• ETRI Journal
• /
• v.19 no.3
• /
• pp.228-241
• /
• 1997

In this paper, we present a design of modem and vocoder digital signal processor (DSP) chips for CDMA mobile station. The modem chip integrates CDMA reverse link modulator, CDMA forward link demodulator and Viterbi decoder. This chip contains 89,000 gates and 29 kbit RAMs, and the chip size is $10 mm{\times}10.1 mm$ which is fabricated using a $0.8{\mu}m$ 2 metal CMOs technology. To carry out the system-level simulation, models of the base station modulator, the fading channel, the automatic gain control loop, and the microcontroller were developed and interfaced with a gate-level description of the modem application specific integrated circuit (ASIC). The Modem chip is now successfully working in the real CDMA mobile station on its first fab-out. A new DSP architecture was designed to implement the Qualcomm code exited linear prediction (QCELP) vocoder algorithm in an efficient way. The 16 bit vocoder DSP chip has an architecture which supports direct and immediate addressing modes in one instruction cycle, combined with a RISC-type instruction set. This turns out to be effective for the implementation of vocoder algorithm in terms of performance and power consumption. The implementation of QCELP algorithm in our DSP requires only 28 million instruction per second (MIPS) of computation and 290 mW of power consumption. The DSP chip contains 32,000 gates, 32K ($2k{\times}16\;bit$) RAM, and 240k ($10k{\times}24\;bit$) ROM. The die size is $8.7\;mm{\times}8.3\;mm$ and chip is fabricated using $0.8\;{\mu}m$ CMOS technology.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.1-5
• /
• 2023

Most of the production process is performed in a cleanroom in the case of facilities that produce semiconductor chips or display panels. Therefore, environmental management of cleanrooms is very important for product yield and quality control. Among them, airborne particles are a representative management item enough to be the standard for the actual cleanroom rating, and it is a part of the Fab or Facility monitoring system, and the sequential particle monitoring system is mainly used. However, this method has a problem in that measurement efficiency decreases as the length of the sampling tube increases. In addition, a statistically significant test of deterioration in efficiency has rarely been performed. Therefore, in this study, the statistically significant test between the number of particles measured by InSitu and the number of particles measured for each sampling tube ends(Remote). Through this, the efficiency degradation problem of the sequential particle monitoring system was confirmed by a statistical method.

• Journal of Life Science
• /
• v.19 no.11
• /
• pp.1672-1678
• /
• 2009

The purified antifungal substances produced by Bacillus amyloliquefaciens IUB158-03 was positive to ninhydrin but negative to aniline, suggesting that the antifungal substance could be a peptide. FAB-MS, UV adsorption spectrum, and amino acid composition analysis revealed that the molecular weight of the antifungal substance was 1042 and that maximal adsorption was at 220 nm and 277 nm. The antifungal substance was composed of $Asn_3$, $Gln_2$, $Ser_1$, $Gly_1$, and $Tyr_1$. The composition and structural characteristics of antifungal substance were analysed by $^1H$-NMR spectrum, $^1H$-COSY, HMQC, which revealed that the compound belongs to the iturin A family. Temperature and pH had little effect on the stability of the antifungal substance in the ranges of $-70{\sim}121^{\circ}C$ and pH 6.0~10.0, respectively. It showed strong antibiotic activity against fungi. An in vitro cytotoxicity test using NIH3T3 cell showed that the antifungal substance does not have cytotoxicity. The number of circulating leukocytes and the hematobiological analysis of the mice administered with the antifungal substances was similar to those of the control group, indicating no cytotoxicity in vivo. Therefore, the antifungal substances extracted from culture broth of Bacillus amyloliquefaciens IUB158-03 have future potential as biocontrol agents against plant diseases caused by fungi.

• Sleep Medicine and Psychophysiology
• /
• v.20 no.1
• /
• pp.15-21
• /
• 2013

Objectives: Cognitive impairment in restless legs syndrome (RLS) patients can be affected by sleep deprivation, anxiety and depression, which are common in RLS. The objective of this study is to investigate relationship between cognitive impairment and RLS in the non-medicated Korean elderly with controlling for psychiatric conditions. Method: The study sample for this study comprised 25 non-medicated Korean elderly RLS patients and 50 age-, sex-, and education- matched controls. All subjects were evaluated with comprehensive cognitive function assessment tools- including the Korean version of Consortium to Establish a Registry for Alzheimer's Disease Assessment Packet (CERAD-K), severe cognitive impairment rating scale (SCIRS), frontal assessment battery (FAB), and clock drawing test (CLOX). Sleep quality and depression were also assessed with Pittsburgh sleep quality index (PSQI) and geriatric depression scale (GDS). Results: PSQI and GDS score showed no difference between RLS and control group. There was no significant difference between two groups in nearly all the cognitive function except in constructional recognition test, in which subjects with RLS showed lower performance than control group (t=-2.384, p=0.02). Subjects with depression ($GDS{\geq}10$) showed significant cognitive impairment compared to control in verbal fluency, Korean version of Mini Mental Status Examination in the CERAD-K (MMSE-KC), word list memory, trail making test, and frontal assessment battery (FAB). In contrast, no difference was observed between subjects who have low sleep quality (PSQI>5) and control group. Conclusions: At the exclusion of the impact of insomnia and depression, cognitive function was found to be relatively preserved in RLS patients compared to control. Impairment of visual recognition in RLS patients can be explained in terms of dopaminergic dysfunction in RLS.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.721-727
• /
• 2021

This paper proposes a UWB (Ultar-wideband) impulse generator using the gated ring oscillator. The oscillator and PLL circuits which generate a several GHz LO signal for the conventional architecture are replaced with the gated ring oscillator. Therefore, the system complexity is decreased. The proposed architecture controls the duty of enable signal, which is used for the head switch of ring oscillator. The control of the duty enables to tun off the oscillator during the guard interval and stop wasting the power consumption. The pulse shaping method using the counter makes the small side lobe and preserves the bandwidth regardless of the change on the center frequency. Designed UWB impulse generator could change the center frequency from 6.0 GHz to 8.8 GHz with a digital bit control, while it preserves the bandwidth as about 1.5 GHz.

• Journal of Microbiology
• /
• v.41 no.3
• /
• pp.196-201
• /
• 2003

The object of this study was to characterize Bacillus strains GB-017 and GB-0356, which produce antifungal substances, especially for plant pathogens. In addition, this study was undertaken to characterize the culture conditions required for the production of antifungal substances and to document some of the properties of the antifungal substance produced by these soil-isolated strains. Strains GB-0365 and GB-017 were found to be bacillus-shaped, gram-positive and motile, and to inhibit Botrytis cineria, Fusarium sp., Pythium sp., and Rhizoctonia solani. Antagonistic activity was maintained up to pH 9.0, and the antifungal activity was stable to heat at 80$^{\circ}C$ for 1 h. Antifungal substances were separated and purified using ion exchange and adsorption columns including WK-I0(H$\^$＋) (pH 7.0), HP20 column (pH 3.0) and IPA (pH 3.0). and IPA. Its UV absorption spectrum showed major peaks at 231 and 259 nm, corresponding to polyene and lactone. A fast atom bombardment mass spectrum (FAB MS) showed a highest peak at 441 m/z and major peaks at 192, 205, and 370 m/z.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.4
• /
• pp.139-146
• /
• 2017

PURPOSE: The purpose of this study was to systematically analyze the reliability and validity of the Korean-version of the balance assessment tools. METHODS: Two reviewers of this study independently evaluated the titles of articles and abstracts of studies published until December 2016 through electronic databases (RISS, NDSL, KISS, DBpia) using the keywords "Balance or posture or postural control or postural stability", "Test or assessment or measurement or outcome measure or assessment tool or measurement tool", "Korean version", "Reliability" and "Validity". Regarding the questions considered suitable for the purpose of this study, consensus was reached after reading the full text. Selecting journals suitable for the purpose of the study, they were analyzed as data. RESULTS: The reviewers selected nine papers suitable for the purpose of this study, and Korean-version of the balance assessment tools, included the Berg Balance Scale (BBS), Activities-specific Balance Confidence (ABC) scale, Postural Assessment Scale for Stroke (PASS), Motor Assessment Scale (MAS), Trunk Impairment Scale (TIS), Falls Efficacy Scale (FES), Tinetti-Balance scale, Fullerton Advanced Balance (FAB) scale, and Function In Sitting Test (FIST). Our study showed that the reliability and validity of the Korean-version of the balance assessment tools were high. CONCLUSION: The Korean-version of the balance assessment tools with high reliability and validity would enable physical therapists to make a more accurate evaluation of balance.

• YAKHAK HOEJI
• /
• v.57 no.4
• /
• pp.272-281
• /
• 2013

In this study, we developed and validated the HPLC method using the isolated components from Erycibae caulis. Their structures were elucidated by spectroscopic methods including UV, $^1H$-NMR, $^{13}C$-NMR, FAB-Mass and ESI-Mass as Compound 1 (crypto-chlorogenic acid), Compound 2 (scopolin), Compound 3 (neochlorogenic acid) and Compound 4 (3,4-di-O-caffeoylquinic acid). Major three compounds and scopoletin were decided as representative components of Erycibae caulis. We established HPLC analytical method by using the representative components and 20 commercial samples which were collected considering to various cultivated area. The HPLC fingerprinting was successfully achieved with an AKZO NOBEL Kromasil 100-5C18 column. The mobile phase consisted of 0.5% acetic acid in water (A) and methanol (B) using gradient method of 85(A) to 50(A) for 35min. The fingerprints of chromatograms were recorded at an optimized wavelength of 330 nm. This developed analytical method was validated with specificity, selectivity, accuracy and precision. And it is suggested that scopolin, scopoletin, neochlorogenic acid, 3,4-di-O-caffeoylquinic acid were more than 0.162%, 0.133%, 0.057%, 0.044%, respectively. In addition, principal component analysis (PCA) was performed on the analytical data of 20 different Erycibae caulis samples in order to classify samples collected from different regions. We hope that this assay can be readily utilized as quality control method for Erycibae caulis.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.278-291
• /
• 2008

For the semiconductor manufacturing processes, so many vacuum systems are needed with large power consumption for vacuum pumps. Semiconductor device manufacturing makers are concerned about the power consumption and have to address this because it is related with the environmental issues. So many solutions including the design and the control of them by vacuum pump manufacturers to reduce the power consumption of vacuum pump are proposed. However, how to use vacuum pumps by users and the conditions for vacuum pump to be used are also very important to reduce the power consumption. In this article, how to reduce the power consumption of vacuum pumps is explained briefly and what the impact of semiconductor technology trend on the power consumption is considered very briefly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.464-464
• /
• 2010

A few years ago, for maintaining high stability and production yield of production equipment in a semiconductor fab, on-line monitoring of wafers is required, so that semiconductor manufacturers are investigating a software based process controlling scheme known as virtual metrology (VM). As semiconductor technology develops, the cost of fabrication tool/facility has reached its budget limit, and reducing metrology cost can obviously help to keep semiconductor manufacturing cost. By virtue of prediction, VM enables wafer-level control (or even down to site level), reduces within-lot variability, and increases process capability, $C_{pk}$. In this research, we have practiced VM on $SiO_2$ etch rate with optical emission spectroscopy(OES) data acquired in-situ while the process parameters are simultaneously correlated. To build process model of $SiO_2$ via, we first performed a series of etch runs according to the statistically designed experiment, called design of experiments (DOE). OES data are automatically logged with etch rate, and some OES spectra that correlated with $SiO_2$ etch rate is selected. Once the feature of OES data is selected, the preprocessed OES spectra is then used for in-situ sensor based VM modeling. ICP-RIE using 葰.56MHz, manufactured by Plasmart, Ltd. is employed in this experiment, and single fiber-optic attached for in-situ OES data acquisition. Before applying statistical feature selection, empirical feature selection of OES data is initially performed in order not to fall in a statistical misleading, which causes from random noise or large variation of insignificantly correlated responses with process itself. The accuracy of the proposed VM is still need to be developed in order to successfully replace the existing metrology, but it is no doubt that VM can support engineering decision of "go or not go" in the consecutive processing step.