• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.313-321
• /
• 2008

Recently in Japan, fracturing was observed on the diagonal member of a through truss bridge at the boundary region with the concrete slab. Local corrosion damage where the diagonal member was enclosed in the concrete slab is an important factor in the fracture. In this study, accelerated exposure tests were carried out on concrete-steel model specimens simulating steel members at the boundary with concrete. Fatigue tests were then performed on the corroded model specimens. Accelerated exposure tests of the S6-cycle, which is carried out on the model specimens for 150, 300, 450 and 600 da ys. Their surface geometry was then measured. From the accelerated exposure test results, change in maximum and mean corrosion depths was determined according to the testing periods. The effect of local corrosion on fatigue strength was also presented based on the fatigue test results.

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.4
• /
• pp.317-322
• /
• 2002

Objective: These experiments were conducted to investigate the optimal expose length of propidium iodide (PI) and bisbenzimide on differential staining of mouse blastocysts. Materials and methods: A total 964 blastocysts (early${\sim}$hatched) was exposed to PI (n=831) (group I: $\leq$ 10; II: $11{\sim}15$; III: $16{\sim}20$; IV: $\geq$21 sec) and bisbenzimide (n=133) (group A: $\leq$1; B: $1{\sim}$3; C: $\geq$ 4 hr) in several periods for differential staining. Statistical analysis was performed using t-test with SigmaPlot-2001. P-values < 0.05 were accepted as statistically significant. Results: In case of PI exposure, differential staining rates were significantly higher (p<0.05) in group I (89.8%) than in any others (group II: 77.6%; III: 29.6%; IV: 22.2%) and higher (p<0.05) in group II than in group III and IV. In case of bisbenzimide exposure, differential staining rates were not statistically differences in three groups (group A: 97.4%; B: 87.8%; C: 93.3%). Conclusion: The differential staining rates of mouse blastocysts are not affected by the exposure length of bisbenzimide. However, blastocysts were exposed to PI with period of shorter than 15 sec show best outcomes of differential staining rates.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.1
• /
• pp.55-60
• /
• 2018

Objective: This study aimed to analyze the effects of computer game exposure on pathological musculoskeletal symptoms in adolescents. Method: This study included 10 male junior high school students who used computers less than 3 times a week for 1 hr per day. The subjects were asked to play computer games for 4 hr. Magnetic resonance imaging of the hand and wrist, from the distal radius and ulnar head to the distal phalanges, and radiography of the cervical vertebrae were performed before and after playing computer games. For each dependent variable, a paired t-test was performed to identify significant changes before and after a 4-hr active computer game (p<.05). Results: The horizontal diameters of the flexor tendons in the index and middle fingers were significantly reduced after playing computer games. The horizontal diameters of the flexor tendons of other fingers did not show any significant differences, but there was a tendency toward a decrease after playing computer games. There was no significant change in the cervical lordosis angle before and after playing computer games. However, the cervical lordosis angle was relatively decreased. Conclusion: The results of this study showed that computer game exposure had direct and indirect effects on morphological changes of flexor tendons. In addition, playing computer games for long periods of time can have a negative effect on normal functioning of the musculoskeletal system, with the possible development of abnormalities. However, computer game exposure in adolescents cannot be decisively identified as a factor causing pathological symptoms, based on the results of this study alone. Thus, longterm longitudinal studies on the overall musculoskeletal system are necessary.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.509-517
• /
• 2014

Objectives: This study was conducted to investigate the patterns of exposure of welders to strong magnetic fields for extended periods of time on the basis of their daily activities as recorded in a logbook. Methods: Male workers whose main job is welding, specifically seven welders occupied with gas tungsten arc welding(GTAW), two performing shielded metal arc welding(SMAW), and ten engaged in gas metal arc welding(GMAW), were measured in terms of the degree to which they were exposed to extremely low frequency(ELF) magnetic fields over 24 hours by using an electromagnetic field meter(EMF meter), as well as based on a daily activity log. Results: The welders were exposed to $1.25{\pm}4.95{\mu}T$ of magnetic field per day on average. For those who spent more than half a day-735.26 minutes, or 51.1% of the day-at work, the figure averages $3.88{\pm}8.85{\mu}T$ with a maximum value of $221.28{\mu}T$. The subject welders spent $338.14{\pm}154.95$ minutes per day at home. During their stays at home, they were exposed to an average of $0.17{\pm}0.06{\mu}T$ with a maximum value of $3.50{\mu}T$. The maximum exposure of $221.28{\mu}T$ occurred when welders performed GMAW. The average exposure reached its highest at $17.71{\pm}6.96{\mu}T$ when conducting SMAW. Magnetic field exposure also depends upon posture: welders who sat while welding were exposed five times more than those who stood during work, and this difference is statistically significant. As for the relationship between distance from the welding power supply and maximum magnetic field exposure, maximum magnetic field exposure decreases as the distance increases. The average magnetic field exposure, in the meantime, showed no significant difference depending on distance. Conclusions: The following were observed through this study: 1) welders, while conducting jobs, are exposed to magnetic fields not only from the welding machine, but also from the surrounding base material due to the current flowing between the welding machine and base material, meaning that they are continuously exposed to a magnetic field; and 2) welders are more exposed to magnetic fields while they sit at a job compared to when they stand up.

• Korean Journal of Ecology and Environment
• /
• v.43 no.3
• /
• pp.409-417
• /
• 2010

Present study aimed to investigate morphological and physiological change in the tissues of Carassius auratus after exposure against Pb (lead) with various rearing condition. We measured the level of accumulated heavy metal and analyzed ultrastructure with transmission electron microscopy. The heavy metal, Pb, was accumulated in the gill, bone and integument increased drastically for exposure periods, the 40 days. The accumulation of Pb in the gill showed relatively higher than that in other tissues. And accumulated Pb amounts also were increased with exposure time dependent manner in the gill, bone and integument tissues. Also, specific activities of antioxidation enzymes in all tissue after exposure to Pb were increased in the course of exposure. And the activities of SOD from tissues exposed to Pb were increased 2 folds than those from the unexposed but GPX activities were maintained constant. The increased numbers of mucous cells in gill tissues exposed to Pb were determined and morphological changes, such as clubbing and fusion, were shown secondary lamella. Also, exposure of Pb for 40 days on gills tissues cause membrane damage in mitochondria and nucleus. In kidney tissues, the atrophied glomerulus was observed, and the empty space in Bowman's capsule was expanded. Based on the all results, it is suggested that the exposure to the high level of Pb for long period affect on the morphology of tissues, and change the enzymatic balance in C. auratus.

• Journal of radiological science and technology
• /
• v.35 no.3
• /
• pp.219-226
• /
• 2012

Interventional radiologists are not aware of the potential injury from procedures. The purpose of this study are to evaluate radiation exposure of interventional radiologist from intervention procedures and to develop guideline of the simple methods for decreasing their radiation exposure from intervention procedure. In this study, Dosimeters were used to monitor operator doses of radiation exposure in a broad range of procedures from 20 interventional radiologist during the periods of 3 months. And, we searched protection methods of each interventional radiologist. During TACE procedure, there was using 0.5 mmPb radiation protector decreased average 89.5 % of radiation exposure. Thicker radiation protector provide decreasing radiation exposure. And radiation exposure dose decreased average 47.7 % by using pulse fluoroscopic mode. Therefore, interventional radiologist should wear protective aprons, use active shielding, monitor their doses, and know how to poisoning themselves during the procedure and operate correct of the machines for minimum dose.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.105-112
• /
• 1979

A study was carried out to examine the effects of sulfur dioxide gas on soybean plants; at two concentrations(0.2mg/l and 0.5mg/l) and in different fumigation periods, The grain yield of soybeans, sulfur and chlorophyll contents in leaves, and ratios of destroyed leaf were investigated, 1) At the concentration of $SO_2$ 0.5mg/l, a) The yield decrease were 52% and 76.4% at 5 minutes and one houre fumigation period respectively, b) The sulfur contents in leaves were positively correlated with fumigation period and yield decrease, however the water soluble sulfur was superior than the total sulfur in correlation coefficient. 2) At the concentration of $SO_2$ 0.2mg/l; a) The most severe destruction of leaves were observed at noon exposure (10:00-11:00 O'clock) and no visible damage was observed at night exposure (22:00-23:00) b) The sulfur contents in leaves and stems were the highest at noon exposure and the lowest at evening exposure (18:00-19:00 O'clock) chlorophyll contents were the highest at night exposure but, the lowest at noon exposure, c) The ratio of destroyed leaf was positively correlated with the sulfur content of leaves, but negatively correlated with chlorophyll contents. d) Absorbance spectra of chlorophyll in the chlorolast were greatly decreased at noon exposure but slightly decreased at night exposure. The decrease of absorbance spectra was mainly at $456m{\mu}$ and $663m{\mu}$.

• Journal of the Korean Wood Science and Technology
• /
• v.8 no.1
• /
• pp.13-21
• /
• 1980

This experiment was carried out to investigate the effect of heating periods on the physical and mechanical properties of maple (Acer mono Max.) by oven heating and heating in water at 100$^{\circ}C$ for 0, 2, 4, and 6 days respectively. The results obtained are summarized as follows: 1. The green volume specific gravity due to oven heating decreased from 6 days of exposure, and that, due to heating in water decreased from 4 days of exposure. 2. The radial shrinkage due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 6 days of exposure. The tangential shrinkage due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 2 days of exposure. 3. The amount of water absorption due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 4 days of exposure. 4. The compressive strength pararelled to grain due to oven heating increased till 4 days of exposure but decreased from 6 days, and that due to heating in water decreased from 2 days of exposure. 5. The shearing strength pararelled to grain due to oven heating increased till 2 days of exposure, but decreased from 4 days of exposure, and that due to heating in water decreased from 4 days of exposure. 6. The bending strength due to oven heating increased till 4 days of exposure but decreased from 6 days, and that due to heating in water decreased from 6 days of exposure. The impact bending absorbed energy due to oven heating decreased from 4 days of exposure, and that due to hearing in water decreased from 2 days of exposure.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.1 no.2
• /
• pp.173-191
• /
• 1994

This descriptive-correlational study was conducted to exam if there were relation between noise level and reaction to noise of inpatient. The purpose of this study was to provide a basic data for comfort of patient hospitalized. The hypotheses of the study are : 1. The higher perceived noise level of inpatient, the higher reaction level to noise. 2. The higher perceived noise level of inpatient, physiological reaction level to noise. 3. The higher perceived noise level of inpatient, the higher emotional reaction level to noise. The participant were 153 patients hospitalized in one general hospital. The research instruments used for this study were noise scale and reaction of patient scale developed by the author. Data was collected over a period of 10 days from the 9th of July to the 18th of July, 1994. Statistical analysis of the data included percentage, t-test, ANOVA and Scheffe test. Examination of the hypotheses was done by use of pearson correlation coefficient. The results are summarized as follows ; 1. The mean score of noise level was 2.24. Among noise factors reported by the subjects, that which ranked highest was 'Conversation of Visitors'(2.82). Next were 'noise of handling receptacle'(2.73), 'the others noise from outside'(2.73) and 'Conversation of supporter'(2.71). 2. The mean score of reaction level to noise was 2.19, physiological reaction level 2.04 and emotional reaction level 2.37. Among Physiological reaction to noise reported by the subjects, that which ranked highest was 'tired'(2.39). Next were 'sweating'(2.22) and 'headache'(2.20). Among emotional reaction to noise reported by the subjects, that which ranked highest was 'to irritate nerve'(2.53). Next were 'disturbing rest'(2.51) and 'to disturb sleep'(2.46). 3. The relationship between perceived noise level of inpatient and reaction to noise was statically significant (r=0.599, p=.0001). The relationship between perceived noise level of inpatient and physiological reaction to noise was statically significant (r=0.554, p=.0001). The relationship between perceived noise level of inpatient and emotional reaction to noise was statically significant(r=0.535, p=.0001). Thus hypothese 1, 2, 3 were supported. 4. There were significant differences between noise level of inpatient, admission periods, mobility of physical condition and exposure level to noise. 5. There were significant differences between physiological reaction level to noise, admission periods, mobility of physical condition and operation Yes or No. 6. There were significant difference between emotional reaction level to noise, admission periods, mobility of physical condition and exposure level to noise.