• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.1
• /
• pp.131-137
• /
• 1999

It is very important that we try to keep our traditional historical assets in the original form for a long time. Artificial grotto has a very long and old history of about 1250 years in Korea. Yet, for the past several years there are many factors ruinning this historical treasure. Recently, specialist are new scientifically examining artificial grotto and evaluating its current condition. If you only judge these historical assets from the exterior structural environmental approach your scientific conclusion will not be complete. No one has studied artificial grotto from the viewpoint of indoor climate environmental. Therefore, I have surveyed and prepared a report of investigation as well as countermeasure so to understand the impact of indoor climate environmental on artificial grotto. The purpose of this paper is to first survey the existing research data based on exterior structural environment. Secondly, closely evaluate the new data of artificial grotto from the viewpoint of indoor environmental control by a natural climate phenomenon in Korea.

• Journal of the Korean housing association
• /
• v.25 no.1
• /
• pp.23-32
• /
• 2014

This research progressed space evaluation test with 3D simulation for exterior space of detached housing area among the Seoul spaces of child sex offense in 2010. Based on changing analysis on natural surveillance by spatial changes of each physical element, the purpose is to suggest effective construction planning measure for preventing child sex offense. The results of research are as follows. First, natural surveillance of space's height differences and width differences were compared and analyzed. As the result, footpath shows that stairs of slope didn't make lots of effects on visual block, not block of spatial moving, because of the difference of stair height. Also, in case of parking space, visual connection with footpath is expanded when designing pilotis rather than heightening floor height, so activities of exterior people could be seen more easily. Therefore, natural surveillance was higher. Second, natural surveillance of architectural elements by changes of footpath' width was compared and analyzed. As the result, openness of footpath should be secured rather than openness of architectural element. And, planning autonomy of architectural form could be more expanded when securing openness of footpath.

• Korean Institute of Interior Design Journal
• /
• v.20 no.4
• /
• pp.11-20
• /
• 2011

Jeju Special Self-Governing Province are trying every effort to be presented as an International Free City with unique combination of history, culture and landscape, This research focuses on the analysis of characteristics we can find in buildings in Jeju province. The main purpose is to provide basic and informative materials for the landscape formation of Jeju by investigating current status of buildings in Jeju province. This research divides Jeju province into 34 areas and categorizes buildings by use. 2,973 cases in total are collected and analyzed their architectural features. A basic analysis of the collected data is conducted in the first and the second stages. And In the third stage, 505 cases whose addresses can be identified are selected for the in-depth analysis of the registered building data on architecture year, building area, and total area. These data are analyzed by the categories of region, year, and size for the study of general characteristics of buildings in Jeju. The results show that territoriality is weak because of the simplicity of building layout on the streets. Exterior form of buildings, streetscape image, and overall city image are tedious and boring because of the lack of the variety of facade and exterior finishing materials.

• Architectural research
• /
• v.1 no.1
• /
• pp.31-40
• /
• 1999

In this age of "Information", many people consider it a deterrent to information flow to provide a hierarchy with private rooms in a modern office layout. There are others, however, who insist that visual and acoustical privacy are more important than any other design factor in achieving higher productivity. The debate may never end, but the partitioned open plan, which is a new form of the vast open plan, has merits of each concept - open and closed layout. Consequently, office design has dramatically shifted to partitioned open planning, with shorter, temporary walls or partitions, originally intended for increasing privacy and diminishing hierarchy, yet still keeping flexibility in spatial organization. The introduction of low-level partitioned spaces in an office layout, however, produces a complicated lighting design problem. Obviously, accurately predicted daylighting performance data are needed not only for daylighting design but for artificial lighting system design. Scale models of 12 sets of unit partitioned spaces are constructed and extensive scale model measurements of both daylight and reflected sunlight have been performed within an artificial sky simulator. The prototype-building interior is modeled with different partition configurations, each of which is modeled using the different envelope geometry and exterior configurations, and then the variations in interior light levels are estimated. The result indicates that partitioned spaces employed in an open plan of modern offices still offer a large potential for daylighting and energy saving as well. Much of the savings may derive from the cumulative effect of reflected sunlight. Optimal design for building envelope geometry and exterior configuration promises additional savings.

• Journal of Sasang Constitutional Medicine
• /
• v.22 no.1
• /
• pp.9-16
• /
• 2010

1. Background: GalgeunNabokja-Tang(葛根蘿葍子湯) is suggested as treatment and prescription of Exterior Heat syndrome Diarrhea(表熱證泄瀉) in Donguisusebowon Tae-eumin Interior febrile disease induced form the liver affected by heat("東醫壽世保元" "太陰人肝受熱裏熱病論"), but is not recorded the treatment contents in Sinjungbang("新定太陰人病應用要藥二十四方"). 2. Methods: Accordingly, the writer surveyed, compared, and arranged the relevant contents by collecting books of doctors of Four-Constitutional Medicine(四象醫) since Lee Je-ma including Lee Je-ma's books. 3. Results: and Conclusions: 1) The treatment contents in GalgeunNabokja-Tang are thought to be valid to have the criterion as the contents of appearing in SanggyohyuntoDonguisusebowon Boyubang("詳校懸吐東醫壽世保元" "補遺方"). 2) The origin in GalgeunNabokja-Tang is GalgeunNabokja-Tang in Bimang-lok("備忘錄"). And the period of having made treatment for the first time may be estimated to be the one between Donguisuse- bowonSasangchobonguan("東醫壽世保元四象草本卷") and HamsansachonDonguisusebowonGabogubon ("咸山沙村東醫壽世保元甲午舊本"). 3) GalgeunNabokja-Tang is thought to be probably what Han Du-jeong recorded in Boyubang by searching for what Lee Je-ma modified some of GalgeunNabokja-Tang in Bimang-lok while writing Pathological Syndromes("病證論") in Donguisusebowon("東醫壽世保元").

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.2
• /
• pp.3-12
• /
• 1975

As for two dimensional added mass coefficients for straight framed hull forms in a free surface of an ideal fluid, theoretical calculations by F.M. Lewis, vertical, K. Wendel, J.H. Hwang, and etc. are available; vertical modes of rectangular and triangle sections by Lewis, vertical, horizontal and torsional models of rectangular and triangle section by Wendel, and systematical calculations for vertical modes of single chine forms by Hwang. In this paper, employing the conformal transformation by which a unit circle and its exterior region can conformally mapped to a polygon and its exterior region, the author calculated two dimensional added inertia coefficients systematically for straight framed sections with single chine in horizontal and torsional modes of vibrations. As the results, it was found that sloping side angle is an important factor measuring the magnitude of two dimensional added inertia coefficient for a set of given values of the sectional area coefficient and the beam-draft ratio. To grasp it cleary in physical sense, pressure distributions are investigated for some typical section contours. The numerical results are presented graphically in the form of two dimensional added sectional area coefficients with beam-draft ratios and sloping side angles as parameters, so that the data may conveniently utilized for estimation of the added inertia coefficients based on a three parameter technique.

• KCI Concrete Journal
• /
• v.12 no.1
• /
• pp.47-56
• /
• 2000

Once a structure fabricated with mass concrete is in a form of wall such as retaining wall, side walls of a concrete caisson and so on, cracks induced by hydration heat have been known to be governed by exterior restraints which are mainly related to the boundary conditions of the structure. However, it is thought that the degree of restraints can be alleviated considerably only if a lift height of concrete placement or a panel size of the wall is selected properly before construction. As a way of minimizing thermal cracking commonly observed in massive wall-typed structure, this study aimed at evaluating effects of geometrical configuration on the temperature rise and thermal stress through parametric study. Evaluation of the effect was also performed for cement types using anti-sulphate cement, blast furnace slag cement and cement blended with two mineral admixture and one ordinary Portland Cement. so called ternary blended cement. As a result of analytical study, it was found that a lift height of concrete placement is the most important factor in controlling thermal cracking in massive wall, and the increase of a lift height is not always positive to the crack occurrence as not expected.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.133-134
• /
• 2022

This study proposed vision artificial intelligence-based automated supervision technology for external insulation and finishing system, and basic research was conducted for it. The automated supervision technology proposed in this study consists of the object detection model (YOLOv5) and the part that derives necessary information based on the object detection result and then determines whether the external insulation-related adhesion regulations are complied with. As a result of a test, the judgement accuracy of the proposed model showed about 70%. The results of this study are expected to contribute to securing the external insulation quality and further contributing to the realization of energy-saving eco-friendly buildings. As further research, it is necessary to develop a technology that can improve the accuracy of the object detection model by supplementing the number of data for model training and determine additional related regulations such as the adhesive area ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.154-155
• /
• 2021

Appearance finish is important for amorphous buildings to maximize amorphousness, and GFRC, glass, and metal are mostly used as exterior materials for amorphous buildings currently applied. However, the existing exterior materials showed limitations in amorphous expression, texture, and color expression. In this study, a 3D stereoscopic panel mold was manufactured using the FDM method, one of the 3D printing technologies, and 3D stereoscopic panel production was reviewed using Ultra High Performance Concrete (UHPC), which has excellent physical and mechanical performance and expression. In order to overcome the limitations of unstructured expression, a UHPC 3D stereoscopic panel using the FDM method, one of the 3D printing technologies, was manufactured. Unlike steel molds, FRP molds, and EPS molds, the FDM method can be applied to various materials, and complex shapes are implemented. If it is used using recyclable materials as well as PLA filaments used in the FDM method, it will overcome the limitations of amorphous expression and activate the production of 3D stereoscopic panels that have secured eco-friendliness.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.254-263
• /
• 2012

This study found out the change of spacial form of detached house in Korea on a 10-year basis from 1980s though analysis on the architecture of each period. For the subject houses of this study, the detached houses introduced repeatedly as excellent cases in technical journals for architecture were collected among those completed by architects who designed numerous houses and a survey was conducted on 18 detached houses of 18 architects among the in urban style houses in Seoul and suburban style houses in the suburbs of Seoul. Through this study, it could be found that, as the morphological application of traditional architecture was settled with spatial concept, the external spatial form of the detached houses in Korea after 1980s was changed to westernized form but the internal spacial form had been continuously changing suitable to our emotion by reflecting the living habit and taste with the traditional attitude to perceive and accept the nature. As for the change in the forms of interior space, vertical space with more than two floors became common. Front porch and stair hall, which were located at the center of a house and became an important spacial element that overlapped family's moving line, changed to open and bright space that used transparent glass and increased the space to contact the open air, reflecting our living habit and taste that preferred the feeling of internal openness. A Private space, main room, was more segmented and luxurious, and a public space, living room, secured the independency by getting close to symbolic yard. As for the change in the form of exterior space, the form of façade window has been changing in its location and size and brought free images due to the advancement of technology and material. The shape of roofs was borrowed from western style and a lot of geometrical forms that break away from the concept of angle rater and eaves are appearing.