• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.67-74
• /
• 2001

In domestic, irregular walls such as T, L, H and Box shapes are considered as rectangular wall in the design of bearing wall apartment building. The strengths of walls, therefore, can be underestimated in case of using the current design process. Irregular walls are connected to each other as rigid joint so that part of the load can be resisted by the wall perpendicular to the load direction. This resistance can be caused by the effective width of perpendicular wall. This additional resistance by the perpendicular wall increases the strength of structural walls. The objective of this study is to evaluate the effective widths of flanged walls with different aspect ratios by using FEM analyses. the results from finite element method are compared with effective flange widths of some code provisions.

• 한국안전학회지
• /
• 제12권2호
• /
• pp.37-44
• /
• 1997

Composite materials have various complicated characteristics depending on the ply materials, ply orientations, ply stacking sequences and boundary conditions. Therefore, it is difficult to analyze composite materials. For efficient use of composite materials in engineering applications, the dynamic behavior such as natural frequencies and nodal patterns should be identified. This study presents FEM results for the free vibration of symmetrically and antisymmetrically laminated composite and hybrid composite rectangular plates. The natural frequencies of laminated composite rectangular plates having the various boundary conditions (completely clamped, 2-edge clamped, cantilevered) are experimentally obtained. In order to demonstrate the validity of the experiment, FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with that calculated by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.

• 소성∙가공
• /
• 제5권2호
• /
• pp.130-137
• /
• 1996

The sheet formability can be improved by the optimum drawbeads installation because draw-beads can control the flow of the metal into the die cavity when the punch enters into the die opening, In this study the drawing characteristics for step drawbead are analyzed by 2-D rigid -plastic FEM and also are measured experimentally. In addition for the validity of FEM theoretical results are compared with the experimental results. Especially the draw bead restrain-ing forces and the strain distributions of drawn specimens are obtained in both FEM and experiment. Also the effects of the drawbead dimensions drawing angles and blank holding forces on the drawing characteristics are investigated.

• 한국전산구조공학회논문집
• /
• 제18권1호
• /
• pp.21-28
• /
• 2005

본 논문에서는 유한요소법을 활용하여 소형전자기클러치(micro-electromagnetic clutch)에서 발생하는 마찰토크와 응답시간을 해석하였다. 소형전자기클러치의 설계변경과 최적화를 위하여 전자석클러치에서 자기장에 의하여 발생하는 전달토크와 응답시간을 정확하게 예측 할 것이 요구된다. 해석을 위하여 전자기장 이론을 기반으로 소형전자기클러치의 축대칭 모델을 구성하고 실제 재료 물성치를 대입하여 토크와 응답시간을 해석하고 유한요소 해석결과의 정확성을 검증하기 위하여 실험결과와 비교하였다. 토크와 응답시간의 해석결과는 실험데이터와 거의 일치하다는 것을 통하여 해석적 방법으로 토크와 응답시간을 예측할 수 있음을 확인 할 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.146-151
• /
• 2001

This study is an investigation for the ADS optimum design by using FEM. We write out program which express ADS perfectly and reduce the required time for correcting of model to the minimum in solution and manufacture result. We complete algorithm which can plan optimum forming of model by feedback error information in CAE. For that, we draw up ADS program which modeling rachet wheel by using visual LISP and telegraph to ANSYS, structural solution program, we can solve stress solution. Then we correct model by feedback date obtaining in solution process, repeat course following stress solution again and do modeling rachet wheel for optimum forming. That is our aim. As a result of experience, we can develope automatic design program using Visual LISP and exhibit ADS as modeling third dimension CAD for optimum design. Also, we develop optimum design algorithm using ADS and FEM. In rachet wheel, greatest equivalence stress originates in key groove comer and KS standard is proved the design for security.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.65-74
• /
• 2003

본 논문에서는 사면안정해석에 있어서의 유한요소법과 한계평형법의 결과를 나타내었다 해석의 타당성을 부여하기 위하여 유한요소법과 한계평형법에 의한 안전율을 비교하였으며, 각각의 방법에 의한 안전율이 잘 일치됨을 보여 전단강도감소기법을 사용한 유한요소해석이 사면안정해석에 있어서 효과적으로 사용될 수 있음을 확인하였다. 구성 법칙, 사면의 경사각, 흐름법칙, 그리고 유한요소망의 이산화에 따른 일련의 유한요소해석을 실시한 결과, 전단강도감소기법에 근거한 유한요소해석법은 안전율에 관하여 합리적인 결과를 제공할 수 있음을 확인하였고 유한요소해석결과는 구성법칙과 흐름법칙의 선택에 의해 상당한 영향을 받을 수 있음을 알 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.36-37
• /
• 2019

In domestic construction industry progress, construction and quality control of large structures are considered to be important as the superstructure and mass scale of structures. In the case of mass concrete, high hydration heat caused by cement hydration generates temperature stress by generating internal temperature difference with the concrete surface. These temperature stresses cause cracks to penetrate the concrete structure. A method of lowering the heat generation by incorporating Urea in order to reduce the concrete temperature crack has been proposed. In this study, the heat function coefficient for the FEM temperature crack analysis of the mass concrete containing the element was derived and the adiabatic temperature rise test was carried out according to the incorporation of the element. As a result of this experiment, the maximum temperature of 41 ± 1℃ was obtained irrespective of the amount of urea, and the maximum temperature decreased by 16.9℃ in concrete containing 40kg/㎥ of urea.

• Geomechanics and Engineering
• /
• 제9권4호
• /
• pp.415-426
• /
• 2015

Researches have been done to discover ways to strengthen peat soil deposits. In this model study, fibrous peat that is the most compressible types of peat has been reinforced with precast peat columns stabilized with ordinary Portland cement and polypropylene fibres. Rowe cell consolidation tests as well as plate load tests (PLTs) were conducted on various types of test samples to evaluate the strength and deformation of untreated peat and peat reinforced by various types of columns. PLTs were conducted in a specially designed and fabricated circular steel test tank. The compression index ($C_c$) and recompression index ($C_r$) of fibrous peat samples reduced considerably upon use of precast columns. Also, PLT results confirmed the results obtained from Rowe cell tests. Use of polypropylene fibres added to cement further decreased ($C_c$) and ($C_r$) and increased load bearing capacity of untreated peat. Finite element method (FEM) using Plaxis 3D was carried out to evaluate the stress distributions along various types of tested samples and also, to compare the deformations obtained from FEM analysis with the actual maximum deformations found from PLTs. FEM results indicate that most of the induced stresses are taken on the upper portion of tested samples and reach their maximum values below the loading plate. Also, a close agreement was found between actual deformation values obtained from PLTs and values resulted from FEM analysis for various types of tested samples.

• Composites Research
• /
• 제16권4호
• /
• pp.59-65
• /
• 2003

샌드위치 구조물의 응용된 형태인 스마트 스킨 구조물을 ABAQUS로 유탄요소 해석하였다. 심재로 쓰이는 하니컴은 일반적으로 두께 방향 강성 및 전단 강성만 제작회사에 의하여 제공된다. 이를 바탕으로 하니컴 재료의 물성을 추정하여 다른 방향의 제공되지 않는 물성을 계산하였고, 이를 유탄요소 해석시 물성 자료로 적용하였다. 또한, 스마트 스킨 구조물의 좌굴 및 3점 굽힘 거동을 유한요소 해석하였으며, 기존의 실험결과 및 이론값과 비교 분석하였다. 비교적 결과가 잘 일치하였다. 본 연구를 통하여서 하니컴의 물성을 상용 패키지에 적용하는 방법 및 타당한 근거를 제시하였고, 이 결과를 바탕으로 스마트 스킨 구조물을 상용패키지로 유한요소 해석시 지침을 제시할 수 있다

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.565-567
• /
• 2000

In this paper, the discharge characteristics of AC PDP, one of the leading technologies currently under development for large-area flat displays, is computed by using Finite Element Method(FEM) combined with Flux-corrected Transport(FCT) algorithm. Up to now, many simulations of AC PDP have been mainly done by Finite Difference Method(FDM). But we simulated the AC PDP by using FEM-FCT method which discretizes the region of interest with unstructured grids. FEM-FCT method can reduce the computational cost because of refining locally where the physical quantities have steep gradients and is more efficient in solving discharge problems, such as a AC PDP. Results are presented in Ne-Xe(4%) gas mixture for a gas pressure of 400 Torr and as the discharge proceeds, the space and time variations of the electron and ion densities, potential and wall charges on the dielectric are described. Results from our simulation by FEM-FCT are similar to those from simulation by FDM and are more efficient in computational cost reduction.