• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.447-455
• /
• 2013

Hemicellulose extract obtained by pre-pulping extraction of woodchips, is very diluted acidic in nature. The major component responsible for this weak acidity is acetic acid, present in levels up to 5~10 g/L. Here, we report an exploratory study on the extract upgrading by reactive solvent extraction of acetic acid as well as ASPEN simulation. In this study, liquid-liquid equilibria for the ternary systems (water + acetic acid + ethyl acetate) were measured at the temperature of 298.15 K and 10 (pH = 2.02), 5 (pH = 2.17), and 1 (pH = 2.48) percent of acetic acid samples were used to carry out liquid-liquid extraction studies using ethyl acetate. In a one-stage batch experiment, 96.0% of acetic acid could be extracted for the solvent when the ratio of organic-to-aqueous phases is 4:1. For simulation results, they were used to estimate the interaction parameters between each of the three compounds of the systems studied for the NRTL and UNIQUAC models. The estimated interaction parameters were successfully used to predict the equilibrium compositions by the two models.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.219-229
• /
• 2005

The analytical methods for dioxins in water sample from wastewater to tap water were reviewed. For extraction method, liquid-liquid extraction (LLE) has been widely used, however, this process needs too much time and man power. New approach including solid phase extraction (SPE) is now applicable to large volume of water sample with high extraction efficiency. Column clean up in classical analytical methods were very complex and time consuming procedures during decade. Modifications were tried to decrease solvent and reagents volume. Moreover, use of column connection method has been demonstrated in the environmental matrices. Instrumental configurations also have been improved, in which GC/MS/MS with large volume injection approach can analyze picogram levels. Absolute sensitivities of HRMS increased compared to old versions of double focusing sector type mass spectrometers. Based on these analytical evolutions during last 10 years, we tried to optimize the analytical method for dioxins in water sample from sample extraction to instrumental analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.123-144
• /
• 2014

Wireless sensor networks are generally deployed for specific applications to accomplish certain objectives over a period of time. To fulfill these objectives, it is crucial that the sensor network continues to function for a long time, even if some of its nodes become faulty. Energy efficiency and fault tolerance are undoubtedly the most crucial requirements for the design of an information extraction protocol for any sensor network application. However, most existing software agent based information extraction protocols are incapable of satisfying these requirements because of static agent itineraries and large agent sizes. This paper proposes an Information Extraction protocol based on Multiple software Agents with Dynamic Itineraries (IEMADI), where multiple software agents are dispatched in parallel to perform tasks based on the query assigned to them. IEMADI decides the itinerary for an agent dynamically at each hop using local information. Through mathematical analysis and simulation, we compare the performance of IEMADI with a well known static itinerary based protocol with respect to energy consumption and response time. The results show that IEMADI provides better performance than the static itinerary based protocols.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.323-327
• /
• 2000

Microwave-assisted process (2,450MHz), which is known as a more environmental-friendly process with economic advantages than the current extraction methods, was investigated to pre-establish the extraction conditions for soluble ginseng components used for the processing of ginseng products. The extractions of soluble ginseng components showed optimum conditions, such as 60 mesh in particle size, 1 : 10 (g/mL) in the sample to solvent ratio, and less than 100 watts in energy efficiency. Under these conditions using along with 60% ethanol for 5 min, the overall yield of ginseng extracts was about 83%. Most soluble components including saponins were extracted by repeating five times of microwave-assisted extraction.

• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.101-106
• /
• 2011

The separation of germanium and gallium ion with metal oxide was introduced into the development of $^{68}Ge/^{68}Ga$ generator. Germanium and gallium within mixed solution were respectively separated by using a liquid-liquid extraction and a column chromatographic method. The separation of Ge within high concentrated hydrochloric and sulfuric acid was conducted by the extraction to $CCl_4$ and the back-extraction to 0.05 M HCl. An optimum condition of the extraction by $CCl_4$ was in 5~7 M HCl and efficiency was around 80%. The gallium was selectively separated by using $Al_2O_3$ among metal oxides as sorbents from the mixed solution in 0.04~0.10 M HCl condition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.171-190
• /
• 2023

This study aims to develop algorithms for automatic extraction landmarks from the lower body of women aged 20-54 using the Grasshopper programming language, based on 3D scan data in the 8th SizeKorea dataset. First, 11 landmarks were defined using the morphological features of 3D body surfaces and clothing applications, from which automatic landmark extraction algorithms were developed. To verify the accuracy of the algorithm, this study developed an additional algorithm that could automatically measure 16 items, and algorithm-derived measurements and SizeKorea measurements were compared using paired t-test analysis. The statistical differences between the scan-derived measurements and the SizeKorea measurements were compared, with an allowable tolerance of ISO 20685-1:2018. This study found that the algorithm successfully identified most items except for the crotch point and gluteal fold point. In the case of landmarks with significant differences, the algorithms were modified. This study was significant because scan editing, landmark search, and measurement extraction were successfully performed in one interface, and the developed algorithm has a high efficiency and strong adaptability.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.48 no.2
• /
• pp.86-97
• /
• 2024

Alkaline- or salt-assisted extractions have been widely used to extract edible insect proteins, however, there is a need for extraction techniques that balance cost-efficient production as well as preserving the protein properties. Mealworm proteins (Tenebrio molitor larvae) were extracted using three different extraction methods-alkali (AMP), salt (SMP), and water (WMP)-and then physicochemical and techno-functional properties were examined. AMP had high yield, protein, and amino acid contents, whereas WMP had high moisture, ash, and fat contents. SDS-PAGE showed a wide range of molecular weights in WMP whereas mostly low molecular weights were observed in AMP and SMP. AMP had poor protein solubilities compared to SMP and WMP across all pHs. AMP had enhanced water-holding capacity and emulsion stability, whereas WMP had improved oil-holding capacity and foaming properties. WMP formed a gel with and without the transglutaminase. The physicochemical and techno-functional properties demonstrated that water-soluble mealworm protein was superior to alkali-and salt-soluble mealworm proteins. Considering the cost efficiency and minimal impact on the environment as well, a cold press juicer could be utilized for mass production of mealworm protein compared to the conventional methods of protein extraction using alkali and salt.

• Korean Journal of Materials Research
• /
• v.15 no.10
• /
• pp.626-631
• /
• 2005

GaN-related compound semiconductors were grown on the corrugated interface substrate using a metalorganic chemical vapor deposition system to increase the optical power of white LEDs. The patterning of substrate for enhancing the extraction efficiency was processed using an inductively coupled plasma reactive ion etching system and the surface morphology of the etched sapphire wafer and that of the non-etched surface were investigated using an atomic force microscope. The structural and optical properties of GaN grown on the corrugated interface substrate were characterized by a high-resolution x-ray diffraction, transmission electron microscopy, atomic force microscope and photoluminescence. The roughness of the etched sapphire wafer was higher than that of the non-etched one. The surface of III-nitride films grown on the hemispherically patterned wafer showed the nano-sized pin-holes that were not grown partially. In this case, the leakage current of the LED chip at the reverse bias was abruptly increased. The reason is that the hemispherically patterned region doesn't have (0001) plane that is favor for GaN growth. The lateral growth of the GaN layer grown on (0001) plane located in between the patterns was enhanced by raising the growth temperature ana lowering the reactor pressure resulting in the smooth surface over the patterned region. The crystal quality of GaN on the patterned substrate was also similar with that of GaN on the conventional substrate and no defect was detected in the interface. The optical power of the LED on the patterned substrate was $14\%$ higher than that on the conventional substrate due to the increased extraction efficiency.

• Journal of Society of Preventive Korean Medicine
• /
• v.17 no.3
• /
• pp.177-185
• /
• 2013

Objective : Eucommiae Cortex is bark of Eucommia ulmoides Oliver, a deciduous tree native to China. Today, teas or herbal drugs made from E. ulmoides leaves are widely consumed as a healthy food especially in Eastern Asia including Japan, China and Korea. This study was aimed to verify the extraction efficiency of bioactive compounds from Eucommiae Cortex depending on characteristics of decoction water. Method : Six types of decoction water with various origin were prepared and the contents of minerals in water were analyzed by ICP-AES and ICP-MS. The contents of extracted bioactive compounds were analyzed by HPLC and the relationship between mineral contents and extracted bioactive compounds in the decoction water were analysed by multiple factor analysis. The decoction waters could be classified in three groups by hierarchical cluster analysis. Result : Extracted amounts of compounds in Eucommiae Cortex showed a positive relationship with Na, Si, K concentration in decoction water, while a negative relationship with Ca, Mg concentration. Conclusion : The study proved that the minerals in water influenced the extraction efficiency of bioactive compounds from Eucommiae Cortex.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.63-73
• /
• 2016

With the purpose of concentrating the magnesium from seawater, in this study, we have conducted experiments to precipitate the magnesium using three precipitants (NaOH, cement kiln dust, and paper sludge ash), and then extract it using sulfuric acid. Results show that the precipitation and extraction performance does not depend so significantly on the kind of precipitant: for all the precipitants used, the precipitation efficiency is measured almost 100% and the extraction efficiency is in the short range of 77 - 89%. The magnesium concentration in the extract is measured 4975 - 5775 mg/L, implying that the magnesium in seawater should be 3.8 - 4.4 times concentrated through the precipitation and extraction reactions. The reaction efficiency of the industrial by-product used as a precipitant in this study is almost 100% similar to those of the other existing expensive precipitants.