• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.424-429
• /
• 2008

Aircraft flutter analysis model consists of dynamic FE model and aerodynamic model. Dynamic FE model is composed of stiffness and mass model, and is used for the prediction of normal mode characteristics of the structure. Since aircraft flutter analysis is normally performed in the modal domain, dynamic FE model shall be constructed to describe the modal characteristics of the structure with sufficient accuracy. In this study, dynamic FE modeling method was described using full airframe FE model and structural and system weight data for aircraft flutter analysis. In addition, full airframe dynamic FE model for composite small aircraft was constituted for normal mode and flutter analysis, and the mass modeling results were compared with the target weight data to validate the mass modeling method proposed. Finally, full airframe flutter analysis of composite small aircraft was performed with the dynamic FE model and the aerodynamic model composed.

• 한국시뮬레이션학회논문지
• /
• 제11권3호
• /
• pp.13-22
• /
• 2002

This paper describes an automated evaluation of electrostatic field for micro motors whose sizes range 10 to 103um. Electric field modeling in micro motors has been generally restricted to in-plane two-dimensional finite element analysis (FEA). In this paper, the actual three-dimensional geometry of the micro motor is considered. An automatic FE mesh generation technique, which is based on the fuzzy knowledge processing and computational geometry techniques, is incorporated in the system, together with one of commercial FE analysis codes and one of commercial solid modelers. The system allows a geometry model of concern to be automatically converted to different FE models, depending on physical phenomena to be analyzed, electrostatic analysis and stress analysis and so on. The FE models are then exported to the FE analysis code, and then analyses are peformed. Then, analytical analysis and FE analysis about the torque generated by electrostatic micro motor are performed. The starting torque is proportional to $V^2$, the calculated starting torque from the two-dimensional analytical solutions are three times larger than those from the three-dimensional FE solutions.

• 대한화학회지
• /
• 제46권5호
• /
• pp.419-437
• /
• 2002

산성조건에서 $H_2O_2$에 의한 $Fe^{2+}$ 이온의 산화($Fe^{2+}{\to}Fe^{3+}$)반응과 $Fe^{3+}$이온과 $SCN^-$이온이 결합하여 붉은색 Fe$(SCN)^{3-x}_x$ 이온을 형성하는 착화반응을 도입한 흐름주입분석기법을 사용하여 $Fe^{2+}$이온과 $Fe^{2+}$이온이 공존하는 시료용액 중 각 이온들의 동시정량을 위한 분석법을 개발하였다. 이 분석법은 개별 이온들에 대한 정량단계에 앞서 혼합시료의 전처리($Fe^{2+}$이온의 예비산화 혹은 $Fe^{2+}$이온의 예비환원)단계를 거쳐야 하는 기존의 분석법들과는 달리 두가지 단계들을 동시에 수행할 수있다는 장점을 가진다. 이 분석법의 측정한계는 [$Fe^{2+}$]=6.00${\times}10^{-7}$M 이었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.31-36
• /
• 2003

In this study a relationship between SP curves and tensile properties was investigated by FE analysis on SP test with various assumed tensile properties. For the accuracy of FE analysis, SP test and tensile test were performed and those results were compared with FE analysis results. The yield load(Py) defined from the intersection point of two lines tangent to the elastic bending region and plastic bending region. And it was related specifically with yield stress(${\sigma}_0$) in FE analysis result curves. The slopes of FE analysis result curves normalized by yield stress(${\sigma}_0$) reflected the change of tensile properties regardless of yield stress(${\sigma}_0$) variation. Empirical relations were derived from these results. Tensile properties from these relations showed good agreement in FE analysis curve and tested curve.

• 소성∙가공
• /
• 제15권4호
• /
• pp.319-325
• /
• 2006

The laser forming process is a new flexible forming process without forming tools and external force, which is applied to various fields of industry. Especially, applications of the laser forming process focused on cutting, welding and marking process. In this paper, the laser bending process of sheet metal which is heated by laser beam and formed by internal stress is simulated by using thermo elastic-plastic analysis model. Based on the result of FE-analysis, the laser bending machine is made to obtain reliable data for sheet bending. Under the same condition as FE-analysis, the laser bending experiment has been performed to ver 펴 the result of FE-analysis and good agreement has been obtained between FE-analysis and experiments. Additional laser bending experiments have been performed to evaluate the laser bending machine.

• 한국자기학회지
• /
• 제11권6호
• /
• pp.272-277
• /
• 2001

FeMr에 의해 교환 바이어스된 synthetic antiferromagnet(CoFe/Ru/CoFe)을 가진 Top Ta/NiFe/CoFe/Cu/CoFe/Ru/CoFe/FeMn/Ta 스핀 밸브 구조를 마그네트론 스퍼터링법에 의해 증착하였다. 이러한 스핀 밸브에서는 자유층, 구속층등의 두께 및 조성이 층간 결합력의 세기를 비롯한 자성특성에 영향을 미치게 된다 후방산란법은 두께 및 조성에 대한 절대정량이 가능하며 비파괴 분석법이라는 장점을 지니고 있으나, 원자번호가 20번 이상인 주기율표상의 인접원소로 이루어진 자성박막을 분석하는데 있어서 신호의 중첩현상으로 인해 분석이 불가능하였다 본 연구에서는 element-specific 한 분석기술인 양성자 여기 X선 검출법과, 절대 정량이 가능하고 깊이분해능을 현저히 향상시킨 grazing-exit 후방산란법 (RBS : Rutherford Backscattering Spectrometry)을 동시에 사용하여 상호 보완적인 분석을 함으로써 스핀밸브에 대한 성분 및 두께에 대한 정량분석을 수행하였다. 이를 위하여 먼저 spin valve 구조에서 자성층인 NiFe, CoFe, FeMn 단일층이 증착된 시료에 대한 표준화를 수행함으로써 spin valve 구조에서 grazing-exit 후방산란 스펙트럼 상의 중첩된 신호를 Simulation을 통하여 분리가 가능하였으며, 특히 Ru층의 두께는 단위의 정확도로 측정이 가능 하였다

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.603-607
• /
• 1995

Static and dynamic response of a mechanical system can be easily and readily obtained using an approximate method such as the Finite Element Method. However, FE solution cannot be totally trusted, since there are many numerical uncertainies inherent in an FE analysis. FE solution error can be estimated based on FE analysis result. Error estimator shows the quality of the FE solution, and helps FE users to enhance the accuracy of the FE solution.

• 분석과학
• /
• 제5권1호
• /
• pp.73-77
• /
• 1992

Glow discharge 방출분광법을 이용하여 Zn-Fe 전기도금강판의 도금층을 정량분석하였다. 도금층의 조성 및 부착량에 대한 분석결과를 습식화학분석 결과와 비교하였을 때 두 방법에 의한 결과는 서로 잘 일치하였다.

• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.685-690
• /
• 2011

본 논문은 자동요소생성 시스템을 이용한 화학적펌프의 지진해석에 대한 내용이다. 전처리시스템을 CAD시스템, 유한요소 코드와 통합시킨 자동화된 해석시스템은 구조물 최적화 디자인에 효과적으로 사용되어 진다. 해석조건이 수반된 유한요소모델은 자동적으로 해석모델로 부터 생성되어 진다. 또한, 유한요소모델은 해석코드에 의해 자동적으로 해석되어 진다. 이 통합화된 유한요소 시뮬레이션 시스템의 효용성을 화학펌프와 같은 3차원 복잡구조물에 적용하여 보았다.

• 한국주조공학회지
• /
• 제25권1호
• /
• pp.36-39
• /
• 2005

The thermodynamic analysis of deoxidation in molten coppyr by Fe has been made. Equilibrium oxygen solubility saturated with FeO in Cu-Fe-O system has been derived without and with consideration of the solute interaction between Fe and O. The derived relationship of oxygen contents with Fe has been compared with the experimental results done by Kulkarni and the minimum oxygen solubility could be predicted by a simple first order interaction method, Wagner model.