• 한국환경보건학회지
• /
• 제34권1호
• /
• pp.62-69
• /
• 2008

The life cycle assessment method for environmental impact assessment was used, in this study, to assess the production process of wheat flour which is the most important material in the food industry. Environmental impact assessments were compared between that of the Ministry of Environment, Republic of Korea (method I) with that of the Ministry of Commerce, Industry and Energy (method II). Life cycle inventories (LCI) was performed using internal and external databases and the production statistics database of company S. The procedure of life cycle impact assessment (LCIA) was followed in terms of classification, characterization, normalization and weighting to identify the key issues. The impact categories of method I were divided into 8 categories with consideration of : abiotic resources depletion, global warming, ozone depletion, photochemical oxidant creation, acidification and eutrophication. The impact categories of method II were divided into 10 categories with consideration of: abiotic resources depletion, global warming, ozone depletion, photochemical oxidant creation, acidification, eutrophication, human toxicity, freshwater aquatic ecotoxicity, marine aquatic ecotoxicity and terrestrial ecotoxicity.

• Journal of Biosystems Engineering
• /
• 제31권4호
• /
• pp.369-375
• /
• 2006

Mechanical properties of potato and sweet potato were measured under impact and compression loading. The test apparatus consisted of disgital storage oscilloscope and simple mechanisms which can apply compression and impact forces to potatoes and sweet potatoes. The mechanical properties could be measured while the tissues were ruptured in a very short period time less than 10 ms by impact loading. Rupture force, energy, and deformation were measured as mechanical properties of potatoes and sweet potatoes under impact and compression loading. Rupture forces under impact and compression loading were in the range of 84.1 to 93.7N and 128.9 to 132.2N for external tissues and 60.1 to 64.8N and 158.9 to 171.1N for internal tissues of potato and sweet potato, respectively. Compression speeds and drop heights for each test were in the range of 1.25 to 62.5mm/min and 8 to 24cm.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.181-182
• /
• 2015

The use of non-bearing light weight wall has increased recently due to the increase of high-rise buildings and supply of long-life housing. Light weight wall has advantages such as reducing the self-weight of the building, convenience in installation, and shortening construction period, however, must have a sufficient strength to external force. This study standardized the impact resistance test method for light weight walls by using the actual impact load obtained through load analysis test in previous studies. The impact resistance test method was divided into the test method that uses soft body and the one that uses hard body. The size of specimen was set up as height 2.4m and width 3.0m. The size and shape of the body followed those used in BS 5234-2 and so on for the compatibility with the test method used overseas. The judgment criteria for impact resistance based on test results were not defined uniformly as the assessment of functional damage can vary depending on the type of material, structural method, purpose of wall, and so on even when the same impact load was applied.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.82-87
• /
• 2012

The purpose of this study is to produce a side impact beam with high tensile steel using a roll forming process. The door side impact beam plays an important roll in a car because it protects passengers from external crash. The roll forming process is a continuous bending process wherein a long metal sheet is bended as it continuously passes several rolls. The characteristic of this study is that an impact beam is produced by a continuous process using a ultra high strength steel without a hardening heat treatment. A model was determined by analysing plasticity of a cross section shape considering high strength. Design parameters of the impact beam was determined by crash-analysing the model. Workpiece products were manufactured by designing dies for roll forming and setting them up in a following process line. Results of a bending test and a FEM analysis was considered and reviewed.

• 대한가정학회지
• /
• 제35권4호
• /
• pp.31-46
• /
• 1997

The controversy between Lewis and Spanier's theory and Thomas and kleber's theory on marital satisfaction and marital stability was tested empirically. The results show that while marital satisfaction was the best predictor for marital stability the impact of alternative attractions and external pressures to remaim married was more complicated than both theories predicted depending on the nature of alternative attractions. Thomas and Kleber's theory was supported in most of groups Contrary to Lewis and Spanier's theory alternative atteractions did not negatively affect marital stability of marriages of high qulity. Contrary to both theories external pressures to remain married was not an important predictor of marital stability . In some cases high external pressures to remain married even lowered marital stability. The validity of both theories are discussed.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.786-790
• /
• 2000

This paper is concerned on the theoretical and experimental approaches of direct piezoelectric effect in the PVDF film. When a cantilever structure of PVDF film is bended by the external force, electric charges are concentrated on the electrode surface of the film due to the direct piezoelectric effect, and output voltage is induced from the terminals of the film. In this paper, a symbolic equation between the external force and the output voltage was introduced. Moreover, the theoretical output voltages were compared with the experimental results by falling balls, which were agreed well each other. This results can be useful in a warning system of abnormal pulse rate and breathing, and in detecting impact force and/or mechanical energy using bending of PVDF film.

• Journal of Information Technology Applications and Management
• /
• 제27권4호
• /
• pp.1-19
• /
• 2020

Infringement of information security has caused the corporate image to be damaged and share price to fall, and it is emerging as an organizational risk. The value of information assets in enterprises has led to a higher level of security than in the past. As a result, companies are aware of the need for officers to protect information and to oversee a security management system. However, despite the growing importance of information security officers, there is a lack of research on their roles and characteristics. This study validates the relationship between determinants that affect the performance of information security. And a structural equation model was presented and empirically analyzed to see the impact of the internal and external characteristics of the staff in charge of information security on the organization's information security performance.

• 디지털융복합연구
• /
• 제16권2호
• /
• pp.93-102
• /
• 2018

본 연구는 기업이 지식을 창출하고 혁신에 이르기 위해 노력하는 방안으로써 외부지식탐색을 제시하고 외부지식탐색의 폭과 깊이를 중심으로 혁신속도와의 관계를 살펴보았다. 국내시장에서 기업이 외부지식탐색이 가지는 루틴의 한계를 극복하기 위한 노력의 일환으로 해외시장으로 진출하고자 하는 노력을 조절효과로 살펴보았다. 기존연구에서는 외부지식탐색이 대부분 단일국가 혹은 유사 산업 간에서 나타나는 여러 가지 효과를 살펴보았다면, 본 연구는 이를 조금 더 확장하여 시장확대 개념을 도입해 그 상호작용을 실증한 것이다. 본 연구에서 사용된 818개의 유효 표본은 STEPI에서 발간하는 혁신조사를 기반으로 하였으며, 실증결과는 다음과 같다. 첫째, 외부지식탐색의 폭과 깊이는 혁신속도에 긍정적인 영향을 미친다. 둘째, 시장확대효과로써 수출성과는 외부지식탐색의 폭 및 깊이와 함께 상호작용하여 혁신속도에 조절효과를 가진다. 셋째, 젊은 기업일수록 다양한 네트워크를 선호하면서 수출증대효과와 상호작용하며 나이가 많은 기업일수록 심도있는 네트워크를 선호하면서 수출증대와 상호작용하여 혁신속도를 증가시킨다.

• 공업화학
• /
• 제35권4호
• /
• pp.267-272
• /
• 2024

본 논문에서는 미세유체장치 기반 외부 자극에 의한 결정화 기술의 최근 발전에 대해 탐구한다. 초음파, 레이저, 마이크로파, 전기장과 같은 대표적인 네 가지 결정화 기법인 외부 자극의 종류에 대해 중점을 두어 외부 자극이 결정 성장에 미치는 영향을 강조한다. 결정 품질 향상, 구조 형성, 물리적 특성 변화 등의 이점을 강조하며 외부 자극을 통한 결정화(external-source-induced crystallization) 기술에 대한 포괄적인 개요를 제공하고 잠재적인 발전 가능성에 대해 논의한다.

• 기술혁신학회지
• /
• 제13권2호
• /
• pp.332-364
• /
• 2010

본 연구는 중소기업의 외부협력이 기업의 혁신, 매출성장과 수익증가, 그리고 생존에 미치는 영향을 다각적으로 분석하였다. 기업의 성과를 다양한 측면으로 나타내었을 뿐 아니라 외부연계는 직접협력과 비공식지식흐름의 두 가지 측면을 모두 고려하여 각 파트너 유형마다 기업의 성과에 어떠한 영향을 미치는 지 보다 세밀하게 검토하였다. 또한 Pavitt의 혁신체제 분류를 응용한 방식(Freel 2003; 홍장표 김은영 2009)을 도입하여 산업혁신체제별로 외부협력의 성과가 다르게 나타남을 보였다. 분석결과 기존의 국제연구(Belderbos et al. 2004)에서 관측되지 않았던 외부연계의 영향이 산업혁신체제별로 관측되었다. 대학 및 공공기관과의 협력 그리고 고객과의 협력이 매출증대에 도움이 되는 점이 확인되었으며 경쟁업체와의 협력은 생존측면에서 부정적인 면을 내포하고 있음이 탐지되었다. 본 연구의 결과는 과학기반혁신체제의 경우 외부협력이 효과가 있다는 것을 밝히고 있다. 또한 매출증대효과 및 생존율 향상 효과가 있는 대학 및 공공기관 협력을 통해 관계위험이 존재하는 경쟁업체와의 협력을 보완하는 방식이 효과적일 수 있다는 시사점이 도출되었다.