• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.21-24
• /
• 2002

This paper presents a fully integrated, wide tuning range differential CMOS voltage-controlled oscillator, tuned by pMOS-varactors. VCO utilizing a novel tuning scheme is reported. Both coarse digital tuning and fine analog tuning are achieved using pMOS-varactors. The VCO were implemented in a 0.18-fm standard CMOS process. The VCO tuned from 1.8㎓ to 2.55㎓ through 2-bit digital and analog input. At 1.8V power supply voltage and a total power dissipation of 8mW, the VCO features a phase noise of -126㏈c/㎐ at 3㎒ frequency offset.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1990.04a
• /
• pp.195-208
• /
• 1990

Flexible Manufacturing System(FMS) is an integrated, computer controlled complex of automated material handling devices and numerically controlled machine tools that can simultaneously process medium-sized volumes of a variety of part types. This paper discusses planning problems that can be solved for efficient use of an FMS and present an integrated decision support system for FMS production planning and scheduling problems. FMSDS(Flexible Manufacturing Systems Decision Support System) consists of data handling modules, part selection module, loading module, load adjusting module, scheduling module and simulation module etc. This paper presents the solution methodology of each subproblems and integrated interfaces between subproblems using hierarchical approaches and loop controls considering the relationships between subproblems. A case study by this model is presented.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.139-140
• /
• 2012

Facility Management (FM) is a project phase to maintenance and to increase the qualities of product which is planned on the design phase and ensured on the construction phase. In addition, since the approximate time occupied in operation and maintenance phase is the longest from construction project as total approximate cost is about 85% of whole the project, it could be managed and realized primarily. The information of facility is not created on the specific point of project, but it might be created on the whole process of subject project widely. Thus, as the information could not be lost and it can be delivered into computer aided facility management system, it is necessary to manage the facility information. This paper proposed the necessities and the problems of BIM-based data interoperability on the Korean construction projects.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.210-215
• /
• 2001

The pole antenna of vehicles for AM/FM radio broadcasting receptions has many probems, such as damageable mechanical system and noise etc. It is considered that noise is composed of the structural vibration noise and the air flow induced aerodynamic noise. Also we find out that the setting process of a printed on-glass automobile antenna has many difficulties. Recently, the above mentioned problems can be reduced by employing enhanced wiper antenna which utilizes the windshied wiper arm. The new system is a passive antenna. In this study, experiments for the characteristics of a wiper antenna by measuring the SWR, radiation pattern and received powe have been carried out. The experimental results show that the efficiency of the wiper antenna has better performance than any other antenna.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.63-72
• /
• 1999

Many firms have applied flexible manufacturing systems as a means of increasing productivity, profitability, and quality. Therefore, the purpose of this paper is to develop the more efficient justification model through an analytical scoring model with the quantitative factors, flexibility factors, and safety factors under uncertainty. In this paper, the three factors for properly comparing and evaluating of flexible manufacturing systems are presented. Especially, this paper has emphasized the flexibility and safety factor; the one consists of organization assessment, process treatment function, products and products quantity, useful life assesment, and software function, the other presents risk assesment, Y2K problem, safety device analysis, total productive management system, safety management. Finally, a normalized scoring model by the new flexibility and safety factors can be used in real fields for flexible manufacturing systems project selection under uncertainty.

• Journal of the Korea Society for Simulation
• /
• v.7 no.2
• /
• pp.45-62
• /
• 1998

This research is concerned with buffer management in a multi-cell FMS with an AGVS. Buffers in manufacturing systems are required to reduce blocking and starving caused by breakdowns, variability in process times, and diversity of part routing. Due to the high per unit buffer cost, which primarily consists of floor space and equipment costs, the total capacity of buffers in and FMS is very limited. Proper buffer management can provide a high system efficiency. This paper presents a buffer management model for a multi-cell FMS with an AGVS and a simulation study to compare the proposed model to a conventional buffer management model in a job shop FMS.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1994.10a
• /
• pp.9-9
• /
• 1994

FMS를 비롯한 대부분의 제조시스템의 운용을 위해서는 크게 전략적 의사결저오가 전술적 읫사결저이 필요하며, 이 중 전술적 의사결증은 부품 선택, 생산율 결정, 부하할당, 부품 투입, 일정계획 문제등과 관련되어 있다. 본 연구에서는 부품투입시점과 부품투입순서에 의해 결정된 부품투입 정책이 시스템 성능에 미치는 영향을 알아보기 위해서, 서울대학교부설 자동화시스템공동연구소(ASRI)내의 FMS/CIM Center를 대상으로 시뮬레이션을 수행하였다. ASRI-FMS /CIM Center 는 기계가공과 조립이 동시에 이루어지는 FMAS(Flexible Mauufacturing & Assembly System) 형태의 모형공장이며, 현재 세 종류의 모터 등을 생산할 수 있다. 본 연구에서는 고려한 부품투입시점 전략으로는 고정 WIP(Work-in-process)유지전략 , 병목기계 전략, 일정비율 투입전략 등이며, 부품 투입순서 전략으로는 크게 주기적 투입전략과 비주기적 투입전략을 고려하였다. 또한 이러한 부품 투입정책들이 시스템 내에서 적용할 수 있는 여러 가지 우선순위규칙 등과 함께 사용될 때, 나타나는 상호관계를 파악하기 위한 연구가 수행되었다. 아울러 병목기계 추가도입, 물류운반시간의 감소 등과 같이 가능한 범위에서 현재의 시스템 조건이 바뀐 상황에 대해서도 시뮬레이션을 수행함으로써, 추후 변경된 시스템에서도 본 연구의 결과가 적응될 수 있도록 하였다.

• International Journal of Quality Innovation
• /
• v.3 no.2
• /
• pp.57-73
• /
• 2002

Recent interests in total quality management (TQM) and business excellence (BE) had been fuelled with a range of national and regional awards. These awards are being increasingly used by organisations as part of the business improvement process and strategic benchmarking. This paper reviews the concepts and approaches of performance measurement (PM) and discusses the integration of PM with the TQM and BE philosophies. A TQM-BE-PM framework with a set of self-assessment checklists was developed. In order to complement the literature base with empirical evidence, an industry survey was conducted and a trial implementation of the framework was carried out in a leading manufacturing firm in Hong Kong. The self-assessment performance data of the fm was evaluated and then benchmarked with the industry averages obtained from the survey. This paper presents the empirical findings and discusses the applicability of the framework in measuring and benchmarking organisational performance toward continual improvement.

• Journal of Plant Biology
• /
• v.39 no.4
• /
• pp.301-307
• /
• 1996

The disassembly of Chl-protein complexes during dark-induced senescence (DIS) was investigated using detached third and fourthleaves of 21$\pm$1 day-old Arabidopsis thaliana. Although Chl content decreased linearly after 1 d, a significant decrease of photochemical effeciency (Fv/Fm) was observed after 2 d. In experiments using native green gel electrophoresis of Chl-protein complexes combined with additional two-dimensional SDS-PAGE analysis, we could observe the degradation of both photosystems after 2 d. Although light-harvesting complex(LHC) for PSI (LHCI) was degraded first in PSI complex, small PSII apoproteins including CP47/CP43 and D1/D2 apoproteins were degraded first in PSII complexes. LHC for PSII (LHCII) trimers were stable until 4 d. The level of LHCII monomers was increased until 3 and decreased thereafter, resulting in the increase of free pigments. These results suggest that the disassembly process of PSI is different from that of PSII.

• Electronics and Telecommunications Trends
• /
• v.39 no.2
• /
• pp.54-65
• /
• 2024

This paper examines the trends of AI Foundation Model development and the competition to lead the related ecosystem, which have been rapidly unfolding since the emergence of ChatGPT, focusing on big tech companies in the United States. Based on this understanding of background knowledge, I analyzed and presented the main contents of the initial report reviewed by the UK competition authority, CMA, on potential competition issues that may arise in the process of innovations resulting from FM development. In addition, the trend and background of the CMA's investigation into the OpenAI-Microsoft partnership, whose importance has recently been highlighted, were also explained. It is expected that a reasonable domestic policy plan will be established by referring to these UK policy trends and monitoring & analyzing domestic industries.