• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.19-26
• /
• 1972

A newly developed quartz frequency modulator utili3ing a V. V. C. diode is briefly described. Its electrical characteristics-including modulation linearity, modulation distortion, and carrier frequency stability depending upon the variation of the environmental temperature and the applied power voltage, etc.-are suitable for the modulator of a mobile or a portable F.M. transmitter according to the experimental results. The excellent over-all electrical characteristics were proved from the experimental development of the two kinds of transceivers. One is the single channal transceiver which contains a direct frequency modulator at the carrier frequency of 52.750 MHg. The other is the dual channel transceiver (the frequencies are selected from about 40 channels without tuning adjustment) whose operational frequency is composed of a modulated frequency of 10.7 MHz and the frequency generated at a channel control oscillator, As mentioned above, it is realized that the electrical characteristics of this modulation method are suitable for portable F. M. transceivers.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.242-245
• /
• 2012

본 보고서는 지상파방송 디지털 전환 과정에서 아직 전송방식조차 선정하지 못하고 있는 라디오의 디지털화 추진과 관련하여 AM 라디오의 DRM 전송방식에 의한 실험방송 조기 추진의 필요성과 의미를 설명하고, FM의 디지털화 역시 DRM+ 전송방식 중심으로 TV채널 5번과 6번 LOW-VHF 밴드 주파수 대역에서의 OUT-OF-BAND 방법으로 검토해 봄으로써 기존 FM송신기 및 안테나와 콤바인이 쉽고 우수한 신호 전달력을 가진 LOW-VHF대역 주파수를 효과적으로 활용할 수 있으며 각 사업자별로 출력지정과 권역설정이 자유로워 디지털시대에 맞는 새로운 서비스 환경 구축과 AM/FM대역 동일방식 디지털 라디오 보급을 할 수 있는 특징으로 인해 라디오의 디지털화 추진에 유리한 방안임을 확인해 보고자 한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.5
• /
• pp.27-39
• /
• 1971

It is described in this paper that a newly developed quartz frequency modulator using V. V. C. diode would be more suitable for mobile FM portable transmitter, than conventional reactance modulator because of less need for multiplier stages in the former type. It is realized by theoretical and experimental results what is the most optimum relationship between the quartz oscillator, V. V. C. diode and coupled circuit elements in order to get the desired modulation linearity and carrier frequency stability depending upon the variation of circumference temperature and suplied source voltages.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.617-622
• /
• 2008

최근 멀티미디어 산업의 급속한 발달로 다양한 목적의 멀티미디어 제품 군들이 있다. 이러한 멀티미디어 제품은 대부분 휴대용으로 리튬폴리머 배터리를 내장하여 언제 어디서나 듣고, 청취하기 위해 대부분이 소형화된 기기들이다. 본 논문은 모바일 휴대폰에 소형의 FN 송신무선 핸즈프리 기반을 접목하여 사운드 확장과 성능향상에 대하여 연구하였다 FM 주파수대역은 할당 받지 않은 개인이 사용하기에는 출력 제약을 받기 때문에 무선 성능이 좋지 않다. 이를 향상하기 위해 PCB 패턴 안테나를 설계와 함께 안테나 급전부 연결방법 연구 결과로 통화 잡음을 제거하여 좋은 출력특성결과를 가져왔다. 이후 이를 모바일 존에 적용하여 거리에 따른 통화 감도를 높이기 위한 마이 이득 조절기능과 무선 FM 송신으로 수신 측 스피커를 이용하여 청취하므로 사운드확장 장점이 있으며, 통화 잡음을 제거하기 위한 검증시험 및 통합시험을 수행하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.867-875
• /
• 2005

In this paper, we fabricated along distance wireless communication transmitter and receiver over the 100 which used NRD technology. To make the transmitter and receiver of 400Hz band using the non radiative dielectric wave guide, transmitter was composed of gm oscillator, m modulator and antenna, receiver was composed of local gum oscillator, balanced mixer, 3dB direction coupler and antenna. Also we executed a wireless communication image transmission examination to the transmitter and receiver. We receive the image information in real-time data transmission from receiver after we send the image signal in the wireless distance of the 10km. Therefore, the 400Hz band U transmitter and receiver to be developed will be used widely for the transmission system CATV or broadband transmission system. This will be utilized also to the link device of a long distance high speed wireless communication network.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.990-1003
• /
• 2012

In this paper, the possibility and necessity of the digital broadcasting propulsion in AM and FM is presented based on DRM and DRM+ transmission modes, They are the members of series technological family in digital radio development. As the frequency utilization, the application of DRM+ is flexible in any mode such as IN-BAND or OUT-OF-BAND. When the digital audio broadcasting is planned at LOW-VHF bandwidth such as TV channel No.5 and NO.6 being adjacent to FM band and OUT-Of-BAND DRM+ technology is applied, there is no collision and jamming. Particularly, in the IN-BAND Hybrid mode, it is mentioned that there was the difficulty problem for multiple SFN transmitters uses. Not like the IN-BAND mode the OUT-OF-BAND mode lets multiple transmitters, because neighbor transmitters do not interfere each other. Digital transmitter can be combined with the existing FM transmitter. The intensity of power and size of area can be easily determined according to local broadcasters' condition. And the OUT-OF-BAND mode is advantageous for AM/FM integration in digital radio receiver manufacturing, which makes the conversion schedule much shorter.

• Journal of Sensor Science and Technology
• /
• v.5 no.1
• /
• pp.43-50
• /
• 1996

This paper presents a manufacture of the multiple subjects biotelemetry system using custom CMOS IC fabricated $1.5{\mu}m$ n-well process technology. The implantable circuits of the system except sensor interface circuits including FM transmitter are fabricated on a single chip with the sire of $4{\times}4mm^{2}$. It is possible to assemble the implantable system in a hybrid package as small as $3{\times}3{\times}2.5cm$ by using this chip, It's main function is to enable continuous measurement simultaneously up to 7-channel physiological signals from the selected one among 8 subjects. Another features of this system are to enable continuous measurement of physiological signals, and to accomplish ON/OFF switching of an implanted battery by subject selection signal with command signal from the external circuit. If this system is coupled with another appropriate sensors in medical field, various physiological parameters such as pressure, pH and temperature are to be measured effectively in the near future.