• Resources Recycling
• /
• v.22 no.4
• /
• pp.3-11
• /
• 2013

The recovery of molybdenum and vanadium from acid leaching solutions of spent catalysts using solvent extraction has been investigated. Among various acid leaching solutions, sulfuric acid solution is found to be adequate for the recovery of these two metals. The extraction and stripping behavior of the two metals in the absence and presence of other impurity metals by various types of extractants such as cationic, solvating, amine and a mixture of cationic and solvating extractants was discussed. Each type of extractants has advantage and disadvantage in terms of the possibility of separation and of forming a third phase. Among the various types of extractants, a mixture of cationic and solvating extractants seems to be the most promising extractant system for the separation of Mo and V from the acid leaching solutions of spent catalysts.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2022

The smelting reduction of spent lithium-ion batteries results in metallic alloys of cobalt, nickel, and copper. To develop a process to separate the metallic alloys, leaching of the metallic mixtures of these three metals with H₂SO₄ solution containing 3% H₂O₂ dissolved all the cobalt and nickel, together with 9.6% of the copper. Cyanex 301 selectively extracted Cu(II) from the leaching solution, and copper ions were completely stripped with 30% aqua regia. Selective extraction of Co(II) from a Cu(II)-free raffinate was possible using the ionic liquid ALi-SCN. Three-stage cross-current stripping of the loaded ALi-SCN by a 15% NH₃ solution resulted in the complete stripping of Co(II). A process was proposed to separate the three metal ions from the sulfuric acid leaching solutions of metallic mixtures by employing solvent extraction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1350-1357
• /
• 2003

This research was aimed to establish the standard extraction and analytical procedures for examining the chromophoric substance in madder root with the ultimate goal of identifying the dyes in badly faded textiles of archaeological origin. The separation temperature of gas chromatography, pH and other extraction conditions were tested. The results were as follows: The suitable separation temperature for the GC cappillary column was 50∼305$^{\circ}C$, and methanol was a good GC solvent for both standard alizarin and madder extraction. The best extraction of madder was achieved by 90 min soaking in room temperature followed by filtration and the actual heat extraction procedure. The best pH for extracting alizarin was pH 3 and above pH 5 alizarin was not detectible. Only alizarin and no purpurin was found in the extraction of the currently used madder plant.

• YAKHAK HOEJI
• /
• v.37 no.2
• /
• pp.119-123
• /
• 1993

A spectrophotomertic method is proposed for the determination of antihistamines. The method is based on solvent extraction of the ion pair formed between antihistamines and colored picric acid into chloroform. The binding state of antihistamines-picric acid complexes were presumed by IR and $^{1}$H-NMR spectra as intermolecular hydrogen bonding. This method was applicable to the determination of antihistamines in the pharamaceutical preparations.

• Korean Journal of Plant Resources
• /
• v.11 no.1
• /
• pp.60-63
• /
• 1998

For the purposed of improving the utilization of natural chemical pigment, carthamin, of Carthamus tinctorius, the effective extraction methods on this compound were pursued in the present study. The best solvent for the extraction was found to be the 1 %(v/v) NaOH solution, at 25 hours. In addition, more carthamin was extracted flowers from main stem than fromb-ranches . The carthamin content of Korean local safflower was shown to be higher than that of Japanese variety used for medicinal uses.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.103-107
• /
• 2020

The purpose of this study is to resource calcium ions contained in most industrial by-products, and confirm the characteristics of calcium ions by extraction and separation conditions. Calcium oxide was used as a calcium extraction source, and hydrochloric acid as an extraction solvent, and the extraction amount according to the concentration of the extraction solvent and the pH dependent characteristics of the extract were analyzed. As the extractant concentration increased, the extracted amount increased while the pH for the extraction was kept constant. In order to separate extracted calcium ions, an acid-basic solution was injected and the formation of precipitates and also the form of precipitates were analyzed. When the sulfuric acid and sodium hydroxide solution of acid and basic substances were injected into the calcium extract, precipitates were formed and separated into CaSO₄ and Ca(OH)₂ forms.

• Journal of Korea Soil Environment Society
• /
• v.5 no.2
• /
• pp.45-53
• /
• 2000

Two extraction methods for total petroleum hydrocarbon (TPH) from contaminated soil were evaluated. The soil used for this study was sandy loam. Diesel oil was selected as representative petroleum hydrocarbons and was spiked at 100, 10,000, 50,000mg TPH/kg dry soil. Percentage recovery of TPH by shaking method was higher compared to Soxhlet extraction. At extraction time of 2 hours and sample to solvent ratio of 1 : 5, the highest percentage recovery was obtained. In this condition, percentage recovery of TPH in soil contaminated with 100mg/kg and 50,000mg/kg as TPH was 95.9% and 95.5%, respectively The volume of solvent lost by volatilization in shaking method was relatively small compared to Soxhlet extraction.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.2
• /
• pp.103-110
• /
• 2011

This study was performed to enhance anticancer activities of Lithospermum erythrorhizon by eluting high amount of shikonin through ultra high pressure process. Extraction yield was increased up to 5~10% by ultra high pressure process, compare to the normal extraction processes such as water solvent extraction, 70% ethyl alcohol solvent extraction. The cytotoxicity of the extracts ($1.0{\mu}g/m{\ell}$) from ultra high pressure process was showed the lowest cytotoxicity 13.4% for human lung cell (HEL299). The anticancer activities showed 80~85% by adding $1.0{\mu}g/m{\ell}$ of the extracts from ultra high pressure process in several cancer cell lines such as AGS, Hep3B, MCF-7 and HeLa cells. Among them, MCF-7 cell of the endocrine system was highest inhibited than other cells. The anticancer activities of the extracts from ultra high pressure extraction process showed 10~15%, which was higher than the extracts from normal extraction processes. From HPLC analysis of the extracts, the contents of shikonin in the extracts from ultra high pressure process was 11.42% (w/w), which was 20% higher than others. This results indicate that ultra high pressure process could increase the extraction yield of shikonin and other contents, which resulted in higher anticancer activities.

• Applied Biological Chemistry
• /
• v.36 no.4
• /
• pp.249-254
• /
• 1993

The dried cinnamon was extracted with water and 70% ethanol and studied for the several extraction conditions of temperature, time, solvent addition ratio and number of extraction on mineral components and physical properties of the extracts. Mineral components significantly increased as the extraction temperature increased. More than 8 hours of extraction showed a little improving while solvent ratio (V/W) up to 60 times (V/W) significantly increased the mineral components, particularly Cu, Zn, Fe, Na in water extracts and Fe, Mn, K in 70% ethanol extracts. Absorbance at 285 mm decreased as the temperature raised up to the range of $60{\sim}80^{\circ}C$. The Hunter a-value was much affected with extraction conditions and L-value and transmittance were changed similarily while pH was little changed.

• Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.159-165
• /
• 2014

In this study, Krill Eupausia superba oil was extracted using different solvents and supercritical carbon dioxide (SC-$CO_2$). During SC-$CO_2$ extraction, the pressure was set at 40 MPa and temperatures ranged from $40^{\circ}C$ to $55^{\circ}C$. We examined the differences in volatile compounds and safety profiles among extraction methods. Volatile compounds were determined using the thermal desorption system integrated with gas chromatography-mass spectrometry (GC-MS). Heavy metal content was analyzed by inductively coupled plasma mass spectrometry (ICP-MS). According to our results 10 volatile compounds were identified in krill sample. After SC-$CO_2$ extraction of oil, the concentrations of volatile compounds decreased, but increased after solvent extraction. In krill, heavy metal concentrations remained within the permissible limit. Moreover, Zn and Fe which have health benefits were detected at high concentrations. During a 90 days storage period at different temperatures, microbial activity was found to be lowest in SC-$CO_2$ extracted residues. Thus, the quality of krill oil and the residues obtained using SC-$CO_2$ extraction was higher and the oil was safer than those obtained using conventional solvent extraction. These results can be applied to the food industry to maintain high quality krill products.