• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.191-196
• /
• 2004

This study proposed the analysis of mass position detection and modified stiffness due to the change of the mass and stiffness of structure by using the original and modified dynamic characteristics. The method is applied to examples of a cantilever and 3 degree of freedom by modifying the mass. The predicted detection of mass positions and magnitudes are in good agrement with these from the structural reanalysis using the modified mass.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.128-135
• /
• 1995

Theoretical and experimental drawing characteristics for the step drawbead are discussed. The drawbead restraining forces and strains by the varous drawing angles are measured experimentally. Also, during the blank holding process, the strain distributions of upper and lower skins of specimens are analysed by the 2-D rigid-plastic F.E.M And the drawbead restraining forces and strain distributions for the drawn specimens by the drawing length are obtained by experiment.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1990.10a
• /
• pp.3-8
• /
• 1990

A new finite element technology based on p-version of F.E.M. is discussed with reference to its potential for application to stress intensity factor computations. In linear elastic fracture mechanics, especially cracked cylindrical shells. It is shown that the p-version nutlet is far better suited for computing the stress intensity factors than the conventional h-version models with the help of three test problems. The main advantage of this technology is that the accuracy of approximation can be established without mesh refinement or the use of special procedures.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.134-137
• /
• 2015

본 연구에서는 다른 해법과 비교하여, 비선형 진동문제 선점법 적용성, 유효성을 확인하고, F.E.M 결과와의 응답 곡선에 비교하여, 비선형 동적응답문제의 선점법 적용성을 연구한다. 또한 축방향 관성은 세장비가 크기에 따라 그 영향이 어떻게 나타나는지 연구한다.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.972-978
• /
• 2005

The present study was carried out to investigate the blood markers of Jeju horses. The redcell cypes (blood groups) and blood protein types (biochemical polymorphisms) were tested from 102 Jeju horses by serological and electrophoretc procedure, and their phenotypes and gene frequencies were estimated. The blood group and biochemical polymorphism phenotypes observed with high frequency were $A^{af}\;(27.45\%$), $C^{a}\;(99.02\%$), $K^{-}\;(97.06\%$), $U^{a}\;(62.75\%$), $P^{b}\;(36.27\%$), $Q^{c}\;(47.06\%$), $D^{cgm/dghm}\;(13.73\%$), $D^{adn/cgm}\;(9.80\%$), $D^{ad/cgm}$\;(8.82\%$), $D^{dghm/dghm}(7.84\%$), $D^{cgm/cgm}(7.84\%$), $AL^{B}\;(48.04\%$), $GC^{F}\;(99.02\%$), $AlB^{K}\;(97.06\%$), $ES^{FI}\;(36.27\%$), $TF^{F2}\;(25.49\%$), $HB^{B1}\;(45.10\%$), and $PGD^{F}\;(86.27\%$) in Jeju horses, respectively. Alleles observed with high gene frequency were $A^{af}$ (0.3726), $A^{C}$ (0.2647), $C^{-}$ (0.5050), $K^{-}$ (0.9853), $U^{-}$ (0.6863), $P^{b}$ (0.4657), $Q^{c}$ (0.5294), $D^{cgm}$ (0.3039), $HB^{B1}$(0.6863), $PGD^{F}$ (0.9265), $AL^{B}$ (0.6912), $ALB^{K}$ (0.9852), $GC^{F}$ (0.9950), $ES^{I}$ (0.5000) and $TF^{F2}$ (0.4950) in Jeju horses, and sfecific alleles, $D^{cgm(f)}$ (0.0196), $HB^{A}$ (0.0147), $HB^{A2}$ (0.0196), $ES^{G}$ (0.0441), $ES^{H}$ (0.0098), $TF^{E}$TF'(0.0246), $TF^{H2}$ (0.0049) and $PGD^{D}$ (0.0098) were detected in Jeju horses. These preliminary results present basic information for detecting the genetic markers in Jeju horse. and developing a system for parentage verification and individuals identification in jeju horses.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.214-216
• /
• 1999

This paper discussed an optimal designs of 2 pole fan motors in refrigerator using a Niching Algorithm. We applied a Niching method to multi-objective optimal design of air gap construct. This Niching genetic algorithm is called "Restricted Competition Selection"(RCS) that is suitable for real world problem such as shape or structural optimization of electromagnetic device. The finite element method being used for nonlinear numerical characteristic analysis is provided exact solution in the system. Through this process is reduced the cogging torque ripple in air gap.

• Advances in aircraft and spacecraft science
• /
• v.6 no.1
• /
• pp.69-86
• /
• 2019

This paper discusses the use of the Digital Image Correlation (DIC) technique for the displacement and strain measurements of a wet lay-up composite wing. As opposed to classical strain gages, DIC allows to conduct full field strain analysis of simple to complex structural parts. In this work, wing-up bending tests and measurements of the composite wing of the Dardo Aspect by CFM Air are carried out through an ad-hoc test rig and the Q-400 DIC system by Dantec Dynamics. Also, the results are used to validate a finite element model of the structure under investigation.

• The Korean Journal of Ecology
• /
• v.15 no.2
• /
• pp.117-125
• /
• 1992

TWINSPAN(two-way indicator species analysis), DCCA(detrended canonical correspondence analysis) and polar ordination method wee used so as to analyze the the relation between forest vegetation and hibitat of mudungsan(1, 187m) located in kwangju area. Vegetationsurvey consulted 1:25, 000 topographical map, set up 41 quadrats and analyzed from April, 1990 to August, 1991. Forest vegetation of mudungsan was classifild to quercus acutissima community, fraxinus mandshurica community, quercus mongolica community, quercus serrata community, quercus dentata community, quercus variabilis community, and pinus densiflora community by TWINSPANmethod, and this almost coincide with the result of plar ordination. according to DCCA analysis, P. densiflora community was formed in xeric and low altitude region which soil nutrient was poor, compared with other communities. q. variabilis and q. acutissima community wee distributed in the region that low altitude and organic matter content was comparatively low, but q. acutissima community was formed in a damp region while q. variabilis community in a xeric region. q. mongolica and f. mandshurica formed the communities in a high altitude region, especially f. mandshurica cmmunity was distributed in a high humidity region. According to polar ordination analysis, the forest vegetation was classified to 7 communities by means of environmental gradient such as humidity, organic matter, ph, temperature, c.e.c and P2O5.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.99-105
• /
• 2000

One dimensional magneto-photonic crystal having structure of (A/B)$^{k/W}$(B/A)$^{k}$ , where M is a magnetic layer of highly Bi-substituted iron garnet, A and B are dielectric layers of $SiO_2$ and T $a_2$O$_{5/}$, and k is the stacking number of the dielectric layers, has been numerically analyzed as a function of the thickness (d$_{M}$) of M (1∼535 nm) and the stacking numer of k (5∼15). The transmittance, Faraday rotation, and figure of merit of the magneto-photonic crystal have been investigated both in the visible and infrared wavelengths. A factor of several and several tens greater Faraday rotation and figure of merit have been obtained compared to the single layer of M, at many localized modes. In the visible the maximum figure of merit of 0.15 was obtained ( = 720 nm) when k = 11 and d$_{M}$ = 375 nm with T : 0.54, $\theta$$_{F}$ = 8.13$^{\circ}$, which was a factor of 30 greater than that of single garnet layer. Much greater maximum figure of merit, 0.285, was obtained in the infrared ( = 1114 nm) when k = 11 and d$_{M}$ = 800 nm with T = 0.66, $\theta$$_{F}$ = 18$^{\circ}$, which was a factor of 100 greater than that of single garnet layer.

• Electrical & Electronic Materials
• /
• v.10 no.2
• /
• pp.113-118
• /
• 1997

For the amorphous F $e_{78}$ $B_{13}$S $i_{9-x}$G $e_{x}$ alloy, thermal analysis and measurements of the magnetic properties were carried out. As the content of Ge increased, the crystallization temperature was decreased and the Curie temperature was increased, and the tendencies were almost linear. The core loss of the amorphous alloy for x=1.7, field annealed at optimized condition, was 0.057 W/kg(l.0T, 60Hz), which was about 30% lower than that of no Ge added amorphous alloy (basic composition). Such a low core loss characteristics was thought to be caused by the lower coercive force and good squareness of B-H loop of the alloy.y.y.