• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.6
• /
• pp.531-539
• /
• 2013

Fingerprinting technique uses the radio signal strength measured reference locations is typically used, although there are many Wi-Fi based location tracking techniques. However, it needs numerous reference locations for precision and accuracy. This paper the analyzes problems of previous techniques and proposes a fingerprinting system using reliability based on a signal strength map. The system collects the signal strength data from a number of reference locations designated by the developer. And then it generates path-loss models to one of the access points for each reference location. These models calculate the predicted signal strength and reliability for a lattice. To evaluate proposed method and system performance, We perform experiments in a $20m{\times}22m$ real indoor environment installed access points. According to the result, the proposed system reduced distance error than RADAR. Comparing the existing system, it reduced about 1.74m.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.2
• /
• pp.113-118
• /
• 2023

The WiFi fingerprint method for location estimation within the home has the advantage of using the existing infrastructure and estimating absolute coordinates, so many studies are being conducted. Existing studies have mainly focused on the study of localization algorithms, but the improvement of accuracy has reached its limits. However, since a wireless LAN receiver such as a smartphone cannot measure signals smaller than the reception sensitivity of radio signals, the position estimation error varies depending on the method of processing these values. In this paper, we proposed a method to increase the location estimation accuracy by pre-processing the received signal data of the measured wireless LAN router in various ways and applying it to the existing algorithm, and greatly improved accuracy was obtained. In addition, the preprocessed data was applied to the KNN method and the CNN method and the performance was compared.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2177-2184
• /
• 2012

A different and effective method for indoor positioning system is needed and increased it's importance compare to the outdoor GPS based method. The FingerPrint positioning method is known as a superior method in indoor positioning system that maintains signal strength patterns for RPs(Reference Points) in database and compare the DB with the measured real-time signals on the mobile device. FingerPrint positioning method is necessary to establish an accurate database, but errors can occur by several factors. In this paper, we analyze the signal patterns of each terminal in accordance with connection state of access point and trace that the error in accordance with connection state of access point can be an important error in FingerPrint DB configuration through an experimental case study.

• Journal of Environmental Science International
• /
• v.26 no.4
• /
• pp.421-432
• /
• 2017

In this study, we examined the suitability of ten disinfection models for predicting the inactivation of Artemia sp. via single or combined physical and chemical treatments. The effect of Hydraulic Retention Time (HRT) on the inactivation of Artemia sp. was examined experimentally. Disinfection models were fitted to the experimental data by using the GInaFiT plug-in for Microsoft Excel. The inactivation model were evaluated on the basis of RMSE (Root Mean Square Error), SSE (mean Sum Square Error) and $r^2$. An inactivation model with the lowest RMSE, SSE and $r^2$ close to 1 was considered the best. The Weibull+Tail model was found to be the most appropriate for predicting the inactivation of Artemia sp. via electrolytic treatment and electrolytic-ultrasonic combined treatment. The Log-linear+Tail model was the most appropriate for modeling inactivation via homogenization and combined electrolytic-homogenization treatment. The double Weibull disinfection model was the most suitable for the predicting inactivation via ultrasonic treatment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1200-1215
• /
• 2023

With the development of IoT and artificial intelligence, location-based services are getting more and more attention. For solving the current problem that indoor positioning error is large and generalization is poor, this paper proposes a Model Stacking Algorithm for Indoor Positioning System using WiFi fingerprinting. Firstly, we adopt a model stacking method based on Bayesian optimization to predict the location of indoor targets to improve indoor localization accuracy and model generalization. Secondly, Taking the predicted position based on model stacking as the observation value of particle filter, collaborative particle filter localization based on model stacking algorithm is realized. The experimental results show that the algorithm can control the position error within 2m, which is superior to KNN, GBDT, Xgboost, LightGBM, RF. The location accuracy of the fusion particle filter algorithm is improved by 31%, and the predicted trajectory is close to the real trajectory. The algorithm can also adapt to the application scenarios with fewer wireless access points.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2437-2442
• /
• 2013

OFDM Wi-Fi AP is susceptible to the co-channel interference. As a countermeasure, the insertion of a smart has been addressed. Despite of the guaranteed efficiency, the complexity of the post-FFT algorithm often keeps itself from being selected as the countermeasure. Instead, simply constructed pre-FFT smart antenna of which the algorithm is based on the received signal covariance matrix is commonly used and the mathematical modeling of it has been deployed. Computer simulations evaluating the improved BER characteristics of the proposed pre-FFT using the covariance matrix of channel estimator output have been carried out. It has been demonstrated that channel matrix output based smart antenna is superior to that using received signal covariance matrix.

• KIISE Transactions on Computing Practices
• /
• v.23 no.2
• /
• pp.134-139
• /
• 2017

The existing screen mirroring systems are vulnerable to packet loss and inefficient for mobile devices with limited energy capacity. To overcome these problems, we propose a packet loss robust and energy efficient screen mirroring system for mobile device. The proposed system employs systematic Raptor codes for a forward error correction method to mitigate the video quality degradation that is caused by packet loss over wireless networks. For the mobile device energy saving, the proposed system shapes the screen mirroring traffic and adjusts the Raptor encoding parameters. In this paper, the proposed system is fully implemented on single board computers and is examined in a real Wi-Fi Direct network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1373-1392
• /
• 2017

WiFi Direct (WD) is a state of the art technology for a Device-to-Device (D2D) communication in 802.11 networks. The performance of the WD system can be significantly affected by some key factors such as the type of application, specifications of MAC and PHY layer parameters, and surrounding environment etc. It is, therefore, important to develop a system model that takes these factors into account. In this paper, we focus on investigating the design parameters of the PHY layer that could maximize the efficiency of the WD 802.11 system. For this purpose, a basic theoretical model is formulated for a WD network under a 2x2 Multiple In Multiple Out (MIMO) TGn channel B model. The design level parameters such as input symbol rate and antenna spacing, as well as the effects of the environment, are thoroughly examined in terms of path gain, spectral density, outage probability and Packet Error Rate (PER). Thereafter, a novel adaptive algorithm is proposed to choose optimal parameters in accordance with the Quality of Experience (QoE) for a targeted application. The simulation results show that the proposed method outperforms the standard method thereby achieving an optimal performance in an adaptive manner.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.4
• /
• pp.459-465
• /
• 2019

There is an increasing interest in health and research on methods for measuring human body information. The importance of continuously observing information such as the step change and the walking speed is increasing. At a person's gait, information about the disease and the currently weakened area can be known. In this paper, gait is measured using wearable walking module built in shoes. We want to make continuous measurement possible by simplifying gait measurement method. This module is designed to receive information of gyro sensor and acceleration sensor. The designed module is capable of WiFi communication and the collected walking information is stored in the server. The information stored in the server is corrected by integrating the acceleration sensor and the gyro sensor value. A band-pass filter was used to reduce the error. This data is categorized by the Gait Finder into walking and waiting states. When walking, each step is divided and stored separately for analysis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.123-126
• /
• 2011

As the number of users of smart phone and smart pad are increasing, the deployment of WiFi APs has been accelerated. Also Internet local broadcasting service will be activated near future. But transmission error is the critical problem, due to the one-way transmission of the data to the receivers. In this paper, FER is analysed according to BER and frame length, and repetitive transmission technique is proposed to reduce the effective FER.