• Environmental Engineering Research
• /
• 제14권3호
• /
• pp.158-163
• /
• 2009

It is difficult for a burner to achieve an increase in combustibility and a reduction of NOx emission, simultaneously. The reason is because thermal NOx could be reduced at low temperature, while the combustibility should be decreased. To solve this problem, an externally oscillated staging burner was developed, and experiment was conducted according to effective parameters. The combustibility could be improved through the accelerated transfer of heat, mass and momentum obtained by external oscillation. Also, NO is reduced by the decrease of residence time of burning gas in the local highest-temperature spot, which is decreased by the external oscillation and fuel staging. Experiments on variables were conducted to determine the reference flame, and the flame generating the lowest NO concentration was selected. The conditions of reference flame were oscillation frequency 250 Hz, sound pressure 1 VPP, and air ratio 1.1, and NO and CO concentrations were 1ppm and 20 ppm, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제29권12호
• /
• pp.2365-2367
• /
• 2008

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1374-1376
• /
• 2005

In driving for the electronic ballast lamp which higher quality and performance according to it's frequency which can be critically in Fluorescent Lamp in reliability to the external oscillation electronic ballast module. For the Fluorescent Lamp I cheesed the high frequency T5 lamp that is outstanding in the EU market.

• 한국정밀공학회지
• /
• 제33권2호
• /
• pp.89-94
• /
• 2016

Equipments to influence by external force have to take effect mechanical oscillation. These equipments regardless of the movement on the external force such as roll, pitch and heave etc, worked to keep the height of tote are required for activeness and needed a device as equipment's fluctuation for rapidly compensation. Because the actual development of these devices is difficult to cost-effectively, we were developed to compensation simulator scaled down 1/50. In this paper, we were studying kinematic characteristics, designed the simulator to grasp the point and manufactured. This paper was analyzed for confirming the superiority of compensation simulator and set up 50 ton crane in practice.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.90-95
• /
• 1997

In this work, linear dynamics of a circulating fluid-fueled subcritical reactor system with temperature feedback and external neutron source was modeled and examined. In a circulating fluid-fuel system, the stable region is slightly moved by a circulation fluid effect. The effects of subcriticality and temperature feedback coefficient on the reactor stability were tested by calculating frequency response of neutron density originated from reactivity perturbation or external source oscillation of system. The amplitude transfer function has a different shape near subcritical region due to the exponential term in the transfer function. The results of the study show that at a slightly subcritical region, low frequency oscillation in accelerator current or reactivity can be amplified depending on the temperature feedback. However, as the subcriticality increases, the oscillation becomes negligible regardless of the magnitude of the temperature feedback coefficient.

• 대한전자공학회논문지
• /
• 제25권9호
• /
• pp.1108-1114
• /
• 1988

Usng the P.Yeh's analytic method, we derive the condition for oscillation of a linear phase conjugate oscillator which consists of photorefractive medium and two conventional mirrors. From this general oscillation condition, we obtain the threshold oscillation conditon of a single phase conjugate resonator and the self-oscillation condition of photorefractive medium, then in special case (phase shift =90\ulcorner: no external dc electric field), oscillation conditions of the linear phase conjugate oscillator for any cavity length are derived. The results indicate that, unlike in a phase conjugate oscillator with Kerr-like medium, oscillation cannot occur at special cavity length for given couplinyg strengths.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.609-613
• /
• 1986

The resonance frequency and the gain for oscillation of external cavity diode lasers are derived by approximating the phase and the gain conditions. By modifying single mode rate equations for the external cavity diode laser, steady state solutions and their stability are studied.

• 대한의용생체공학회:의공학회지
• /
• 제5권1호
• /
• pp.47-54
• /
• 1984

In order to research the flow in the thin wall compliant tube, this present study is attempt to measure the cross sectional area according to change of external pressure and flow by ultrasonic method different from willy used impedance technique for flow analysis about one dimensional Steads flow. The experimental results are as follows. 1) Measurement of cross sectional area ratio by ultrasonic method by comparison with experimental results of impedance technique & theoretical results were well consent. 2) Pressure difference of upstream and down stream is alwap's maximum range at 0.4 < $\alpha$ <0.5, and have no connection with changing external pressure. 3) when the external pressure is fixed and resistance is varied, Self excited oscillation occurs in the region at 0.5 < $\alpha$ <0.6, and oscillation disappear almost at R2>=1.2

• 전기학회논문지
• /
• 제62권2호
• /
• pp.228-231
• /
• 2013

This paper proposes a new method that reduces RCS(rader cross section) of the aluminum plate using a oscillation system composed of a VGA(variable gain amplifier) and a phase shifter. Once the oscillation system receives the external-RF signal through a probe on aluminum plate, it makes an amplified signal with a specific phase to cancel the signal reflected from the aluminum plate. The signal transmitted from the oscillation system has the same amplitude and out of phase with the reflected signal. And it can be controlled by the VGA and the phase shifter in the oscillation system. In order to validate the performance of the proposed oscillation system, FEM simulator was used and we measured how much an amplitude of the signal reflected from the aluminum plate rotated in phi direction is reduced in an anechoic chamber.

• 한국광학회지
• /
• 제5권3호
• /
• pp.394-403
• /
• 1994

외부 광귀환이 있는 레이저 다이오드의 혼돈특성에 관해 고찰하였다. Fabry-Perot 공진기 형태의 레이저에 외부 거울에 의한 광귀환을 가정하였으며 파장 $1.3{\mu}m$의 "InGaAsP" buried-hetero structure 레이저에 $1.3J_{th}$의 전류가 인가되었을 때를 모의전산 하였다. 광귀환계수 K의 증가량에 따라 다음의 네단계로 진화현상을 보이고 있다. (1)광귀환계수 K가 아주 작을 때는 시간이 지남에 따라 이완발진은 감쇄되고, 정상 상태에 도달하여 안정된 동작특성을 보인다. (2)K가 조금 증가하면 이완발진은 감쇄되지 않고 주기적인 발진을 유지하기 시작한다. (3)K가 더욱 증가하면 발진의 폭은 증가하고 발진형태의 주기는 길어진다. (4)K가 매우 증가하면 발진형태는 안정을 잃고 coherence collapse 상태에 도달한다.