• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.7-12
• /
• 1998

The wave reflections from several types of open-ended coaxial probes contacted on the various materials have been analyzed precisely by using the finite-difference time-domain(FDTD) technique in this paper. Due to the coordinate transformation from three-dimension to two-dimension, the computation was performed very efficiently. It was found that the reflection from an open-ended coaxial probe reduces as frequency or diameter of a coaxial line increases. The reflections from multi-layered media were also analyzed by the FDTD method. This analysis technique was verified by comparison with measurements and theoretical computations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.584-590
• /
• 2003

In this paper, the numerical characteristics of the recently developed Envelope ADI-FDTD are investigated. Through numerical simulations, it is shown that the unconditional stability of the Envelope ADI-FDTD is independent of time step size and we can get better dispersion accuracy than the traditional ADI-FDTD by analyzing the envelope of the signal. This fact gives the opportunity for extending the temporal step size to the Nyquist limit in certain cases. Numerical results show that the Envelope ADI-FDTD can be used as an efficient electromagnetic analysis tool especially in the single frequency or band limited systems.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.12-16
• /
• 2009

This paper presents a new iterative locally one-dimensional [mite-difference time-domain(LOD-FDTD) method that has a simpler formula than the original iterative LOD-FDTD formula[l]. There are fewer arithmetic operations than in the original LOD-FDTD scheme. This leads to a reduction of CPU time compared to the original LOD-FDTD method while the new method exhibits the same numerical accuracy as the iterative ADI-FDTD scheme. The number of arithmetic operations shows that the efficiency of this method has been improved approximately 20 % over the original iterative LOD-FDTD method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.98-105
• /
• 2013

This paper presents a finite-difference time-domain(FDTD) simulation and a data processing technique for radar sensing of the internal structure of a wall using an ultra-wide band antenna. We first designed an ultra-wide band anti-podal vivaldi antenna with a frequency range of 0.3~7 GHz which is chosen to be relatively low after considering the characteristics of wave attenuation, wall penetration, and range resolution. In this study the two-dimensional FDTD technique was used to simulate a wall-penetration-radar experiment under practical conditions. The next, the measured radiation pattern of the practical antenna is considered as an equivalent source in the FDTD simulation, and the reflection data of a concrete wall and targets are obtained by using the simulation. Then, a data processing technique has been applied to the FDTD reflection data to get a radar image for remote sensing of the internal structure of the wall. We compared the two different source excitations in the FDTD simulation; (1) commonly-used isotropic point sources and (2) polynomial curve fitting sources of the measured radiation pattern. As a result, when we apply the measured antenna pattern into the FDTD simulation, we could obtain about 2.5 dB higher signal to noise level than using a plane wave incidence with isotropic sources.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.13-16
• /
• 2004

In this paper, FDTD analysis of the bow-tie antenna is investigated by incorporating static field solution that is suitable to the bow-tie antenna without increasing computational time. Transforming static feld solution to the rotated grid system, we can obtain the transformed static field solution which is able to represent field behavior near the oblique edge line of the bow-tie antenna. The result shows a good agreement with a MoM analysis and is compared conformal modeling technique and regular FDTD method.

• Journal of electromagnetic engineering and science
• /
• v.5 no.2
• /
• pp.87-91
• /
• 2005

This paper presents a Monte-Carlo FDTD technique to determine the scattered field from a perfectly conducting surface like a sea surface, from which the useful information on the incoherent pattern tendency could be observed. A one-dimensional sea surface used to analysis scattering was generated using the Pierson-Moskowitz model. In order to verify the numerical results by this technique, these results are compared with those of the small perturbation method, which show a good match between them. To investigate the incoherent pattern tendency involved, the dependence of the back scattering coefficients on the different wind speed(U) is discussed for the back scattering case.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.108-114
• /
• 2012

We propose a dispersive finite-difference time domain(FDTD) algorithm suitable for the electromagnetic analysis of the human body. In this work, the dispersion relation of the human body is modeled by a quadratic complex rational function(QCRF), which leads to an accurate and efficient FDTD algorithm. Coefficients(involved in QCRF) for various human tissues are extracted by applying a weighted least square method(WLSM), referred to as the complex-curve fitting technique. We also presents the FDTD formulation for the QCRF-based dispersive model in detail. The QCRFbased dispersive model is significantly accurate and its FDTD implementation is more efficient than the counterpart of the Cole-Cole model. Numerical examples are used to show the validity of the proposed FDTD algorithm.

• Journal of electromagnetic engineering and science
• /
• v.18 no.3
• /
• pp.212-214
• /
• 2018

The finite-difference time-domain (FDTD) model was developed to analyze electromagnetic (EM) wave propagation in an inhomogeneous ionosphere. The EM analysis of ionosphere is complicated, owing to various propagation environments that are significantly influenced by plasma frequency, cyclotron frequency, and collision frequency. Based on the simple auxiliary differential equation (ADE) technique, we present an accurate FDTD algorithm suitable for the EM analysis of complex phenomena in the ionosphere under arbitrary-direction geomagnetic field. Numerical examples are used to validate our FDTD model in terms of the reflection coefficient of a single magnetized plasma slab. Based on the FDTD formulation developed here, we investigate EM wave propagation characteristics in the ionosphere using realistic ionospheric data for South Korea.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.667-673
• /
• 2000

This paper presents the modeling method of nonlinear circuits with lumped elements by using a hybrid Haar -wavelet MRTD/FDTD techniques. To analyze nonlinear circuits with lumped elements, the Haar-wavelet MRTD scheme is applied to the entire structure of interest and the conventional FDTD scheme is locally used to describe the characteristics of the lumped elements. To validate the scheme, microstrip structure with lumped elements and a single diode mixer are simulated.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.106-115
• /
• 2010

Because of space limitations, interferences between antennas of the KSLV-I communication systems occur and their effects become worse during all sorts of tests such as the flight test using a light plane. In this paper, coupled signal magnitude is calculated using the FDTD method. The theory of the FDTD, absorbing boundary condition, source input technique, and post processing of data are explained. The calculated coupling factor between two IFAs, which have 2 GHz resonance frequency and placed 5 cm apart, is -12.7 dB. Applied coupling calculation method can be effectively used for KSLV-I performance analysis, subsystem design, antenna arrangement, and communication link budget for the next space launch vehicle.