• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.990-997
• /
• 1998

In this work, the $SiO_2$ films on the silicon substrate with different orientations were first prepared by the low temperature process using the ECR plasma diffusion as a function of microwave power and oxidation time. Before and after thermal treatment, the surface morphology, Si/O ratio from physicochemical properties, and the electrical properties of the oxide films were also investigated. The oxidation rate increased with microwave power, while surface morphology showed the nonuniform due to etching. The film quality, therefore, was lowered with increasing the defect by etching and the content of positive oxide ions in the oxide films from bulk by higher self-DC bias. The content of positive oxide ions in the oxide films with different Si orientations showed Si(100) < Si(111) < poly Si. The defects in $Si/SiO_2$ interface of $SiO_2$ film could be decreased by annealing, while $Q_{it}$ and $Q_f$ were independent of thermal treatment and the dependent on concentration of reactive oxide ions and self-DC bias of substrate. At microwave power of 300, and 400 W, the high quality $SiO_2$ film that had lower surface roughness and defect in $Si/SiO_2$ interface was obtained. The value of interface trap density, then, was ${\sim}9{\times}10^{10}cm^{-2}eV^{-1}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.53-67
• /
• 2017

This study was conducted to investigate the level of physical activity and identify factors influencing physical activity of first and second year nursing students. The participants were 234 female first and second year nursing students at one nursing college located in U city. Data were collected from September 5 to 15 in 2016 and analyzed by descriptive statistics, t-test, ANOVA, $Scheff{\breve{e}}$ test, Pearson's correlation coefficient, and stepwise multiple regression using SPSS/WIN 22.0. The average level of physical activity measured by the Korean version of the Godin-Shephard Liesure-Time Exercise Questionnaire was 9.09(range 0-80). According to the physical activity group classified by leisure score index, there were 25 students(10.7%) in the active group, 31 students (13.2%) in the moderately active group, and 178 students(76.1%) in the insufficiently active group. Factors influencing the level of physical activity were intention to participate in physical activity and habit to physical activity, which together explained 21.2% of the total variance in physical activity. Therefore, this study suggests that it is necessary to develop and apply a physical activity program enhancing intention and habit to physical activity for first and second year nursing students.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.677-686
• /
• 2016

A thermal power plant is the first CFBC (Circulating Fluidized Bed Combustion) power plant consisting of 2 boilers-1 turbine. The optimal height of a stack needs to be approximately 156 meters in the case of this thermal power plant; however, the thermal power plant sites satisfy a function and reduce the construction cost by using mountains in the sites after cutting the ground and locating an integrated office and chimney at an altitude of 70 meters thereby lowering the height of the stack to 86 meters. In addition, the integrated office, which has a combined stack style with a unique design, is constructed by connecting with 2 stacks and disposing the office and an observatory in the space between them. Therefore, this study examined the design concept that fulfils the structural, functional, and aesthetic factors, harmoniously by joining the integrated office and the stack, which are disparate, and investigated special construction methods (Slip Form, Steel Inner Flue & Lift-up) through which heterogeneous architectures are structurally, functionally, and aesthetically constructed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.107-119
• /
• 2016

This research was explored the effects of the application of the team-based classes on the self-directed learning, the academic self-efficacy, and the level of learning satisfaction of the nursing students. Study subjects are 104 nursing students from one university from G region. The data were analyzed by t-test, one-way ANOVA, paired t-test, Pearson's correlation coefficients. With regard to the differences between the levels of the learning satisfaction, the differences were shown (t=4.410, p<.05). Regarding the self-directed learning, it rose to the average of 3.50 points after the application of the team-based learning from the average of 3.39 points. It showed a difference (t=-2.083, p=<.05). And the academic self-efficacy rose to 3.65 points from the 3.12 points after the application of the self-based learning. And it showed a difference (t=-14.175, p=<.001). The level of the learning satisfaction was shown to be over the middle with the average of 3.73 points. And the self-directed learning after the application of the team-based learning showed an academic self-efficacy (r=.512, p<.001), a level of the learning satisfaction (r=.421, p<.001), and a positive relationship. It was proven that the team-based learning can cultivate the capabilities for effectively solving the clinical problems.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.3
• /
• pp.235-243
• /
• 2004

Illite has been known to adsorb Cs preferentially to other alkali cations, especially at lower Cs concentration due to the frayed edge site. This frayed edge site was only verified by isotherm experiments, but not by other analytical methods. To investigate the Cs sorption properties on the surface of illite, artificially weathered illite with increasing frayed edge sites was reacted with Cs at different solution concentrations. The illite was weathered f3r 1 hour, 2 days, 14 days in 0.001 M HCl solution. With increasing reaction time, increasing amount of K in solution was observed, indicating formation of frayed edges by weathering, which was also verified by XRD, SEM, and TEM analysis. Original and weathered illites were converted to the homoionic Na form and reacted with $10^{-3}$ / ～ $10^{-7}$ M CsCl solutions for 24 hour. The aspect of Cs sorption was clearly distinguished around $10^{-5}$ M Cs concentration. The relative Cs amount sorbed on illite at low concentration (<10$^{-5}$ M) was higher than high concentration and increased with decreasing Cs concentration. In general, the amount of sorbed Cs increases with increasing weathering time and this trend is more noticeable at lower concentration while not much differentiated with weathering time at high concentration. These results indicate that the selective Cs sorption site exists in illite at low concentration, known as frayed edge site, and the number of those sites increases with weathering time.

• The Korean Journal of Malacology
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2003

The present study was performed to describe the influence of water temperature and salinity on the filtration rates of the short-necked clam, Ruditapes philippinarum. The clams were collected at tidal flat near Yeosu city, Cheollanamdo, Korea, from July 2001 to August 2001. Diatoms, Phaeodactylum tricornutum (KMCC B-128), were indoor-cultured by f/2 medium, and were used to measure the filtration rate of the clams. Filtration rates of the clams were measured by indirect method. Cell concentrations of food organisms were determined by direct counting cells using the hemacytometer under the light microscope. The filtration rate of the clams increased with temperatures up to the optimum temperature, circa 25$^{\circ}C$. Above this optimum temperature, the filtration rate decreased drastically. Also the filtration rate of the clams increased with salinity up to 35 psu. The maximal filtration rates of the clams were recorded at 20-25$^{\circ}C$, similar to be known as the optimal temperature for their growth, and 25-35 psu, respectively. The minimal filtration rates of the clams were recorded at 5$^{\circ}C$ and 15 psu. At the similar temperature and salinity, the filtration rate of the younger clams was higher than that of the older ones. Thermal coefficient, Q$_{10}$ values at low temperature range were much higher than those at high temperature range. These results indicate the short-necked clam is more sensitive in cold water. As they grow up, they become more stronger against their ambient environmental changes, such as thermal-shock, salinity changes.

• Journal of dental hygiene science
• /
• v.10 no.2
• /
• pp.101-107
• /
• 2010

The purpose of this study was to analysis know the important oral environmental factors which affect halitosis components of the adult in order to provide basic data for halitosis prevention and establish a device to eliminate halitosis efficiently. The 97 adults who visited at the Dental Clinic in Metropolis (M=68, F=30) participated in this study that performed from March in 2009 to in 2010. The obtained results through items as caries status, periodontal status, salivary flow, the viscosity, pH, Snyder test, plaque deposit, tongue plaque and halitosis check were as followings. The average shame of halitosis components appeared at hydrogen sulfide 36.71 ppb methyl mercaptan 31.46ppb dimethyl sulfide 54.33 ppb and Ammonia 22.60 ppm. The normality and the detection comparative result dimethyl sulfide above reverse appeared highly at 46.9%, ammonia appeared highly at 52%. According to the Hydrogen sulfide level was a high relationship among age, CPI, tongue coat status, DMFT index which were statistically significant (p<0.05). According to the quantity of hydrogen sulfide level there was relationship where tongue coat status Saliva flow rate considers statistically(p<0.05). The quantity of methyl mercaptan level there was relationship where Dimethyl sulfide level, tongue coat status, Saliva flow rate considers statistically(p<0.05). The quantity of Dimethyl sulfide level there was relationship where Hydrogen sulfide level, ammonia level, tongue coat status, Saliva pH and Saliva flow rate considers statistically(p<0.05). Ammonia level there was relationship where Methyl mercaptan level, CPI, and Saliva flow rate considers statistically(p<0.05).

• Journal of the Korean earth science society
• /
• v.26 no.1
• /
• pp.41-57
• /
• 2005

The purpose of the study is to develop a educational data in order for students to perform geologic field survey effectively by themselves. A area around the Duta Mountain is selected. which is located at the southeastern part of Eumsung sedimentary basin because various rock types and geologic structures are well shown in this area and also it is convenient to reach there. Thirteen stops for observation are chosen m a route f3r exercising field geologic investigation. Data for field research are given and described in detail from each stop for observation. To do this, students make their own route map using general or digital geographic map and aerial photo is added to know relationship between large-scale structure and different rock types regionally. Moreover, it is designed to minimize conflict factors that may be experienced from the real field survey by showing outcrop photographs and polarizing photomicrographs of rut samples related to each stop and geologic structures. The attitude of students is investigated with the data of field geologic survey for students of an Earth Science class in the College of Education in Chungbuk National University. The results indicate that the educational data for geologic field survey brought positive changes that greatly help students perform field survey in definitive side, especially formation of absolute concepts on earth science.

• Journal of Aquaculture
• /
• v.9 no.2
• /
• pp.125-132
• /
• 1996

A study was carried out to test sex ratio of the progeny that were induced by the artificial fertilization between normal female and gynogenetic diploid eggs and sex-reversed gynogenetic diploid male sperm. Sex reversed gynogenetic diploid males were produced successfully in gynogenetic diploid female by immersion treatment with $17{\alpha}$-methyltestosterone at the concentration of 10 pub from $13.5{\pm}0.22$ mm to $57.6{\pm}5.1$ mm in total length. In $F_1$ progeny test, matings between normal females and sex-reversed gynogenetic males were not produced all female, but matings between gynogenetic diploid females and sex-reversed gynogenetic males were produced all female populations in six out of eight groups and two lots produced $96.9\%$ and $95\%$ female. These data showed that all-female populations were produced by crossing between gynogenetic diploid female and sex reversed gynogenetic diploid male.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1179-1185
• /
• 2011

Cold and hot-rolled carbon steel sheets are commonly used in railroad cars or commercial vehicles such as the automobile. The sheets used in these applications are mainly fabricated by spot welding, which is a type of electric resistance welding. However, the fatigue strength of a spot-welded joint is lower than that of the base metal because of high stress concentration at the nugget edge of the spot-welded part. In particular, the fatigue strength of the joint is influenced by not only geometrical and mechanical factors but also the welding conditions for the spot-welded joint. Therefore, there is a need for establishing a reasonable criterion for a long-life design for spot-welded structures. In this thesis, ${\Delta}P-N_f$ relation curves have been used to determine a long-life fatigue-design criterion for thin-sheet structures. However, as these curves vary under the influence of welding conditions, mechanical conditions, geometrical factors, etc. It is very difficult to systematically determine a fatigue-design criterion on the basis of these curves. Therefore, in order to eliminate such problems, the welding residual stresses generated during welding and the stress distributions around the weld generated by external forces were numerically and experimentally analyzed on the basis of the results, reassessed fatigue strength of gas welded joints.