• 한국식품영양학회지
• /
• 제30권2호
• /
• pp.319-325
• /
• 2017

본 연구에서는 상업적으로 가장 많이 쓰는 커피 추출기인 2단계 퍼콜레이터를 사용하여 인스턴트커피를 제조하기 위한 커피추출조건을 최적화하였다. 반응표면분석을 위한 수학적 모델식을 구하기 위해 중심합성계획법이 사용되었고, 구해진 모델식에서는 커피추출액의 추출 수율과 추출액의 전반적인 기호도가 3가지 요인(추출기의 급수온도, 추출배수, 추출시간)의 2차식으로 표현되었다. 반응표면분석의 결과를 바탕으로 40% 이상의 수율을 보이는 범위에서, 추출수율과 전반적인 기호도를 최대로 하는 최적 커피 추출 조건은 급수온도 $163^{\circ}C$, 추출배수 4.3 및 추출시간 27분이었다. 이 결과는 산업에서 경쟁력 있는 인스턴트 커피 제조를 위한 커피 추출 조건에 대한 기초 자료를 제공한다.

• 한국토양동물학회지
• /
• 제5권2호
• /
• pp.63-70
• /
• 2000

영국의 고원지대 (Moorland)의 이탄토양 (blanket bog peat soil에 서식하는 애지렁이 정량조사를 위한 수분갈때기추출법의 효율에 미치는 수온, 물의 량, 추출시간의 복합적인 효과를 조사하였다. 이탄 토양에서 애지렁이 추출을 위한 최적조건은 물의 양과 초기 수온에 관계없이 표면수의 최종 온도는 35$^{\circ}C$이고, 추출시간은 6시간이었다. O'Connor의 방법 (최종 온도 40-45$^{\circ}C$,열의 점진적인 증가, 3시간 추출)은 비교적 늪은 온도와 짧은 추출시간으로 인해, 추출효율에 변이가 심하였다. 열을 가하지 않고 장시간 추출하는 방식은 열을 가하는 방식에 비해 추출효율이 현저히 낮았다.

• 생명과학회지
• /
• 제24권4호
• /
• pp.419-427
• /
• 2014

인진쑥(Artemisia capillaris Thunbl)의 항산화적 특성을 조사하기 위하여 반응표면분석법에 의하여 열수추출특성을 모니터링하여 최적 추출조건을 설정하였다. 총 페놀성화합물 함량에 대한 최적조건은 $94.50^{\circ}C$, 2.06 hr 및 시료에 대한 용매비 25.03 ml/g, 전자공여능에 대한 최적조건은 $91.82^{\circ}C$, 2.90 hr 및 20.88 ml/g으로 나타났고, 아질산염 소거능(pH 1.2)에 대한 최적조건은 $97.36^{\circ}C$, 2.75 hr 및 15.19 ml/g등으로 각각 나타났다. 각 변수에 대한 회귀식을 도출하여 인진쑥의 총 페놀성화합물 함량, 전자공여능 및 아질산염 소거능(pH 1.2)에 대한 최적 추출조건을 superimposing 한 결과, 추출온도 $90{\sim}95^{\circ}C$, 추출시간 2.5~3.5 hr 및 시료에 대한 용매비 17~24 ml/g의 범위로 각각 예측되었다.

• 한국식품과학회지
• /
• 제32권5호
• /
• pp.1022-1028
• /
• 2000

마이크로웨이브 추출방법과 환류냉각 추출방법을 비교한 결과, 물과 메탄올 및 에탄올 혼합용매로 추출한 경우 마이크로웨이브 추출 방법에 의하여 추출시간을 단축시키면서 환류냉각 추출방법에서와 같은 수준의 추출율과 총 폴리페놀 함량을 갖는 섬쑥부쟁이 추출물을 얻을 수 있었다. 마이크로웨이브 추출시 최적 마이크로웨이브 에너지는 $120{\sim}150$ W였고 추출시간의 경우 $4{\sim}8$분이 적당하였다. 추출에 사용한 용매들 가운데 에탄올, 메탄올보다 물 그리고 물과 에탄올 또는 메탄올 혼합용매를 사용한 추출물의 추출율, 총 폴리페놀 함량 및 전자공여 효과가 높은 것으로 나타났다.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.406-412
• /
• 1998

Such extraction conditions as the kinds of solvent, extracting temperature, extracting time, ratio of material to solvent and particle size of material, were studied to maximize the extraction of oleoresin from chipi. Larger amount of soluble solids were extracted from seeds with nonpolar solvents (hexane, pentane, ether) for extraction, because the seeds contained large amount of crude fats and monoterpene(limonene) volatile compounds. Larger amount of soluble solids were extracted from peel with polar solvents(methanol, ethanol) of extraction because of large amount of water soluble colors, sugars and oxygenated terpene bolatile compounds in the peel. The application of the solvents in intermediate polarity (dichloromethane, acetone) resulted in more effective extraction of soluble solid and volatile compounds. Expecially, dichloromethane was an excellent solvent in extraction of volatile compounds. In the concern of volatile compound recovery yield, the optimum extraction conditions, such as temperature, time, mixing ratio of material to dichloromethane and mean particle size, were $25^{\circ}C$, 10min, 1:10(w/v), 355~250${\mu}{\textrm}{m}$ for chopi peels and 3$0^{\circ}C$, 10min, 1:8(w/v), 355~250${\mu}{\textrm}{m}$ for chopi seeds, respectively.

• 한국식품조리과학회지
• /
• 제23권6호
• /
• pp.954-960
• /
• 2007

The study was designed to determine optimum extraction conditions, by the factorial design of 3 variables and 3 levels using an a RSM program. To determine the optimal conditions for the extraction of black tea with chamomile, the experimental design was applied. The independent factors were the extraction temperature ($60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$), extraction time (2 min, 4 min, 6 min), and chamomile addition (0.3%, 1.0%, 1.7%). By the RSM (response surface methodology) analysis of the black tea with chamomile extraction, we found that the extraction temperature greatly affected the extraction yield, brix, pH, and reducing sugar, caffeine, theobromine and theophillin contents. The optimum extraction time, temperature, and chamomile content were 4 min, $90^{\circ}C$, and $1.6{\sim}1.7%$, respectively.

• Food Science and Biotechnology
• /
• 제16권1호
• /
• pp.150-153
• /
• 2007

Hydrocarbons have been successfully used as a chemical marker in order to identify irradiated from non-irradiated foods. The method for determining hydrocarbons consists of extraction of fats, followed by separation of hydrocarbons by florisil column chromatography, and then identification of hydrocarbons by GC/MS. Currently, solvent extraction method for fats has certain limitations with regard to extraction time and solvent consumption. Commercial hams and sausage were irradiated at 0 and 5 kGy, and the efficiency of microwave-assisted extraction (MAE) and conventional solvent extraction (CSE) methods on the extraction of radiation-induced hydrocarbons from the meat products was compared. Significant levels of hydrocarbons, mainly composed of 1,7-hexadecadien, 1,7,10-hexadecatriene, and 6,9-heptadecadiene, were detected in the extracts from irradiated hams and sausages by both CSE and MAE methods. Both methods were acceptable in extracting hydrocarbons from samples, but MAE method required apparently reduced amounts of solvent from 150 (CSE) to 50 mL and reduced extraction time from 23 (CSE) to 5 min.

• Journal of Microbiology and Biotechnology
• /
• 제17권11호
• /
• pp.1880-1884
• /
• 2007

This study was conducted to find the optimum extraction condition of Gold-Thread for antibacterial activity against Streptococcus mutans using The evolutionary operation-factorial design technique. Higher antibacterial activity was achieved in a higher extraction temperature ($R^2=-0.79$) and in a longer extraction time ($R^2=-0.71$). Antibacterial activity was not affected by differentiation of the ethanol concentration in the extraction solvent ($R^2=-0.12$). The maximum antibacterial activity of clove against S. mutans determined by the EVOP-factorial technique was obtained at $80^{\circ}C$ extraction temperature, 26 h extraction time, and 50% ethanol concentration. The population of S. mutans decreased from 6.110 logCFU/ml in the initial set to 4.125 logCFU/ml in the third set.

• 한국식품영양과학회지
• /
• 제30권3호
• /
• pp.466-470
• /
• 2001

Response surface methodology was used for monitoring extraction conditions, based on quality properties of old pumpkin extracts. Hunter's color L value of extracts was maximized at 101℃, 2.6 hr and decreased gradually after maximum point. The polynomial equation for Hunter's color L value showed 10% of significance level and 0.8799 of R². Hunter's color a value was minimized at 117℃, 3.9 hr and R² of polynomial equation was 0.9852 within 1% significance level. Hunter's color b value and ΔE value increased as the extracting temperature and time increased. Extraction yield of old pumpkin was maximized at 110℃, 4 hr and increased in proportional to the extracting temperature and time, but decreased after 113℃ and 2 hr. Viscosity of pumpkin extracts were maximized at 120℃, nearly 3 hr. R² of polynomial equations for yield, viscosity and sugar content were 0.9532, 0.9812 and 0.8869, respectively. Optimum ranges of extraction conditions for quality properties of old pumpkin were 102∼109℃, 2.5∼3.5 hr, respectively. Predicted values at the optimum extraction condition agreed with experimental values.

• Journal of Ginseng Research
• /
• 제18권1호
• /
• pp.53-59
• /
• 1994

To develop the methodology of the quantitative analysis of saponin in ginseng milk, conditions of the saponin extraction were optimized using the fractional factorial design with 3 variables and 3 levels by a RSM computer program. The extraction of saponin increased with an increase in extraction temperature up to $90^{\circ}C$ and then decreased significantly at $100^{\circ}C$. Extraction time affected the saponin yield in a similar trend. On the other hand, decreasing cooling temperature increased the amount of the saponin extracted. Recovery yield of the saponin from ginseng milk varied from 70.0% to 92.9%. The optimum extraction temperature, time and cooling temperature determined by partial differentiation of the model equation were $86^{\circ}C$, 2.83 hrs and $4^{\circ}C$, respectively. Key words Ginseng milk, saponin, response surface methodology.