• Title/Summary/Keyword: Extracted Ratio

Search Result 1,404, Processing Time 0.029 seconds

Effect of the Base Ratio of Upland Soils on the Yield of Mungbean (밭토양의 염기비 차이가 녹두수량에 미치는 영향)

  • Kim, Jae-Chul;Ree, Dong-Woo;Park, Yeon-Kyu
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.31 no.3
    • /
    • pp.299-303
    • /
    • 1986
  • To provide useful information on the improving cultural practices of mungbean, investigations were made on Ca/Mg and (equation omitted) ratio in soil and plant grown under three fertilizer levels of N, P, K with different upland soils, using variety, Kyonggijaerae 5. Highly significant possitive correlations were observed between the soil extracted molar Ca/Mg ratio, (equation omitted) ratio at flowering time and yield, number of pods per plant, respectively. Soil-extracted Ca/Mg ratio at flowering time ranged from 1.9 to 6.4 and (equation omitted) ratio ranged from 0.17 to 0.33. Yield decreased rapidly as extracted soil Ca/Mg ratio became smaller than the ratio of 3.9, and yield was the highest the (equation omitted) ratio adjusted to 0.23 at flowering time. At harvesting time, Ca/Mg ratio in plant ranged from 1.4 to 4.3 and the yield decreased rapidly as Ca/Mg ratio in plant became smaller than 2.6. Yields, however, were not related to the soil-extracted Ca/Mg ratio interval from 3.9 to at least 6.4 in flowering time and Ca/Mg ratio in plant ranged from 2.6 to 4.3 at harvesting time.

  • PDF

The Basic Study on Wave Energy Conversion System(II) -Estimation on Extracted Wave Power of Wave Energy Conversion Device- (파력발전시스템에 관한 기초연구(II) -파력발전기의 흡수파력 추정-)

  • 김성근;박노식
    • Journal of Ocean Engineering and Technology
    • /
    • v.4 no.1
    • /
    • pp.43-48
    • /
    • 1990
  • The results of previous works on the wave energy conversion do not seem to be satisfactory due to irregularity, and the non-linear hydrodynamic effect which is inevitably featured due to the structural complexity of the ocean wave energy conversion device. These may cause the difficulty estimating the extracted wave power. In this paper a study on estimating the extracted wave power and its ratio. The present authors have developed another method estimating the extracted wave power using the three dimensional source distribution method, which was turned out to be an improved one. It has been observed that the present results may be used for the control of the wave energy conversion device and the optimal design has been derived from the several case studies.

  • PDF

Quality Characteristics of Extracted Coffee with Cold Water according to Water Quantity and Dilution Ratio (가수량 및 희석 비율을 달리하여 제조한 냉수 추출 커피의 품질 특성)

  • Jeong, Ji-Gyun;Cho, Yeon-Sook;Kwak, Eun-Jung
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.24 no.1
    • /
    • pp.109-115
    • /
    • 2014
  • This paper investigated the optimal conditions for coffee extraction and dilution by comparing differences in soluble compounds and sensory characteristics of coffee subjected to cold-water extraction according to water quantity and dilution ratio. For sample preparation, we extracted coffee for 3 to 10 hours by adding 400 mL, 600 mL, 1,000 mL and 1,800 mL of cold water ($20^{\circ}C$) to 100 g of ground coffee, resulting in 200 mL, 400 mL, 800 mL and 1,600 mL portions of extracted coffee, respectively. Following this, the 200 mL, 400 mL and 800 mL portions of extracted coffee were further diluted with 1,400 mL, 1,200 mL and 800 mL of cold water, resulting in ratios of coffee to cold water of 1:7, 1:3 and 1:1, respectively. The 1,600 mL of portion of extracted coffee was not diluted and used as a sample. Undiluted coffee showed the highest values for pH, acidity, reducing sugar, total soluble solids and total phenolic compounds among all sample coffees, whereas the highly diluted coffee with a high ratio of 1:7 showed the lowest values. In a descriptive test, odor, sourness, bitterness and body intensity were also the highest in undiluted coffee due to the overly extracted coffee compounds. Undiluted coffee showed the lowest preference in terms of aroma, aftertaste and balanced coffee taste. On the other hand, diluted coffee at a ratio of 1:7 showed the lowest values for odor, sourness, bitterness and body intensity. Diluted coffee at a ratio of 1:3 showed the highest values for sweetness and acidity and was the most preferred in terms of aroma, aftertaste and balance. As a result, our study concluded that the optimal conditions for extraction and dilution of coffee with cold water are a ratio of ground coffee to cold water of 1:6 (w/v), followed by further dilution of the coffee by cold water at a ratio of 1:3.

Effect of the Mixing Extraction of Perilla Seed and Peanut on Physicochemical Characteristics and Oxidative Stability of Perilla Oil (들께와 땅콩의 혼합 채유가 들기름의 이화학적 특성 및 산화안정성에 미치는 영향)

  • 권용주;김충기;오현화
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.28 no.6
    • /
    • pp.1212-1219
    • /
    • 1999
  • The oils were extracted from the mixture of roasted(for 20 min at 190oC) perilla seeds(RPS) and roasted (commercially) peanuts(RPN) by solvent extraction(SE) and mechanical expression(ME). The effects of mixing ratio on physicochemical characteristics and oxidative stability of their oils were investigated. Yields of both SE and ME oils were increased as the RPN ratio in the mixture increased. In all the SE and ME oils, the major fatty acids were oleic, linoleic and linolenic acid, and total saturated fatty acids increased gradually, but total unsaturated fatty acids decreased gradually as the RPN ratio in the mixture was increased. The specific gravity and refractive index of both SE and ME oils decreased as the RPN ratio in the mixture was increased. Acid value, saponification value and iodine value of SE oils decreased as the RPN ratio in the mixture increased, whereas acid value and iodine value of ME oils decreased and saponification value increased. The colors of ME oils were darker brownish than SE oils. The oxidative stability of SE oils was decreased as the RPN ratio in the mixture increased, whereas that of ME oils was increased. Sensory evaluation of all the oils extracted from the mixture with various mixing ratio showed significant differences in flavor, taste, color and overall acceptance(p<0.01). The oil extracted from the mixture of the mixing ratio of 8:2(RPS:RPN) showed slightly higher preference regardless of extraction method.

  • PDF

Comparison of Major Components of Sesame Oil Extracted from Korean and Chinese Sesames (한국산 및 중국산 참깨로부터 착유한 참기름의 주요성분 비교)

  • 서정희;김제란;이기동;권중호
    • Journal of Food Hygiene and Safety
    • /
    • v.11 no.3
    • /
    • pp.215-220
    • /
    • 1996
  • Korean and Chinese sesames were subjected to microscopic observation and instrumental determination of fatty acid composition and sesamolin/sesamin ratio to obtain basic data for discriminating each other. The overall appearance of both samples was differently observed by stereo microscope (X8). Fatty acid composition of sesame oils, extracted from both samples with different roasting degrees, showed a similar pattern although Chinese samples cointained about 6% higher content of stearic acid and 47% lower content of linolenic acid then Korean ones. The sesamolin/sesamin ratio was remarkably lower(.039) in Chinese samples than Korean (0.67∼0.72). showing a variation depending on producing districts. Roasting degrees of raw sesames little influenced their composition of fatty acid and sesamolin/sesamin ratio. Based on the above results, it is considered that the comparison between domestic and Chinese sesames in view of their stearic and linolenic acid contents and sesamolin/sesamin ratio might be one of the potential criteria in discriminating their production origins.

  • PDF

Development of a Software Program for the Automatic Calculation of the Pulp/Tooth Volume Ratio on the Cone-Beam Computed Tomography

  • Lee, Hoon-Ki;Lee, Jeong-Yun
    • Journal of Oral Medicine and Pain
    • /
    • v.41 no.3
    • /
    • pp.85-90
    • /
    • 2016
  • Purpose: The aim of this study was to develop an automated software to extract tooth and pulpal area from sectional cone-beam computed tomography (CBCT) images, which can guarantee more reproducible, objective and time-saving way to measure pulp/tooth volume ratio. Methods: The software program was developed using MATLAB (MathWorks). To determine the optimal threshold for the region of interest (ROI) extraction, user interface to adjust the threshold for extraction algorithm was added. Default threshold was determined after several trials to make the outline of extracted ROI fitting to the tooth and pulpal outlines. To test the effect of starting point location selected initially in the pulpal area on the final result, pulp/tooth volume ratio was calculated 5 times with different 5 starting points. Results: Navigation interface is composed of image loading, zoom-in, zoom-out, and move tool. ROI extraction process can be shown by check in the option box. Default threshold is adjusted for the extracted tooth area to cover whole tooth including dentin, cementum, and enamel. Of course, the result can be corrected, if necessary, by the examiner as well as by changing the threshold of density of hard tissue. Extracted tooth and pulp area are reconstructed three-dimensional (3D) and pulp/tooth volume ratio is calculated by voxel counting on reconstructed model. The difference between the pulp/tooth volume ratio results from the 5 different extraction starting points was not significant. Conclusions: In further studies based on a large-scale sample, the most proper threshold to present the most significant relationship between age and pulp/tooth volume ratio and the tooth correlated with age the most will be explored. If the software can be improved to use whole CBCT data set rather than just sectional images and to detect pulp canal in the original 3D images generated by CBCT software itself, it will be more promising in practical uses.

Structural time-varying damage detection using synchrosqueezing wavelet transform

  • Liu, Jing-Liang;Wang, Zuo-Cai;Ren, Wei-Xin;Li, Xing-Xin
    • Smart Structures and Systems
    • /
    • v.15 no.1
    • /
    • pp.119-133
    • /
    • 2015
  • This paper proposed a structural time-varying damage detection method by using synchrosqueezing wavelet transform. The instantaneous frequencies of a structure with time-varying damage are first extracted using the synchrosqueezing wavelet transform. Since the proposed synchrosqueezing wavelet transform is invertible, thus each individual component can be reconstructed and the modal participation factor ratio can be extracted based on the amplitude of the analytical signals of the reconstructed individual components. Then, the new time-varying damage index is defined based on the extracted instantaneous frequencies and modal participation factor ratio. Both free and forced vibrations of a classical Duffing nonlinear system and a simply supported beam structure with abrupt and linear time-varying damage are simulated. The proposed synchrosqueezing wavelet transform method can successfully extract the instantaneous frequencies of the damaged structures under free vibration or vibration due to earthquake excitation. The results also show that the defined time-varying damage index can effectively track structural time-varying damage.

A Study on the Typology of Agricultural Reservoir for Effective Safety Inspection Systems (효율적인 안전진단 체계 수립을 위한 농업용 저수지 유형화 연구)

  • Lee, Chang Beom;Jung, Nam Su;Park, Seong Ki;Jeon, Sang Ok
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.57 no.5
    • /
    • pp.89-99
    • /
    • 2015
  • In this research, 1,032 data of precise safety inspection from 2004 to 2013 are gathered and constructed for finding effective safety inspection systems. Items are extracted from constructed data and factors for typology are decided with statistical method such as principle component analysis and cluster analysis. For factor decision, we extruded independent characteristics such as morphological and geographical characteristic, and deleted items which can be expressed by combination of independent characteristics. Four factors such as total storage, watershed ratio, levee length ratio, and spillway length ratio are extracted in this process. In cluster analysis, levee length ratio is excluded because it is not separated as cluster. Finally nine types of agricultural reservoir are extruded by total storage, watershed ratio, and spillway length ratio with frequency analysis.

Prediction of Defibrillation Success of Ventricular Fibrillation ECG Signals using Time-Frequency Analysis (시-주파수 분석을 이용한 심실세동시 심전도 분석을 통한 제세동 예측에 관한 연구)

  • Sung, Hong-Mo;Shin, Jae-Woo;Lee, Hyun-Sook;Hwang, Sung-Ho;Yoon, Young-Ro
    • The Transactions of the Korean Institute of Electrical Engineers D
    • /
    • v.55 no.4
    • /
    • pp.181-188
    • /
    • 2006
  • The purpose of this study is to predict the defibrillation success of a ventricular Fibrillation ECG signal using time-frequency analysis. During CPR, coronary perfusion pressure and electrocardiogram were measured. Parameters extracted from time-frequency domain were served as predictor of resuscitation success. Time frequency distribution(TFD) of ECG signals was estimated from the smoothed pseudo Wigner-Ville distribution(SPWVD). Median frequency, peak frequency, 1/f slope, frequency band ratios$(2{\sim}4Hz,\;4{\sim}6Hz,\;6{\sim}8Hz,\;8{\sim}10Hz,\;10{\sim}12Hz,\;12{\sim}15Hz)$ were extracted from each TFD as function of time. Paired t-test was used to determine the differences in ROSC and non-ROSC groups. In the statistical results, we selected four significant parameters - median frequency, 1/f slope, $2{\sim}4Hz$ band ratio, $8{\sim}10Hz$ band ratio. We made an attempt to predict defibrillation success by combining features extracted from time frequency distribution. Independent t-test was used to determine the differences ROSC and non-ROSC groups. Consequently, we selected four significant parameters-median frequency, 1/f slope, $2{\sim}4Hz$ band ratio, $8{\sim}10Hz$ band ratio. The relationship between coronary perfusion pressure and ECG parameters was analyzed with linear regression analysis. R-square value was 55%. 1/f slope and $8{\sim}10Hz$ band ratio had the significant relationship with coronary perfusion pressure.

Image Retrieval using Spatial Information and Color Changing Ratio (공간정보와 색상변화율을 이용한 영상검색)

  • Kang, Ki-Hyun;Park, Yu-Sin;Yoon, Yong-In;Choi, Jong-Soo;Kim, Dong-Wook
    • Journal of Korea Multimedia Society
    • /
    • v.11 no.1
    • /
    • pp.23-33
    • /
    • 2008
  • In this paper, we propose a image retrieval algorithm using spatial information and color changing ratio. The proposed method extracts color regions from images by threshold $\tau$ to extract spatial information. During this process, we count extracted color regions and color changing, and these values are used to obtain color changing ratio. Image similarity between images is measured by extracted spatial information. Additively, color changing ratio makes images that has similar color changing ratio to be more higher retrieval rank. In our experiment using various natural images, we demonstrate a proposed method shows better performance than other common retrieval methods using color informations.

  • PDF