• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1025-1031
• /
• 2007

This paper proposes an area-efficient pipeline FFT processor for MIMO-OFDM systems with four transmitting and four receiving antennas. Since the MIMO-OFDM system transmits multiple data streams, the complexity for the MIMO-OFDM system with a single-channel FFT processor increases linearly with the increase of the number of transmit channels. The proposed FFT processor is based on multi-channel structure, and therefore it can efficiently support multiple data streams. With the mixed radix algorithm, the number of non-trivial multiplications of the proposed FFT processor is decreased. The proposed FFT processor is synthesized with CMOS $0.18{\mu}m$ process and reduces the logic gates by 25% over a 4-channel Radix-4 multi-path delay commutator (R4MDC) FFT processor. Since the MIMO-OFDM FFT processor is one of the largest modules in the systems, the proposed FFT processor will be a vast contribution improvement to the low complexity design of MIMO-OFDM systems.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1241-1245
• /
• 2009

As FFT(Fast Fourier Transform) processor is used in OFDM(Orthogonal Frequency Division Multiplesing) system. According to increase requirement about mobility and broadband, Research about low power and low area FFT processor is needed. So research concern in reduction of memory size and complex multiplier is in progress. Increasing points of FFT increase memory area of FFT processor. Specially, SRU(Signal Reordering Unit) has the most memory in FFT processor. In this paper, we propose a reduced method of memory size of SRU in FFT processor. SRU of 64, 1024 point FFT processor performed implementation by VerilogHDL coding and it verified by simulation. We select the APEX20KE family EP20k1000EPC672-3 device of Altera Corps. SRU implementation is performed by synthesis of Quartus Tool. The bits of data size decide by 24bits that is 12bits from real, imaginary number respectively. It is shown that, the proposed SRU of 64point and 1024point achieve more than 28%, 24% area reduction respectively.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1488-1491
• /
• 1987

This paper describes 16-point FFT processor using systolic array and its implementation into VLSI. Designed FFT processor executes FFT/IFFT arithmetic under mode control and consists of cell array, array controller and input/output buffer memory. For design for testibility, we added built-in self test circuit into designed FFT processor. To verify designed 16-point FFT processor, logic simulation was performed by YSLOG on MICRO-VAXII. From the simulation results, it is estimated that the proposed FFT processor can perform 16-point FFT in about 4400[ns].

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.87-95
• /
• 2009

In this paper, an area-efficient FFT processor is proposed for MIMO-OFDM based SDR systems. The proposed scalable FFT processor can support the variable length of 64, 128, 512, 1024 and 2048. By reducing the required number of non-trivial multipliers with mixed-radix (MR) and multi-path delay commutator (MDC) architecture, the complexity of the proposed FFT processor is dramatically decreased without sacrificing system throughput The proposed FFT processor was designed in hardware description language (HDL) and synthesized to gate4eve1 circuits using 0.18um CMOS standard cell library. With the proposed architecture, the gate count for the processor is 46K and the size of memory is 64Kbits, which are reduced by 59% and 39%, respectively, compared with those of the 4-channel radix-2 single-path delay feedback (R2SDF) FFT processor. Also, compared with 4-channel radix-2 MDC (R2MDC) FFT processor, it is confirmed that the gate count and memory size are reduced by 16.4% and 26.8, respectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.75-81
• /
• 2015

This paper proposed the new eight-parallel MDC FFT processor using the eight-parallel MDC architecture and the efficient scheduling scheme. The proposed FFT processor supports the 256-point FFT based on the modified radix-$2^6$ FFT algorithm. The proposed scheduling scheme can reduce the number of complex multipliers from eight to six without increasing delay buffers and computation cycles. Moreover, the proposed FFT processor can be used in OFDM systems required high throughput and low hardware complexity. The proposed FFT processor has been designed and implemented with a 90nm CMOS technology. The experimental result shows that the area of the proposed FFT processor is $0.27mm^2$. Furthermore, the proposed eight-parallel MDC FFT processor can achieve the throughput rate up to 2.7 GSample/s at 388MHz.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.417-420
• /
• 1999

This paper present the architecture and design of FFT processor for the OFDM modulation. The OFDM modulation have a merit that use frequecncy efficiently and robust ISI. It needs FFR to have fast and large number of points. Moreover, this FFT design has pipeline architecture. R2$^2$SDF architecture for FFT processor has more advantage others. Therefore this paper present FFT processor used R2$^2$SDF architecture.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.429-435
• /
• 2018

In radar systems, FFT (fast Fourier transform) operation is necessary to obtain the range and velocity of target, and the design of an FFT processor which operates at high speed is required for real-time implementation. The perfect shuffle network is suitable for high-speed FFT processor. In particular, twice perfect shuffle network based on radix-4 is preferred for very high-speed FFT processor. Moreover, radar systems that requires various velocity resolution should support scalable FFT points. In this paper, we propose a 8~1024-point scalable FFT processor based on twice perfect shuffle network algorithm and present hardware design and implementation results. The proposed FFT processor was designed using hardware description language (HDL) and synthesized to gate-level circuits using $0.65{\mu}m$ CMOS process. It is confirmed that the proposed processor includes logic gates of 3,293K.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.255-260
• /
• 1999

This paper shows the design of a high throughput 512-point FFT processor. The performance target of the 512-point FFT processor is to achieve data symbol rate required for OFDM systems. The memory requirement of the 512-point FFT processor is minimized by adopting shuffle memory system. The hardware cost of the 512-point in processor is further reduced by using a complex multiplier with a new strength reduction method.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.1-10
• /
• 2010

In this paper, we present a fast Fourier transform (FFT) processor with four parallel data paths for multiband orthogonal frequency-division multiplexing ultra-wideband systems. The proposed 128-point FFT processor employs both a modified radix-$2^4$ algorithm and a radix-$2^3$ algorithm to significantly reduce the numbers of complex constant multipliers and complex booth multipliers. It also employs substructure-sharing multiplication units instead of constant multipliers to efficiently conduct multiplication operations with only addition and shift operations. The proposed FFT processor is implemented and tested using 0.18 ${\mu}m$ CMOS technology with a supply voltage of 1.8 V. The hardware- efficient 128-point FFT processor with four data streams can support a data processing rate of up to 1 Gsample/s while consuming 112 mW. The implementation results show that the proposed 128-point mixed-radix FFT architecture significantly reduces the hardware cost and power consumption in comparison to existing 128-point FFT architectures.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.5-8
• /
• 2002

In this paper, we are designed and verified a FFT/IFFT processor that is possible from the wireless LAN environment which is adopted international standard of the IEEE802.11a. The proposed architecture of the FFT/IFFT has Radix-2 64point SDF(single-path delay feedback) Pipeline technique and DIF(Decimation in Frequenct) structure. The FFT/IFFT processor has each 8 bit complex input-output and 6 bit Twiddle factor. we used Max-PlusII for simulation and can see that processor is properly operated