feature point extractor and its FPGA verification result. SURF algorithm produces novel scale- and rotation-invariant feature point and descriptor which can be used for object recognition, creation of panorama image, 3D Image restoration. But the feature point extraction processing takes approximately 7,200msec for VGA-resolution in embedded environment using ARM11(667Mhz) processor and 128Mbytes DDR memory, hence its real-time operation is not guaranteed. We analyzed integral image memory access pattern which is a key component of SURF algorithm to reduce memory access and memory usage to operate in c real-time. We assure feature extraction that using a Vertex-5 FPGA gives 60frame/sec of VGA image at 100Mhz.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.201-211
• /
• 2012

This paper addresses a Full Disk Encryption hardware processor for SATA HDD in a single FPGA design, and shows its experimental result using an FPGA board. The proposed processor mainly consists of two blocks: the first block processes XTS-AES block cipher which is the IEEE P1619 standard of storage media encryption and the second block executes the interface between SATA Host (PC) and Device (HDD). To minimize the performance degradation, we designed the XTS-AES block with the 4-stage pipelined structure which can process a 128-bit block per 4 clock cycles and has 4.8Gbps (max) performance. Also, we implemented the proposed design with Xilinx ML507 FPGA board and our experiment showed 140MB/sec read/write speed in Windows XP 32-bit and a SATA II HDD. This performance is almost equivalent with the speed of the direct SATA connection without FDE devices, hence our proposed processor is very suitable for SATA HDD Full Disk Encryption environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1219-1225
• /
• 2001

In this Paper we describe the design of synchronization algorithms for burst QPSK receiver, which are applicable to BWLL uplink. The demodulator consists of digital down converter, matched filter and synchronization circuits. For symbol timing recovery we ufo Gardner algorithm. And we use forth power method and decision directed method for carrier frequency recovery and phase recovery, respectively. For the sake of performance analysis, we compare simulation results with the board implemented by FPGA which is APEX20KE series chip for Alter. The performance results show it works quite well up to the condition that a frequency offset equal to 4.7% of symbol rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.307-310
• /
• 2001

In this paper we describe the design and implementation of uplink receiver for BWLL base station modem. The demodulator consists of digital down converter, matched filter and synchronization circuits. For symbol timing recovery we use Gardner algorithm. And we use forth power method and decision directed method for carrier frequency recovery and phase recovery, respectively. For the sake of performance analysis, we compare simulation results with the board implemented by FPGA which is APEX20KE series chip for Alter. The performance results show it works quite well up to the condition that a frequency offset equal to 4.7% of symbol rate.1

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.39-49
• /
• 2011

Turbo code needs long decoding time because of iterative decoding. To communicate with high speed, we have to shorten decoding time and it is possible with parallel process. But memory contention can cause from parallel process, and it reduces performance of decoder. To avoid memory contention, QPP interleaver is proposed in 2006. In this paper, we propose MDF method which is fit to QPP interleaver, and has relatively short decoding time and reduced logic. And introduce the design of MAP decode module using MDF method. Designed decoder is targetted to FPGA of Xilinx, and its throughput is 80Mbps maximum.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.990-994
• /
• 2003

This paper describes the VoIP(Voice over Internet Protocol) SoC(System on Chip) Design and the test board development for the function verification to support voice communication services using Internet. To implement the simple system of configuration, we designed the VoIP SoC which have ARM922T of 32bit microprocessor, IP network interface, voice signal interface, various user interface function. Also we developed test program and communication protocol to verify the function of this chip. We used several tools of design and simulation, developed and tested a test board with Excalibur which includes ARM922T microprocessor and FPGA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.325-329
• /
• 2007

In this paper, the modem based on EIA-709.2-A PL of powerline communication techniques which are considered to be important technologies for in-home control network systems was implemented via VHDL. In order to have the robust properties against existing noises over powerline channels, the information data using eight symbols was transmitted by transmitter and the receiver is composed of matched filter, averager, decision and detection parts in order to detect the right data from the received signals. The implemented PLC transceiver was downloaded into Altera's EP1S25C672 FPGA and the operation was verified successfully.