• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1994년도 추계학술대회논문집; 한국종합전시장, 18 Nov. 1994
• /
• pp.21-28
• /
• 1994

The forced vibration with the symmetric boundary condition in nonlinear structure is studied by utilizing the characteristic of the free vibration which have two modes with the similar natural frequency. Two linear modes exist to have no concern with the amplitude. It is found that the normal mode or elliptic orbit as the newly coupled modes is generated in accordance with changing the stability. It is also known that responses for forced vibration having the small external force and damping are near mode of free vibration and the stability for each response is determined according to the stability for each response is determined according to the stability in mode of free vibration. Finally the stability and bifurcation are analyzed in proportion to increment of external force and damping.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.110-116
• /
• 2015

This study investigates the whirling stability of a rotating shaft-disk system under parametric excitation using periodically varying torque. The equations of motion were derived using a lumped-mass model, and the Floquet method was employed to find the effects of torque fluctuation, internal and external damping, and rotational speed on whirling stability. Results indicated that the effect of torque fluctuation was considerable on the instability around resonance, but minimal on supercritical instability. Stability diagrams were sensitive to the parametric excitation frequency; critical torque decreased upon increasing excitation frequency, with faster response convergence or divergence. In addition, internal and external damping had a considerable effect on unstable regions, and reduced the effects of the parametric excitation frequency on critical torque and speed. Results obtained from the Floquet approach were in good agreement with those obtained by numerical integration, except for some cases with Floquet multipliers very close to unity.

• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.274-279
• /
• 2010

본 논문에서는 원 형상에 비해 20% 축소 설계된 수평 핀을 부착한 전투기의 외부 연료 탱크의 정적인 세로 안정성을 해석하고 투하궤적을 분석하였다. 얇은 에어포일의 공력 자료를 이용하여 연료 탱크의 정적 피칭 안정성을 해석한 결과는 풍동 실험 결과와 거의 일치하였다. 연료탱크의 6자유도 운동방정식에 대한 수치적인 모사에서 얻은 낙하 궤적을 실제 모델의 투하 실험 궤적과 비교 분석한 결과 투하 시 항공기의 자세가 연료 탱크의 수직 이동 궤적에는 영향을 미치지 않지만 수평 이동 궤적에는 상당한 영향을 미치게 됨을 알 수 있었다. 이와 같은 이론 해석 및 실험 결과의 분석을 통해 재설계 핀을 부착한 외부 연료 탱크를 비행 중 항공기로 부터 분리할 때 비행운용 규범을 기준으로 수행한다면 항공기의 안전성을 보장할 수 있음이 검증되었다.

• Advances in nano research
• /
• 제14권6호
• /
• pp.575-590
• /
• 2023

Many of small-scale devices should be designed to tolerate high temperature changes. In the present study, the states of buckling and stability of nano-scale cylindrical shell structure integrated with piezoelectric layer under various thermal and electrical external loadings are scrutinized. In this regard, a multi-layer composite shell reinforced with graphene nano-platelets (GNP) having different patterns of layer configurations is modeled. An outer layer of piezoelectric material receiving external voltage is also attached to the cylindrical shell for the aim of observing the effects of voltage on the thermal buckling condition. The cylindrical shell is mathematically modeled with first-order shear deformation theory (FSDT). Linear elasticity relationship with constant thermal expansion coefficient is used to extract the relationship between stress and strain components. Moreover, minimum virtual work, including the work of the piezoelectric layer, is engaged to derive equations of motion. The derived equations are solved using numerical method to find out the effects of temperature and external voltage on the buckling stability of the shell structure. It is revealed that the boundary condition, external voltage and geometrical parameter of the shell structure have notable effects on the temperature rise required for initiating instability in the cylindrical shell structure.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.69-77
• /
• 2005

KSR-III 개발과정에서 배플을 장착하여 연소 불안정 현상을 해결한 바 있으나, 추력 및 냉각과 관련된 축방향 길이에 대한 최적화 과정을 거치지는 않았다. 이에 수동제어기구로서 사용되는 배플의 축방향 길이의 최적화 및 한계를 평가하기 위하여, 축방향 길이를 작동인자로 하여 연소 안정성 여분을 평가하였다. 외부 교란 발생 장치로서 2번의 기폭이 가능한 펄스건을 사용하였다. 외부 교란에 대한 연소실에서의 응답 특성을, 감쇠 시간과 진폭비와 같은 인자를 도입하여 정량화하였다. 설계점과 탈설계점에서 시험을 수행하였으며, 분사기의 충돌점으로 생각할 수 있는 화염 영역을 감싸지 못하는 경우에는 배플의 충분한 감쇠 능력을 보장할 수 없음을 확인하였다. 따라서 연소 안정성의 여분의 경계는 KSR-III에서의 작동조건 하에서 50 mm 정도의 배플인 것으로 판단되었다.

• 항공우주기술
• /
• 제3권1호
• /
• pp.188-196
• /
• 2004

수동제어기구로서 사용되는 배플의 축방향 길이의 최적화 및 한계를 평가하기 위하여, 축방향 길이를 작동인자로 하여 연소 안정성 여분을 평가하였다. 외부 교란 발생 장치로서 2번의 기폭이 가능한 펄스건을 사용하였다. 외부 교란에 대한 연소실에서의 응답 특성을, 감쇠 시간과 진폭비와 같은 인자를 도입하여 정량화하였다. 설계점과 탈설계점에서 시험을 수행하였으며, 분사기의 충돌점으로 생각할 수 있는 화염 영역을 감싸지 못하는 경우에는 배플의 충분한 감쇠 능력을 보장할 수 없음을 확인하였다. 따라서 연소 안정성의 여분의 경계는 50mm 정도의 배플인 것으로 판단되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권4호
• /
• pp.41-45
• /
• 2012

An HTS (high temperature superconducting) coil without insulation has been investigated since a metallic insulation was suggested in the mid-1980s. The advantage of an insulationless HTS pancake coil is that it is more stable than an insulated HTS pancake coil. This paper focuses on the various characteristics of the insulationless HTS pancake coil related with stability, especially under the external magnetic field. Because HTS pancake coil may be influenced by the external magnetic field in a real operational environment of electrical devices. First, charge-discharge test was performed for the characteristics evaluation of the insulationless HTS pancake coil as compared with insulated HTS pancake coil in liquid nitrogen at 77 K. Based on the experiment results, characteristics evaluation of the insulationless HTS pancake coil was implemented under the external magnetic field. In order to carry out the experiment, we have fabricated a cylindrical solenoid coil to apply the magnetic field. The various characteristics of the insulationless HTS pancake coil were evaluated for charge-discharge and over-current conditions. This paper proves that the insulationless HTS pancake coil is more stable than the insulated HTS pancake under the external magnetic field.

• East Asian mathematical journal
• /
• 제36권5호
• /
• pp.547-554
• /
• 2020

Synchronization of unidirectional identical FitzHugh-Nagumo systems coupled in a ring structure under ionic and external electrical stimulations is investigated. In this network, each neuron is only connected and transmit signals to its next neuron via synaptic strength called gapjunctions. Adaptive control theory and Lyapunov stability theory are used to propose a unique control scheme with necessary and sufficient conditions which guarantee the synchronization of the neuronal network. Finally, the effectiveness of the proposed scheme is shown through numerical simulations.

• 대한조선학회지
• /
• 제12권1호
• /
• pp.83-90
• /
• 1975

In order to establish a stability and buoyancy criteria of a floating vessel, the geometrical property as well as external forces and moments be dealt with. This paper discusses in general terms hidden but more salient factors of forces and moments of both natural and artificial origin, particularly wind, with regard to vessels of more general type such as oil drilling rigs.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.465-471
• /
• 2016

PURPOSE. The purpose of this study is to evaluate the stability of interface between Co-Cr-Mo (CCM) UCLA abutment and external hex implant. MATERIALS AND METHODS. Sixteen external hex implant fixtures were assigned to two groups (CCM and Gold group) and were embedded in molds using clear acrylic resin. Screw-retained prostheses were constructed using CCM UCLA abutment and Gold UCLA abutment. The external implant fixture and screw-retained prostheses were connected using abutment screws. After the abutments were tightened to 30 Ncm torque, 5 kg thermocyclic functional loading was applied by chewing simulator. A target of $1.0{\times}10^6$cycles was applied. After cyclic loading, removal torque values were recorded using a driving torque tester, and the interface between implant fixture and abutment was evaluated by scanning electronic microscope (SEM). The means and standard deviations (SD) between the CCM and Gold groups were analyzed with independent t-test at the significance level of 0.05. RESULTS. Fractures of crowns, abutments, abutment screws, and fixtures and loosening of abutment screws were not observed after thermocyclic loading. There were no statistically significant differences at the recorded removal torque values between CCM and Gold groups (P>.05). SEM analysis revealed that remarkable wear patterns were observed at the abutment interface only for Gold UCLA abutments. Those patterns were not observed for other specimens. CONCLUSION. Within the limit of this study, CCM UCLA abutment has no statistically significant difference in the stability of interface with external hex implant, compared with Gold UCLA abutment.