• Journal of Veterinary Science
• /
• 제22권5호
• /
• pp.47.1-47.10
• /
• 2021

Background: Due to multiple similarities in the structure and physiology of human and pig skin, the pig model is extremely useful for biological drug testing after subcutaneous administration. Knowledge of the differences between subcutaneous injection sites could have a significant impact on the absorption phase and pharmacokinetic profiles of biological drugs. Objectives: This study aimed to analyze the impact of administration site on pharmacokinetics and selected biochemical and hematological parameters after a single subcutaneous administration of ustekinumab in pigs. Drug concentrations in blood plasma were analyzed by enzyme-linked immunosorbent assay. Pharmacokinetic analyses were performed based on raw data using Phoenix WinNonlin 8.1 software and ThothPro v 4.1. Methods: The study included 12 healthy, female, large white piglets. Each group received a single dose of ustekinumab given as a 1 mg/kg subcutaneous injection into the internal part of the inguinal fold or the external part of the inguinal fold. Results: The differences in absorption rate between the internal and external parts of the inguinal fold were not significant. However, the time of maximal concentration, clearance, area under the curve calculated between zero and mean residence time and mean residence time between groups were substantially different (p > 0.05). The relative bioavailability after administration of ustekinumab into the external part of the inguinal fold was 40.36% lower than after administration of ustekinumab into the internal part of the inguinal fold. Conclusions: Healthy breeding pigs are a relevant model to study the pharmacokinetic profile of subcutaneously administered ustekinumab.

• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.31-38
• /
• 2013

A pulse driven atmospheric plasma jet controlled by external ballast capacitor is developed. Unlike the most commonly use DBD sources, the proposed device utilizes bare metal electrode. The discharge energy per pulse can precisely be determined by changing voltage and capacitance of the ballast capacitor. It is shown that the device can provide wide range of plasma, from stable glow mode to near arc state. Current-voltage waveforms, optical emission spectra and discharge images are investigated as a function of an injection energy. The OES shows that He and oxygen lines are increased as a function of the external ballast capacitor. Ozone and rotational temperature have similar tendency with a power consumption. The feeding gas is He and the applied DC voltage is from 400V to 800V when the gap distance is $500{\mu}m$.

• 구강회복응용과학지
• /
• 제27권2호
• /
• pp.247-251
• /
• 2011

교근비대 환자들은 그들의 각진 턱을 심미적으로 개선시키기 위해 교근 두께를 줄이기를 희망한다. 과거엔 수술적인 방법이 널리 알려져 왔지만 최근 양측으로 주사하는 보톡스 시술이 수술에 비해 덜 침습적이기에 그 대안으로 관심이 대두되고 있다. 이 연구의 목적은 기존의 양측성 교근비대에서 양측에 동량을 주사하는 방법과 달리 편측성 교근비대 환자에서 보툴리눔 독소를 편측으로만 주입 후 삼차원 레이저스캐너를 이용하여 안모의 부피변화를 측정하고자 하였다. 삼차원 레이저스캐너를 이용하여 술전에 편측성 교근비대 환자 10명의 하안모 부피를 측정한 후, 편측으로 보툴리눔 A형 독소 주사 25U이 주사되었다. 주사 4주, 8주, 12주 후 같은 방법으로 하안모의 부피를 측정한 뒤 술전의 삼차원 사진과 중첩하여 변화된 부피를 측정하였다. 주사한 쪽의 부피는 술전에 비해 보툴리눔 독소 주사 4주, 8주, 12주 후 현저히 줄어들었으며 통계학적으로 유의미한 결과를 보였다. 반면 주사안한 쪽의 부피는 특기할 변화가 없었다. 따라서 편측성 교근비대 환자에서 편측 보툴리눔 독소 주사 후 주사한 쪽의 부피가 현저히 감소하여 근육성 비대칭 환자에서 편측 보툴리눔 독소 주사가 심미적 개선에 도움을 줄 수 있을 것으로 사료된다.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.773-787
• /
• 2020

In the injection molding process, the controlling stability of products quality is a very important factor in terms of productivity. Even when the optimum process conditions for the desired product quality are applied, uncontrollable external factors such as ambient temperature and humidity cause inevitable changes in the state of the melt resin, mold temperature. etc. Therefore, it is very difficult to maintain prodcut quality. In this study, a system that learns the correlation between process variables and product weight through artificial neural networks and predicts process conditions for the target weight was established. Then, when a disturbance occurs in the injection molding process and fluctuations in the weight of the product occur, the stability control of the product quality was performed by ANN predicting a new process condition for the change of weight. In order to artificially generate disturbance in the injection molding process, controllable factors were selected and changed among factors not learned in the ANN model. Initially, injection molding was performed with a polypropylene having a melt flow index of 10 g/10min, and then the resin was replaced with a polypropylene having a melt floiw index of 33 g/10min to apply disturbance. As a result, when the disturbance occurred, the deviation of the weight was -0.57 g, resulting in an error of -1.37%. Using the control method proposed in the study, through a total of 11 control processes, 41.57 g with an error of 0.00% in the range of 0.5% deviation of the target weight was measured, and the weight was stably maintained with 0.15±0.07% error afterwards.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.89-92
• /
• 2017

The performance of three-layered organic light-emitting diodes (OLEDs) was investigated using TPD hole-transport and injection layers, Teflon-AF, and the electron-injection layer of $Li_2CO_3$ and LiF. The OLEDs were manufactured in a structure of TPD/$Alq_3$/LiF, TPD/$Alq_3$/$Li_2CO_3$, and AF/$Alq_3$/LiF using low-molecular organic materials. In three different three-layered OLEDs, it was found that the device with the TPD/$Alq_3$/LiF structure shows higher performance in maximum luminance, and maximum external quantum efficiency compared to those of the device with TPD/$Alq_3$/$Li_2CO_3$ and TPD/$Alq_3$/LiF by 35% and 17%, and 193% and 133%, respectively. It is thought that the combined LiF/Al cathode contributes to a reduced work function and improves an electrical conduction mechanism due to the electron injection rather than the hole transport, which then increases a recombination rate of charge carriers.

• 한국전기전자재료학회논문지
• /
• 제27권1호
• /
• pp.50-55
• /
• 2014

It was firstly found in 1st group element. Recently, it has been reported on the improvement of efficiency of the OLEDs by introducing thin layer of some carbonate materials of alkali metal. In order to improve the efficiency of OLEDs which is one of the next generation displays, we have studied the electrical characteristics of the device depending on the thickness ratio of the hole-injection layer to the electron-injection layer. Teflon-AF was used as the hole-injection material, and alkali-metal carbonates of $Li_2CO_3$ were used as the electron-injection materials. To obtain a proper thickness ratio, we manufactured. Four types of devices with the thickness ratio of HIL to EIL were made to be 1 : 4, 2 : 3, 3 : 2, and 4 : 1. The results of electrical and optical properties showed that the device with the thickness ratio of 4 : 1 is the most excellent result. In addition, to prepare a four-layer device by inserting the ${\alpha}$-NPD is a hole transporting material was compared with three-layer element. As a result, the maximum luminance, the maximum luminous efficiency, maximum external quantum efficiency of about 124 [%], 164 [%], 106 [%] improve was confirmed.

• 전기전자학회논문지
• /
• 제24권3호
• /
• pp.706-712
• /
• 2020

유기전기발광소자(Organic light diodes, OLEDs)의 전기발광특성을 향상시키기 위해, 본 논문에서는 용액 공정 정공주입층으로 신규 hexaazatrinaphthylene(HATNA) 유도체들을 도입한 고효율 녹색인광 OLED소자의 특성을 연구하였다. HATNA 유도체는 Indium Tin Oxide(ITO)의 일함수와 비슷한 낮은 the lowest unoccupied molecular orbital(LUMO) 에너지 준위를 가져 다른 개념의 정공주입 메커니즘을 보여주었다. HATNA 유도체를 hole injection layer(HIL)로 사용한 OLED소자들은 HTL로의 정공주입장벽을 효과적으로 감소시키고 발광층 내에 전자와 정공의 균형을 최적화 시켜 외부양자효율이 10.8%에서 15.6%로, 전류 효율은 34.3 cd/A에서 42.7 cd/A로 소자 효율이 크게 향상 되었다.

• Anatomy and Cell Biology
• /
• 제56권2호
• /
• pp.161-165
• /
• 2023

The depressor anguli oris (DAO) muscle is a thin, superficial muscle located below the corner of the mouth. It is the target for botulinum neurotoxin (BoNT) injection therapy, aimed at treating drooping mouth corners. Hyperactivity of the DAO muscle can lead to a sad, tired, or angry appearance in some patients. However, it is difficult to inject BoNT into the DAO muscle because its medial border overlaps with the depressor labii inferioris and its lateral border is adjacent to the risorius, zygomaticus major, and platysma muscles. Moreover, a lack of knowledge of the anatomy of the DAO muscle and the properties of BoNT can lead to side effects, such as asymmetrical smiles. Anatomical-based injection sites were provided for the DAO muscle, and the proper injection technique was reviewed. We proposed optimal injection sites based on the external anatomical landmarks of the face. The aim of these guidelines is to standardize the procedure and maximize the effects of BoNT injections while minimizing adverse events, all by reducing the dose unit and injection points.

• 한국연소학회지
• /
• 제21권4호
• /
• pp.6-15
• /
• 2016

The oxygen fuel MILD (Moderate or Intense Low-oxygen Dilution) combustion has been considered as one of the promising combustion technology for flame stability, high thermal efficiency, low emissions and improved productivity. In this paper, the effect of oxygen and fuel injection condition on formation of MILD combustion was analyzed using lab scale oxygen fuel MILD combustion furnace. The results show that the flame mode was changed from a diffusion flame mode to a split flame mode via a MILD combustion flame mode with increasing the oxygen flow rate. A high degree of temperature uniformity was achieved using optimized combination of fuel and oxygen injection configuration without the need for external oxygen preheating. In particular, the MILD combustion flame was found to be very stable and constant flame temperature region at 7 KW heating rate and oxygen flow rate 75-80 l/min.

• 혜화의학회지
• /
• 제14권2호
• /
• pp.153-158
• /
• 2005

Objective : We performed this study to understand the trend of recent medical treatment on chronic prostatitis. Methods : We analyzed 20 manuscripts contributed to the Chinese medical journals from 1998 to 2004 that presenting report of recent medical treatment on chronic prostatitis. Results : The results are summarized as follows 1. In clinical cases, we investigate the cause of chronic prostitis was 'ha cho sup yol' 'ki wool' and 'hyul er'. also it combined complex causes. 2. Deep stimulation acu-therapy near prostate was more effective than other acu therapy. 3. External medical treatment was very efficient than other therapy that was rectal injection therapy, fumigation therapy etc. Conclusion : We conclusion that Rectal Injection therapy was clinical effect on chronic prostatitis.