• Structural Monitoring and Maintenance
• /
• v.10 no.3
• /
• pp.191-205
• /
• 2023

In this paper, through operational modal analysis and ambient vibration tests, the dynamic characteristics of a multi-span simply-supported reinforced concrete highway bridge deck was determined and the results were used to assess the quality of construction of the individual spans. Supporting finite element (FE) models were created and analyzed according to the design drawings. After carrying out the dynamic tests and extracting the modal properties of the deck, the quality of construction was relatively assessed by comparing the results obtained from all the tests from the individual spans and the FE results. A comparison of the test results among the different spans showed a maximum difference value of around 9.3 percent between the superstructure's natural frequencies. These minor differences besides the obtained values of modal damping ratios, in which the differences were not more than 5 percent, can be resulted from suitable performance, health, and acceptable construction quality of the bridge.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.35-44
• /
• 2021

In recent times, several studies have been conducted focusing on crashes occurring on the main segment of the highway. However, there is a dearth of research dealing with traffic safety relating to other highway facilities, especially ramp areas. According to the Korea Expressway Corporation's Expressway Information Service, 6,717 crashes have occurred on ramps in the five years from 2015~2019, which accounts for about 15% of all highway accidents. In this study, the simple and full safety performance functions (SPFs) were evaluated and explored using different statistical distributions (i.e., Poisson Gamma (PG) and Poisson Inverse Gaussian (PIG)) and techniques (i.e., fixed effects (FE) and random effects (RE)) to provide more accurate crash prediction models for highway ramp sections. Data on the geometric characteristics of traffic and roadways were collected from various systems and with extensive efforts using a street-view application. The results showed that the PIG models present more accurate crash predictions in general. The results also indicated that the RE models performed better than FE models for simple and full SPFs. The findings from this study offer transportation practitioners using the Korea Expressway Corporation's Expressway a dependable reference to enhance and understand traffic safety in ramp areas based on accurate crash prediction models and empirical evidence.

• Journal of Life Science
• /
• v.25 no.9
• /
• pp.1014-1020
• /
• 2015

This study suggests that fermented rice bran extract contains natural antioxidants. The contents of bioactive materials (e.g., polyphenolic compounds and flavonoids), antioxidative properties (DPPH (α,α'- diphenyl-β-picrylhydrazyl) free radical scavenging activity, Fe reducing, Cu reducing power, peroxidation of linoleic acid and rat hepatocyte microsome) were tested by in vitro experimental models using fermented rice bran (FRB) extract. The concentrations of phenolic compound and flavonoid were 19.92 mg/g and 11.56 mg/g, respectively. In oxidation in vitro models using DPPH free radical scavenging activity, (free radical scavenging activity 69.8%) Fe reducing power and Cu reducing power (effect of dose-dependent manner), Fe²⁺/ascorbate induced linolenic acid peroxidation by ferric thiocyanate and thiobarbituric acid (TBA) methods (inhibition activity 81%), and autooxidation of rat hepatic microsomes membrane (lipid peroxidation inhibition activity 38%), antioxidative activities were stronger in FRB extract than FRS (Fermented Rice and Soybean, positive control) extract and, these effects were dose-dependent manner. From these results, FRB extract was shown to have the most potent antioxidative properties and contain the highest amounts of antioxidative compounds such as phenolic compounds and flavonoids. Overall, these results may provide the basic data to understand the antioxidative properties of fermented rice bran for development of functional foods.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• Journal of Korean Society for Quality Management
• /
• v.31 no.1
• /
• pp.76-89
• /
• 2003

Recently, CMM have been recognized as a critical factor to validate the competitiveness of software organizations, even if the organizations have already achieved the ISO9001 certification. Furthermore, the new version of ISO9001:2000 is being required instead of ISO9001:1994. Both CMM and ISO9001 have a common point that they pursuit quality improvement for the organizations processes and products. Therefore, it is important to understand the similarities of specific requirements between the two models in software organizations which attempt to employ both of the models. From this background, this paper compares CMM and ISO9001 by considering the versions in 1994 and 2000 of ISO9001. The results of this research are likely to help software organizations ma]fe a decision for a strategy to adopt CMM and ISO9001.

• Earthquakes and Structures
• /
• v.10 no.4
• /
• pp.811-828
• /
• 2016

This study aims to present nonlinear time history analysis results of double leaf cavity wall (DLCW) reinforced concrete structure exposed to shake table tests. Simulation of the model was done by a Finite Element (FE) program. Shake table experiment was performed at the National Civil Engineering Laboratory in Lisbon, Portugal. The results of the experiment were compared with numeric DLCW model and numeric model of reinforced concrete structure with unreinforced masonry wall (URM). Both DLCW and URM models have two bays and two stories. Dimensions of the tested structure and finite element models are 1:1.5 scaled according to Cauchy Froude similitude law. The URM model has no experimental results but the purpose is to compare their performance level with the DLCW model. Results of the analysis were compared with experimental response and were evaluated according to ASCE/SEI 41-06 code.

• International Journal of High-Rise Buildings
• /
• v.1 no.1
• /
• pp.53-59
• /
• 2012

With the rise in CPU power and the generalization and popularity of computers, engineering practice also changed from hand calculations to 3D computer models, from elastic linear analysis to 3D nonlinear static analysis and 3D nonlinear transient dynamic analysis. Thanks to holistic design approach and current trends in freeform and contemporary architecture, BIM concept is no longer a dream but also a reality. BIM is not just providing a media for better co-ordination but also to shorten the round-the-clock time in updating models to match with other professional disciplines. With the parametric modeling tools, structural information is also linked with BIM system and quickly produces analysis and design results from checking to fabrication. This paper presents a new framework which not just linked the BIM system by means of parametric mean but also create and produce connection FE model and fabrication drawings etc. This framework will facilitate structural engineers to produce well co-ordinate, optimized and safe structures.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.6
• /
• pp.1310-1315
• /
• 1999

Polyphenolic compounds widely occurring in the traditional medicine plants have been reported to possess strong antioxidant activity. The antioxidative substances of water soluble extract from leaves, stem bark, root bark and fruit powder of Cudrania tricuspidata were tested in three different in vitro experimental models. In oxidation models using DPPH( , ' diphenyl picrylhydrazyl) method, Fe2+ induced linoleic acid peroxidation, and autooxidation of hepatic microsomal membranes, the antioxidative activities of water soluble extract from stem bark were strong than that from leaves and root bark. Fruits of Cudrania tricuspidata contained the highest amounts of polyphenolic compounds among the parts of this plant. The changes in polyphenolic compound contents of fruit powder caused by heat treatment (20oC, 40oC, and 60oC) were also monitored. After water blanching, contents of phenolic compounds was increased slightly in the following order; 20oC(1454mg), 40oC(1487mg), and 60oC(1511mg). These results supports that water soluble extracts from Cudrania tricuspidata contain antioxidative compounds.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.916-917
• /
• 2015

This paper deals with electromagneitc characteristics analysis of high-speed brushless DC motor. First, under same rated and restricted conditions, four models which have different slot combinations each other are designed using 2-d finite element (FE) analyses. Designed models are analyzed and compared in terms of core loss, copper loss, eddy-current loss, etc. On the basis of analysis results, it is found that the motor with a 2-pole PM rotor and a 6-slot stator has most outstanding performances in electromagnetic aspects.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.210-217
• /
• 2005

This study examined the effect of cancellous bone microstructure on stress distribution within a premolar tooth and a dental implant against mastication force by the micro-finite element method (FEM). The mandibular specimen including a premolar was obtained from a cadaver and scanned with micro-CT to obtain CT images. FE models were reconstructed from CT images at mid-sagittal plane of the tooth. Six models were generated and analyzed for different structure and density in cancellous bone. Stress distributions fur each implant (or tooth) and the surrounding bone were compared. The study indicated that the microstructure of cancellous bone should be considered in finite element analysis to produce reasonable results and thus implant systems with high success rate.