• 제목/요약/키워드: External field

검색결과 1,761건 처리시간 0.028초

분리형과 일체형 리액터에 따른 매트릭스형 초전도 한류기의 외부자장 의존성 연구 (Dependence of External Magnetic Field in the Matrix-Type SFCL with the Separated or the Integrated Reactors)

  • 조용선;최효상;정병익;고성필
    • 전기학회논문지
    • /
    • 제60권4호
    • /
    • pp.880-884
    • /
    • 2011
  • The matrix-type superconducting fault current limiter (MSFCL) consists of the trigger and current-limiting parts. The trigger part with reactors connected in parallel improves the quenching characteristics by applying the external magnetic field into the superconducting units. The current-limiting part with superconducting units connected in parallel and shunt reactors connected in series limit the fault current when the fault occurs. We developed the integrated reactor with the trigger and the current-limiting parts to apply high external magnetic field into the superconducting units. This was composed of a superconducting unit for the trigger part and two superconducting units for the current-limiting parts. We confirmed that the external magnetic field generated in the MSFCL with an integrated reactor was larger than that of the MSFCL with the separated reactors. So the differences of voltages generated between superconducting units were decreased in the difference according to the increment of the applied voltage. The whole magnitude of the SFCL was reduced because the volume of an integrated reactor could be reduced by one-third than that of the separated reactors. We confirmed that the critical behavior between the superconducting units in the MSFCL with an integrated reactor was more improved than that of the MSFCL with the separated reactors.

유한요소법을 이용한 도관 내부 및 외부 음장해석 (An Analysis of Internal & External Duct Acoustic Fields by Using a Finite Element Method)

  • 이재규;이덕주
    • 소음진동
    • /
    • 제3권2호
    • /
    • pp.169-178
    • /
    • 1993
  • Internal & External duct acoustic fields are calculated by using a finite element method. The geometry is assumed as an axisymmetric duct. External acoustic field; outside the duct, and combined internal & external acoustic fields are solved. For both cases a far field's nonreflecting boundary condition is enforced by using a wave envelope element, which is a kind of finite element. First, a pulsating sphere and an oscillating sphere problem are calculated to verify the external problems, and the results are compared with exact solutions. When the wave envelope element is applied at the far boundary, the calculated finite element solutions show good agreements with the exact solutions. Secondly, the combined internal & external duct acoustic fields are calculated and visualized when monopole sources are distributed inside the duct. It is observed that the directivity of sound intensity outside the duct is beaming toward the axis for high frequency sources.

  • PDF

IVERSON언어의 참고어로의 구성(외부매체의 동질화를 위하여) (A Formalism of Iverson Language as a Reference Language for the Organization of Homogeneous Field using many Extermal Media)

  • 김영택
    • 전기의세계
    • /
    • 제24권4호
    • /
    • pp.71-72
    • /
    • 1975
  • A formalism of reference language and homogeneous field is constructed for Iverson Language to organize a virtual file among external media. To execute some data manipulations among these external media files must be organized homogeneously forming multi-dimensional array like single media. This paper shows some organization of reference language to build the virtual file using many external media and some examples of program and hardware organization is presented for the justification of proposals.

  • PDF

CICC 형태의 초전도 버스 선에서 냉각 및 자기장에 의한 응력 해석 (Analysis of the stresses induced by magnetic field and cooling in the CICC type superconducting bus-line)

  • 이호진;남현일;김기백;홍계원
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제2권2호
    • /
    • pp.20-25
    • /
    • 2000
  • A CICC type superconducting bus-line electrically connecting a superconducting magnet to a power supply is cooled down to low temperature under the external magnetic field during operation. The thermal contraction during the cooling may be constrained by the supports which are installed to protect the bus-line from Lorenz magnetic forces. This constrained contraction causes thermal stresses in the bus-line to release thermal contraction. The minimum stress conditions in the bus-line may be optimized by controlling the supporting arrangement considering the thermal contraction and the external field. The analytical method to find optimal supports arrangement was suggested by using the beam theory, and numerical calculation using commercial code was performed to verify the suggested analytical optimization method.

  • PDF

A Study on the Electrical Characteristics of Renewable Electrical Energy Superconducting Precursor using Organic Metal Salts Method for Electrical Power Transmission

  • Lee, Sang-Heon
    • Transactions on Electrical and Electronic Materials
    • /
    • 제6권6호
    • /
    • pp.289-293
    • /
    • 2005
  • We have fabricated superconductor ceramics by chemical process. A high Tc superconductor with a nominal composition of $Bi_2Sr_2Ca_2Cu_3O_y$ was prepared by the organic metal salts method. Experimental results suggest that the intermediate phase formed before the formation of the superconductor phase may be the most important factor. The relation between electromagnetic properties of Bi HTS and external applied magnetic field was studied. The electrical resistance of the superconductor was increased by the application of the external magnetic field. But the increase in the electrical resistance continues even after the removal of the magnetic field. The reason is as follows; the magnetic flux due to the external magnetic field penetrates through the superconductor and the penetrated magnetic flux is trapped after the removal of the magnetic flux.

전력용 Nanocomposite의 열화학 특성 (Thermal Properties of Ploymide Nanocomposite)

  • 이상헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.44-45
    • /
    • 2006
  • We have fabricated superconductor ceramics by chemical process. A high Tc superconductor with a nominal composition of ${Bi_2}{Sr_2}{Ca_2}{Cu_3}{O_y}$ was prepared by the organic metal salts method. Experimental results suggest that the intermediate phase formed before the formation of the superconductorphase may be the most important factor. The relation between electromagnetic properties of Bi HTS and external applied magnetic field was studied. The electrical resistance of the superconductor was increased by the application of the external magnetic field. But the increase in the electrical resistance continues even after the removal of the magnetic field. The reason is as followsthe magnetic flux due to the external magnetic field penetrates through the superconductor and the penetrated magnetic flux is trapped after the removal of the magnetic flux.

  • PDF

외부 자계 인가에 따른 고온초전도 케이블 도체의 ?치 특성 (Influence of external magnetic field on HTS cable conductor)

  • Seong Woo Yim;Si Dole Hwang;Je Myoung Oh;Byung Sung Han
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2003년도 추계학술대회 논문집
    • /
    • pp.284-287
    • /
    • 2003
  • Quench characteristics of HTS cable conductor due to external magnetic field were investigated. Firstly, the influence of critical characteristics of HTS tape on locally applied magnetic field was examined. Secondly, critical current of HTS tapes, which are wound on surface of former, were measured respectively, before the experiment for quench characteristics, Finally, 50mT and 100mT were applied to HTS cable conductor and quench characteristics were investigated through V-I curves. As the results, same as the result of HTS tape, HTS cable conductor showed strong dependence on external magnetic field with direction and magnitude.

  • PDF

외부자계의 인가방향에 따른 HTS 선재의 자화손실 특성 (Magnetization Loss Characteristics of HTS Tapes in AC External Magnetic Fields Applied in Different Orientations)

  • 박명진;임형우;최명섭;차귀수;이지광
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 B
    • /
    • pp.961-963
    • /
    • 2003
  • Magnetization losses of HTS depend strongly on the orientation of external magnetic field because of anisotropy characteristics. For parallel and perpendicular magnetic field, analytical models to calculate the loss are well known but there is no analytical model for magetic fields which are applied to surface of HTS with arbitrary angle. In this paper, magnetization losses are measured for various incidence angles($15^{\circ}$, $35^{\circ}$, $45^{\circ}$, $60^{\circ}$) and compared with parallel and perpendicular loss. As a result, magnetization losses in HTS are strongly affected by perpenducular magnetic field component of external magnetic field.

  • PDF

COERCIVE FIELD AND SPIN-GLASS BEHAVIOR OF AMORPHOUS Y-Fe ALLOYS

  • Fujita, A.;Fukamichi, K.
    • 한국자기학회지
    • /
    • 제5권5호
    • /
    • pp.762-766
    • /
    • 1995
  • The coercive field $H_{c}$ of amorphous Y-Fe alloys in the spin-glass state has been investigated. Foramorphous $Y_{10}Fe_{90}$ alloy, the thermal variations of $H_{c}$ in the maximum external field $H_{max}=300,\;600$ and 1 k Oe exhibit a maximum. Since spin-glass behavior is strongly affected by external magnetic fields, the maximum point moves to lower temperature with increasing $H_{max}$. The appearance of the maximum in $H_{c}$ has been discussed in terms of the change of the spin-glass state in the external magnetic field. When the value of $H_{max}$ is 55 kOe, the temperature dependence of $H_{c}$ has no maximum and shows an exponential decrease with increasing temperature. Similar trends have been observed over a wide concentration range. The concentration dependence of $H_{c}$ is associated with the magnetic phase diagram.

  • PDF