• Journal of the Korea Institute of Building Construction
• /
• v.1 no.2
• /
• pp.174-178
• /
• 2001

This study was performed to control the thermal crack of the mat footing slab in the multi-purposed buildings. In this study, we executed the mixing design of concrete to satisfy the workability and the quality according to the site conditions. And, we evaluated quantitatively about the possibility of thermal crack by using hydration heat analysis system. Finally, we proposed the optimal mixing conditions, curing methods and curing period which all factors are considered. As a result, the optimal mixing conditions were : W/B 41%, unit binder 375kgf/$\textrm{m}^3$, FA replacement ratio 20%. Lowest thermal stress was 22.0kgf/$\textrm{cm}^2$ and at that time thermal crack index was over 1.5, when the coefficient of thermal conductivity was lowest among the curing conditions. And, the total curing time was estimated at 6.7 days according to curing steps.

• Journal of Sensor Science and Technology
• /
• v.3 no.1
• /
• pp.46-53
• /
• 1994

In the following paper, the high frequency oscillation proximity sensor system, one of the sensor systems used in FA, is designed using CMOS. According to the proximity of metal objects, two differing amplitudes of sinusoidal waves are set, and by using rectifiers, dc voltages, which determine the constant current source circuit's output current levels, can be abstracted from these waves. To remove any disturbances in the dc voltage levels, a schmitt trigger is used. Some advantages of this CMOS high frequency oscillation proximity sensor are miniturization, light weight and low power disspation.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.310-314
• /
• 2008

This paper proposes a very novel method which makes it possible that state feedback controller can be designed for unknown dynamic system with measurable states. This novel method uses the support vector machines (SVM) with its function approximation property. It works together with RLS (Recursive least-squares) algorithm. The RLS algorithm is used for the identification of input-output relationship. A virtual state space representation is derived from the relationship and the SVM makes the relationship between actual states and virtual states. A state feedback controller can be designed based on the virtual system and the SVM makes the controller with actual states. The results of this paper can give many opportunities that the state feedback control can be applied for unknown dynamic systems.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1200-1202
• /
• 2001

A programmable dymanometer is prosed where the user can define the steady-state and inertial torque-speed characteristic of the load. Rotating machinert can be tested on this dynamometer to determine their transient and steady-state characteristics with a pratical load. The system uses proportional-integrtal(PI)controllers to control a three-phase induction motor using indirect field orientation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.8
• /
• pp.11-18
• /
• 1993

In a spread spectrum system, the bandwidth and period of spreading code is wide and long, respectively. So it is necessary to make the code acquisition time as short as possible. In particular, serial search code acquisition system requires optimum dwell time for fast acquisition. In this paper, code acquisition time is calculated by varying dwell time. Among them, minimum code acquisition time is chosen and then optimum dwell time can be obtained. Detection probability (P$_{D}$) and false alarm probability (P$_{FA}$) can be obtained by integrating chi-square pdf by numerical analysis. The results are compared with that of gaussian approximation method and then it is concluded gaussian approximation method is not suitable for obtaining optimum dwell time. Computer simulation supports theoretical results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.68.4-68
• /
• 2001

In the area of factory automation (FA), a lot of researches are being executed about intelligent system using network. Conventional industry controllers are implemented the connection with other controllers by using asynchronous serial communications. These methods of communication have an advantage of easy implementation but have disadvantages of lack of real-time characteristics needed in motion control, slow baud rate too low to exchange required data sufficiently and low integrity because of different communication protocol. Serial real-time communication system (SERCOS) provides international standard communication specifications (IEC 61491) for interfacing between control units and drives from different manufacturers, has real-time ...

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.131-139
• /
• 1995

In this study, small size stacker Crane for automatic ware house and interface circuit is designed and manufactured. IBM-PC is used as a controller. At 50kg$_{f}$ load, optimal motion velocity is 20 mm/min for X and Y axis and 12 mm/min for Z axis. Position fesolution is 0.005 mm and repeatability is .+-. 0.025 mm. Through characteristic experiment, effectiveness of the designed and manufactured stacker crane. PC control program, and design of interface circuit and construction of control system are shown. From these results, the developed stacker crane can be apply to FMS(Flexible Manufacturing System) and FA(Factory Automation) of industrial field.d.

• 연구논문집
• /
• s.25
• /
• pp.121-128
• /
• 1995

The early day of manufacturing automation systems are NC machine tool Based automation, and now it become FA, DNC, FMC, FMS, CIM and IMS. Manufacturing Automation Technology is applied the increase of all industrial manufacturing competitve power. so the demand of this skill is repidly increase. This Technology can solve lack of manpower, decrease of productivity, and become weakened international competitive. But, automation rate of our country is 30-40%, because the level of domestic technology is low, so we need systemic research of manufacturing automation. The targets of this study are increase the data processing ability of CNC controller, and development of autonomous manufacturing system that can decision making between production module such as setup, manufacturing, inspection and transportation and part that object of manufacturing.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.1-5
• /
• 2003

The random pulse width modulation(RPWM) on the noise and vibration abatement in inverter-fed induction motor drive is presented. This paper describes a RPWM technique based on space vector PWM strategy for shaping the switching noise spectrum in such a way it can merge with the natural system noise. To verify the validity of the proposed RPWM scheme, the experiment based on the TMS320 C3l microprocessor was executed. Finally, the simulation and experimental results will be given to demonstrate the effectiveness of the proposed RPWM technique.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.677-682
• /
• 1998

A Single-phase Active Rectifier (SAR) [4-6] with high power factor capability is adopted to satisfy the international harmonic current standards such as IEC 1000-3-2. To minimize the input current distortion and to apply the control IC, such as FA5331, UC3854, ML4821 and so forth, the new adequate sensing circuits of the input voltage and current are proposed. There are tow methods applicable the SAR to inverter air-conditioner from the viewpoint of both efficiency and cost. The selecting methods of the passive components are presented for the two approaches. Using the determined components, the loss analyses are carried out. The prototype SAR circuits of these two approaches with 3kW power consumption are built and the operation and performance of the circuits with power factor correction capability are verified through the experimental results.