• 자원리싸이클링
• /
• 제12권1호
• /
• pp.55-64
• /
• 2003

현재 국내에서는 원유처리과정에서 발생하는 FCC 폐촉매로부터 금속 제거를 통한 촉매의 재활용은 시도된 적이 없으며 금속 불순물에 대한 분리 기술도 현재 정립되어있지 않은 상태이다. 현재 폐기물로서만 취급되어 온 FCC 페촉매로부터 유용성분의 회수 및 탈금속 가능성의 여부를 확인한다면 폐기물의 재활용 측면뿐만 아니라 폐기물의 효율적 처리, 그리고 경제적 소재화 측면에도 기여하는 바가 클 것으로 생각된다. 본 연구에서는 폐촉매에 부착된 Fe, Ni, V 등 금속의 물리화학적 성질에 따라 직접 혹은 산화 가열한 후, 자력 선별법을 통해 폐촉매로부터의 불순물 분리에 대한 조사를 수행하고 이에 따른 촉매의 재사용 가능성에 대해 검토하였다. 자력선밀 실험결과, 산화된 FCC 폐촉매에 비해 비산화 폐촉매가 상대적으로 자력에 의한 선별성이 높은 것으로 관찰되었으며, 스크린 매트릭스 방법보다 볼 매트릭스 방법을 적용하였을 경우 선별력이 양호한 것으로 나타났다. 선별효율은 자장세기의 증가에 따라 증가하는 경향을 보였으며, 볼 매트릭스 방법은 최대 51.10%의 선별력을 가지고 있는 것으로 나타났다. 선별된 시료들의 ICP 분석결과, V, Ni, Fe 의 순으로 금속성분이 존재하는 것을 관찰할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.964-968
• /
• 2001

The refractory-lined pipe is used to protect the system from high-temperature of the internal flow. The property of the refractory has an effect upon the stress analysis for fluid catalyst cracking(FCC) unit piping design. The equivalent elastic modulus and density considering steel and refractory must be applied in the stress analysis of the system. In the research, the theoretical method to obtain the value of the equivalent property is introduced and then the parametric analysis is carried out to understand the characteristic of the material properties.

• 한국환경과학회지
• /
• 제31권12호
• /
• pp.1103-1115
• /
• 2022

The adsorption characteristics of four pesticides (phosphamidon, fenitrothion, triadimefon, and diniconazole) on natural clinoptilolite (CLI_N) and three synthetic zeolites were investigated. The synthetic zeolites included faujasite (FAU_F) synthesized from coal fly ash; the mixture of FAU and Na-P1 (FAU + Na-P1)_SF synthesized using Jeju scoria and coal fly ash at the ratio of 1.5 by weight; and waste fluid catalytic cracking catalyst (FCC_W). The distribution coefficient, K_D and the Freundlich constant, K_F decreased in the following sequence: FCC_W > FAU_F > (FAU + Na-P1)_SF > CLI_N among the zeolites and diniconazole>fenitrothion> triadimefon> phosphamidon among the pesticides. The pesticide adsorptivity increased with increasing temperature for FAU_F, (FAU+Na-P1)_SF and FCC_W, however, it decreased for CLI_N, regardless of the type of pesticide. The adsorptivity of pesticides was independent of pH for phosphamidon, fenitrothion and triadimefon, whereas it decreased with increasing pH for diniconazole, regardless of zeolite type.

• 한국환경과학회지
• /
• 제10권6호
• /
• pp.451-459
• /
• 2001

Adsorption characteristics of triadimefon and diniconazole(pesticide) by natural zeolite($CLI_N$) and several synthetic zeolites were Investigated. The synthetic zeolites used En this study were as follows: Faujasite synthesized from coal fly ash($FAU_F$); Zeolite synthesized from the mixture of FAU and Na-Pl synthesized from the ratio of Cheju scoria 6 to coal fly ash 4 by weight($(FAU + Na-Pl)_{SF}$); waste fluid catalytic cracking catalyst($FCC_W$). The distribution coefficient, $K_D$ and Freundlich constant, $K_F$ decreased in the fellowing sequence : $FCC_W ＞ FAU_F ＞ (FAU + Na-Pl)_{SF} ＞CLI_N$ among the zeolites. The distribution coefficient and the adsorption capacity of $(FAU + Na-Pl)_{SF}$ for pesticides were 4.4 and 2.6 times higher for triamefon, and 2.0 and 2.4 times higher for diniconazole than those of $CLI_N$, respectively.

• 한국재료학회지
• /
• 제13권1호
• /
• pp.24-30
• /
• 2003

The Raney Ni catalyst was fabricated by mechanochemically process(MC process) in the Al-Ni system. Intermetallic compound obtained by mechanical alloying was leached in an alkaline solution. The characteristics of the mechanically alloyed powder and Raney Ni catalyst were analyzed by XRD, ICP-AES and EXAFS. In Al-50wt.%Ni, the metastable intermetallic compound phase close to AlNi phase was obtained by mechanical alloying unlike Al-Ni equilibrium phase diagram. The metastable intermetallic compound was transformed into $Al_3$$Ni_2$phase via the annealing at $750^{\circ}C$. The microstructure of Raney Ni fabricated by MC process was mainly bcc Ni including fcc Ni.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.667-673
• /
• 2009

The electrocatalytic characteristics of oxygen reduction reaction of the $PtxM_{(1-x)}$ (M = Co, Cu, Ni) supported on multi-walled carbon nanotubes (MWNTs) have been evaluated in a Polymer Electrolyte Membrane Fuel Cell (PEMFC). The $Pt_xM_{(1-x)}$/MWNTs catalysts with a Pt : M atomic ratio of about 3 : 1 were synthesized and applied to the cathode of PEMFC. The crystalline structure and morphology images of the $Pt_xM_{(1-x)}$ particles were characterized by X-ray diffraction and transmission electron microscopy, respectively. The results showed that the crystalline structure of the Pt alloy particles in Pt/MWNTs and $Pt_xM_{(1-x)}$/MWNTs catalysts are seen as FCC, and synthesized $Pt_xM_{(1-x)}$ crystals have lattice parameters smaller than the pure Pt crystal. According to the electrochemical surface area (ESA) calculated with cyclic voltammetry analysis, $Pt_{0.77}Co_{0.23}$/MWNTs catalyst has higher ESA than the other catalysts. The evaluation of a unit cell test using Pt/MWNTs or $Pt_xM_{(1-x)}$/MWNTs as the cathode catalysts demonstrated higher cell performance than did a commercial Pt/C catalyst. Among the MWNTs-supported Pt and $Pt_xM_{(1-x)}$ (M = Co, Cu, Ni) catalysts, the $Pt_{0.77}Co_{0.23}$/MWNTs shows the highest performance with the cathode catalyst of PEMFC because they had the largest ESA.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2019년도 정기학술대회 발표논문집
• /
• pp.83-83
• /
• 2019

Increasing the CO₂ concentration in the atmosphere induce high temperature and rising sea levels. So the technology that capture and reuse of the CO₂ have been recently become popular. Among other methods, CRR(CO2₂ reduction reaction) is typical method of CO₂ reusing. Electrocatalyst can show more higher efficiencies in CRR than photocatalyst because it doesn't use nature source. Nowadays, finding high efficient electrocatalyst by controlling electronic (affected by stoichiometry) and geometric (affected by atomic arrangement) factors are very important issues. Mono-atomic electro-catalyst has limitations on controlling binding energy because each intermediate has own binding energy range. So the Multi-metallic electro-catalyst is important to stabilize intermediate at the same time. Carbon monoxide(CO) which is our target product and important feedstock of useful products. Au is known for the most high CO production metal. With copper, Not only gold/copper has advantages which is they have FCC packing for easily forming solid solution regardless of stoichiometry but also presence of adsorbed CO on Cu promotes the desorption of CO on Au because of strong repulsion. And gold/copper bi-metal catalyst can show high catalytic activity(mass activity) although it has low selectivity relatively Gold. Actually, multi-metallic catalyst structure control method is limited in the solution method which is takes a lot of time. In here, we introduce CTS(carbo thermal shock) method which is using heat to make MMNP in a few seconds for making gold-copper system. This method is very simple and efficient in terms of time(very short reaction time and using carbon substrate as a direct working electrode) and increasing reaction sites(highly dispersed and mixing alloy structures). Last one is easy to control degree of mixing and it can induce 5 or more metals in one alloy system. Gold/copper by CTS can show higher catalytic activity depending on metal ratio which is altered easily by changing simple variables. The ultimate goals are making CO₂ test system by CTS which can check the selectivity depending on metal types in a very short time.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3055-3058
• /
• 2013

Methanesulfonic acid (MSA) was used as catalyst to remove trace organic sulfur (thiophene) from Fluid Catalytic Cracking gasoline (FCC) via alkylation with olefins. The reactions were conducted in Erlenmeyer flask equipped with a water-bath under atmospheric pressure. The influence of the temperature, the reaction time, and the mass ration of MSA were investigated. After a 60 min reaction time at 343 K, the thiophene conversion of 98.7% was obtained with a mass ration of MSA to oil of 10%. The catalyst was reused without a reactivation treatment, and the thiophene conversion reached 92.9% at the third time. The method represents an environmentally benign route to desulfur, because MSA could easily be separated from the reaction mixture via decantation and it could be reused.

• 한국재료학회지
• /
• 제19권5호
• /
• pp.233-239
• /
• 2009

The electrocatalytic behavior of the PtCo catalyst supported on the multi-walled carbon nanotubes (MWNTs) has been evaluated and compared with commercial Pt/C catalyst in a polymer electrolyte membrane fuel cell(PEMFC). A PtCo/MWNTs electrocatalyst with a Pt:Co atomic ratio of 79:21 was synthesized and applied to a cathode of PEMFC. The structure and morphology of the synthesized PtCo/MWNTs electrocatalysts were characterized by X-ray diffraction and transmission electron microscopy. As a result of the X-ray studies, the crystal structure of a PtCo particle was determined to be a face-centered cubic(FCC) that was the same as the platinum structure. The particle size of PtCo in PtCo/MWNTs and Pt in Pt/C were 2.0 nm and 2.7 nm, respectively, which were calculated by Scherrer's formula from X-ray diffraction data. As a result we concluded that the specific surface activity of PtCo/MWNTs is superior to Pt/C's activity because of its smaller particle size. From the electrochemical impedance measurement, the membrane electrode assembly(MEA) fabricated with PtCo/MWNTs showed smaller anodic and cathodic activation losses than the MEA with Pt/C, although ohmic loss was the same as Pt/C. Finally, from the evaluation of cyclic voltammetry(CV), the unit cell using PtCo/MWNTs as the cathode electrocatalyst showed slightly higher fuel cell performance than the cell with a commercial Pt/C electrocatalyst.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.180-185
• /
• 2011

This study is aimed to increase the activity of cathodic catalysts for PEMFCs(Polymer Electrolyte Membrane Fuel Cells). we investigated the temperature effect of 20wt% Pt/C catalysts at five different temperatures. The catalysts were synthesized by using chemical reduction method. Before adding the formaldehyde as reducing agent, process was undergone for 2 hours at the room temperature (RT), $40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ and $100^{\circ}C$, respectively. The performances of synthesize catalysts are compared. The electrochemical oxygen reduction reaction (ORR) was studied on 20wt% Pt/C catalysts by using a glassy carbon electrode through cyclic voltammetric curves (CV) in a 1M H2SO4 solution. The ORR specific activities of 20wt% Pt/C catalysts increased to give a relative ORR catalytic activity ordering of $80^{\circ}C$ > $100^{\circ}C$ > $60^{\circ}C$ > $40^{\circ}C$ > RT. Electrochemical active surface area (EAS) was calculated with cyclic voltammetry analysis. Prepared Pt/C (at $80^{\circ}C$, $100^{\circ}C$) catalysts has higher ESA than other catalysts. Physical characterization was made by using X-ray diffraction (XRD) and transmission electron microscope (TEM). The TEM images of the carbon supported platinum electrocatalysts ($80^{\circ}C$, $100^{\circ}C$) showed homogenous particle distribution with particle size of about 2~3.5 nm. We found that a higher reaction temperature resulted in more uniform particle distribution than lower reaction temperature and then the XRD results showed that the crystalline structure of the synthesized catalysts are seen FCC structure.