• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.E1
• /
• pp.1-12
• /
• 2002

One technique for determining dry acid deposition fluxes involves measurement of time - averaged ambient concentrations of dry acid deposition species using filter packs (FP) coupled with estimates of mean deposition velocities for the exposure period. A critical problem associated with filter pack data comparisons between various field sampling networks is the use of diverse sampling flow rates and duration protocols. Field experiments were conducted to evaluate the effects of varying sampling flow rates, from 1.5 to 10 standard liters per minute, on total nitrate and sulfate measurements of specific dry acid deposition species . Collocated FP samplers were used to determine sampling and analysis data reproducibility and representativeness . Ambient air samples were simultaneously collected using groups of filter packs operated at various flow rates over identical 7 day periods. The species measured were sulfur dioxide, particulate sulfate , nitric acid and particulate nitrate. Statistical results (ANOVA; alpha level 5%) showed that neither the low nor high sampling flow rates caused a significant difference in the measurements of total sulfate and adjusted total nitrate (ATN) . However, it was concluded that for high flow rate sampling measurements, total nitrate (TN) could be affected during extended sampling durations because of potential nitric acid overloading and breakthrough. Although the previous workers (Costello, 1990; Quillian, 1990) used much higher sampling flow rates (~ 17 sLpm) than employed here, it was assumed that for a high loading (> 50$\mu\textrm{g}$ HNO$_3$) of nitric acid on the Nylon filters, a significant fraction (~10%) of nitric acid could pass through the Nylon filters and be collected on the carbonate impregnated filters. It was concluded that even at the highest sampling flow rate employed (10 sLpm) at the Cary Forest site, nitric acid breakthrough was less than 10% of the total HNO$_3$ collected. However, for a heavily polluted urban airshed or with longer sampling times , higher filter loadings could result in substantial nitric acid breakthrough and HNO$_3$concentrations would be underestimated.

• Journal of Embryo Transfer
• /
• v.12 no.2
• /
• pp.141-149
• /
• 1997

This study was carried out to investigate the effect of vitrification and slow freezing methods on the post-thaw developmental rate of rabbit zygotes. After exposing rabbit zygotes in EFS solution for 0.5, 1, 2, 3 and S min at room temperature, they were washed with 0.5 M sucrose solution, D-PBS and TCM-199 and then cultured in TCM-199 plus 10% FBS with bovine oviduct epithelial cells(BOEC) to examine whether the cryoprotectant induced injury during the various exposure periods. The embryo development rates to hatched blastocyst after exposing in EFS solution for 3 and 5 min(40.0 and 16.7%) were significantly lower than in 0.5, 1 and 2 min(63.0, 72.0 and 54.5%), respectively. The post-thaw development rates to hatched blastocyst were significantly(P<0.05) higher in in vivo morula with intact mucin coat(85.2%) and mucin seperated morula(77.8%) than those of in vitro morula(58.5%) and zygote(5.9%), hut no difference was shown between in vitro morulae and mucin separated morula. The cryoprotectant dilution procedures showed no effects on the post-thaw development rates to hatched blastocyst under the present culture conditions. The post-thaw development to hatched blastocyst in the rabbit zygotes was not significantly different between the slow freezing(12.8%) and vitrification(5.9%). These results indicated that the rabbit frozen zygotes could he successfully developed in vitro to hatched blastocysts, though their developmental rate was very low, compared with morula stage embryos, in either vitrification or slow freezing procedure under the present conditions.

• Environmental Analysis Health and Toxicology
• /
• v.25 no.1
• /
• pp.57-68
• /
• 2010

This study assessed the lifetime cancer and non-cancer risk of aldehydes and volatile organic compounds exposure of young children at child-care facilities and indoor playgrounds in Korea. The samples were collected at various children's facilities (40 day-care houses, 42 child-care centers, 44 kindergartens, and 42 indoor playgrounds) in summer (Jul~Sep, 2007), winter (Jan~Feb, 2008) and Spring (Mar~Apr, 2008) periods, and analyzed by GC-MS. We estimated the lifetime excess cancer risks (ECRs) of formaldehyde, acetaldehyde, benzene, chloroform, CCI4 and tetrachloroethylene, and the hazard quotients (HQs) of Non-carcinogens (toluene, xylene, benzaldehyde and formaldehyde). Formaldehyde evaluated both cancer and non-cancer risk. The average ECRs of formaldehyde for young children were $1\times10^{-4}{\sim}1\times10^{-5}$ level in all facilities. HQs of four non-carcinogens did not exceed 1.0 for all subjects in all facilities.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.4
• /
• pp.477-497
• /
• 1994

The purpose of this study was to investigate the effect of timing of implant insertion on osseointegration after tooth extraction. Fifteen mongrel dogs, weighing 15kg or more, were used. The lower right 1st, 2nd, 3rd, 4th premolars and 1st molar were extracted under general anesthesia. Implants were inserted at 2, 4, and 8 weeks after extraction of the teeth, being designated as 2-, 4-, and 8-week groups, respectively. Results obtained were as follows. 1. Macroscopically there was neither an infection at the implant site nor an exposure of the implant. 2. Histologically the surrounding bone of the implant was less mature in the 2-week group than in the 4- and 8-week groups. 3. The implant-bone contact ranged from 75 to 82%, with no significant differences among the groups. No increase in the implant-bone contact was found with increasing healing periods from 4 to 12 weeks after implant insertions. 4. The average depth (0.64mm) of the fibrous connective tissue ingrowth in the 2-week group was slightly deeper than those in the 4- (0.51mm) and 8-week (0.53mm) groups at 12 weeks after implant insertion. 5. the implant-bone interfacial bond strengths were 73.05 kgf in the 2-week group, 69.71 kgf in the 4-week group and 73.76 kgf in the 8-week group. No significant difference was noted in pullout force among the groups. The degree of confidence of interfacial bone strength was highest in the 8-week group, followed by the 4- and 2-week groups. These results indicate that at least 4 weeks of healing period will be required before implant is to be inserted following tooth extraction.

• Imaging Science in Dentistry
• /
• v.44 no.2
• /
• pp.149-154
• /
• 2014

Purpose: This study assessed the effectiveness of three antimicrobial mouthrinses in reducing microbial growth on photostimulable phosphor (PSP) plates. Materials and Methods: Prior to performing a full-mouth radiographic survey (FMX), subjects were asked to rinse with one of the three test rinses ($Listerine^{(R)}$, $Decapinol^{(R)}$, or chlorhexidine oral rinse 0.12%) or to refrain from rinsing. Four PSP plates were sampled from each FMX through collection into sterile containers upon exiting the scanner. Flame-sterilized forceps were used to transfer the PSP plates onto blood agar plates (5% sheep blood agar). The blood agar plates were incubated at $37^{\circ}C$ for up to 72 h. An environmental control blood agar plate was incubated with each batch. Additionally, for control, 25 gas-sterilized PSP plates were plated onto blood agar and analyzed. Results: The mean number of bacterial colonies per plate was the lowest in the chlorhexidine group, followed by the Decapinol, Listerine, and the no rinse negative control groups. Only the chlorhexidine and Listerine groups were significantly different (p=0.005). No growth was observed for the 25 gas-sterilized control plates or the environmental control blood agar plates. Conclusion: The mean number of bacterial colonies was the lowest in the chlorhexidine group, followed by the Decapinol, Listerine, and the no rinse groups. Nonetheless, a statistically significant difference was found only in the case of Listerine. Additional research is needed to test whether a higher concentration (0.2%) or longer exposure period (two consecutive 30 s rinse periods) would be helpful in reducing PSP plate contamination further with chlorhexidine.

• BMB Reports
• /
• v.38 no.5
• /
• pp.602-608
• /
• 2005

As a crucial transcription factor family, heat-shock factors were mainly analyzed and characterized in tomato and Arabidopsis. In this study, we isolated two putative heat shock factors OsHSF6 and OsHSF12 that interact specifically with heat-shock element (HSE) from Oryza sativa L by yeast one-hybrid method. The full-length cDNA of OsHSF6 and OsHSF12 have 1074bp and 920bp open reading frame (ORF), respectively. Analysis of the deduced amino acid sequences revealed that OsHSF6 was a class A heat shock factor (HSF) with all the conserved sequence elements characteristic of heat stress transcription factor, while OsHSF12 was a class B HSF with C-terminal domain (CTD) lacking of AHA motif. Bioinformatic analysis showed that the sequences and structures of two HSFs' DNA binding domain (DBD) had a high similarity with LpHSF24. The results of RT-PCR indicated OsHSF6 gene was expressed immediately after rice plants exposure to heat stress, and the transcription of OsHSF6 gene accumulated primarily in immature seeds, roots and leaves. However, we did not find the transcription of OsHSF12 gene in different organs and growth periods. Our results implied that OsHSF6 might be function as a HSF regulating early expression of stress genes in response to heat shock, and OsHSF12 might be act as a synergistic factor to regulate the expression of down-stream genes.

• Journal of the Korean Society of Costume
• /
• v.37
• /
• pp.163-180
• /
• 1998

In western clothing, woman's body was port-rayed sexually as the distinction of sex was appeared, and the parts of body contain some kind of symbol of sex. Woman's body was diversly accentuated according to the divers ideal beauty concepts pursuits in the different periods. Today, in a Post-industrial Society whose social structure is very divers and complicated, the interpretation of woman's body reveals so various as the complex social structure. The purpose of this study is to comprehend the various interpretations of woman's body in the contemporary clothing. The concrete purposes of this study is as follows. First, this study is to define the concept of natural body and built body by differentiating the parts of body and searching for the sexual symbols accentuated in the western clothing. Second this study aims to review, the histori-cal process of prejudged distinction of sex in the western clothing, and to analyse the con-temporary sociocultural which forced to change this prejudged distinction of sex. Third, on the bases of this analses, this study also aims to present various interpretation on divers aspects of woman's body portrayed in the contemporary clothing. The interpretation of woman's body in the contemporary clothing were as follow. First, it is a body interpreted as a natural and neutral body which is based not so much on prejudged division of sex as on the expression of the body structure. And, it is a decomposed and recomposed body which is based on plastic principles. This body is portrayed by a layer-ing and wrapping which interrogated such traditional symbols of western clothing as collar, sleeve or trousers, skirt, etc. Second, it is a sexually symbolized body. This body is display-ed by exposure or sexual accentuation in the clothing. To conclude, a body interpreted in the contemporary clothing is no more a body accentuated by division of sex, but a body which per-mits indefinite hypotheses and interpretations under synthetic imagination.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.2 s.53
• /
• pp.187-198
• /
• 1996

The industrial use of MMMF(man-made mineral fibers), has been increasing, particularly since the banning of most asbestos products. Fibrous minerals can cause health abnormalities currently associated with occupational exposure to glass fiber. This study was conducted to evaluate health risks of glass fiber manufactory workers within the country. We examined questionaries, physical examination including auscultation, chest x-ray, pulmonary function test for 488 male workers, to go through their dermal itching symptoms and respiratory evaluation. we had the results as follows. 1. In 45% of the workers itching had been expressed at their entrance. At that time we was investigating, 18.5% had itching, and most of them complained it when they fall asleep and night. The Sequent itching site is waist and groin, upper and lower extremity in order, and it had been expressed mainly during summer and winter. 2. As the results of ventilatory functions test, 6.0% were obstructive type, 1.0% were restrictive type. So, glass fiber exposures should be controlled or elimination by protective devices in the workplace. 3. The means of FVC, $FEV_1,\;FEV_1%$ were in normal range. As the comparison of ventilatory functions by age groups, MMF was decreased significantly for the group, 50 years old and more than other groups. And the comparison by the serving periods at glass fiber producing factory, MMF was decreased for the workers had worked for $11\sim15$ years. Therefore, MMF be more sensitive index in the evaluation of ventilatory impairments caused by glass fiber workers.

• Korean journal of applied entomology
• /
• v.35 no.3
• /
• pp.205-208
• /
• 1996

Psylla pyricola population from Suwon($37^{\circ}$16' N) begins to enter diapause by exposure to a photoperiod of 14hr light. Over 93% of adults were induced to enter diapause when exposed to 13hr loght period, and at 18 and $25^{\circ}C$, the critical photoperiod was not influenced. When the photoperiod was switched during the nymphal stage from 16L to 10L, no morph change was occurred in the 4th and 5th instars. Average number of eggs laid per female was 486.2 in winter form adult and 387.2 in summer form adults, and average oviposition periods were 34 and 24 days, respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.2
• /
• pp.150-156
• /
• 2015

In this study, the effects of different mix proportions and fire scenarios (exposure temperatures and post-fire-curing periods) on fire-damaged concrete were analyzed using a nonlinear resonance vibration method based on nonlinear acoustics. The hysteretic nonlinearity parameter was obtained, which can sensitively reflect the damage level of fire-damaged concrete. In addition, a splitting tensile strength test was performed on each fire-damaged specimen to evaluate the residual property. Using the results, a prediction model for estimating the residual strength of fire-damaged concrete was proposed on the basis of the correlation between the hysteretic nonlinearity parameter and the ratio of splitting tensile strength.