• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.3
• /
• pp.69-78
• /
• 2021

Background: Approximately 30% of people suffer from chronic neck and shoulder pain. Chronic neck and shoulder pain arise due to the exposure to continuous low loading and monotonous work. This is a common musculoskeletal disorder in a society. As physical therapists, we should give appropriate treatment to these people. Methods: A total of 26 patients with chronic neck and shoulder myalgia were randomly allocated into two experimental groups. First, 13 patients received shoulder strength training, while the other 13 patients received cervical mobilization. Outcome measures included bilateral pressure pain threshold by using an algometer at upper trapezius, visual analogue scale (VAS) to express their pain scale, and muscle tension by using myoton pro device pre-intervention and after the final treatment. Results: The VAS and muscle tension in upper trapezius significantly decreased (p<.05) in both groups; however, no differences between two groups were observed (p>.05). The pressure pain threshold in upper trapezius significantly increased (p<.05) in both groups; yet, again, the differences between the groups did not reach statistical significance (p>.05). Conclusion: As methods of treatment, shoulder-specific strength training and cervical mobilization can be appropriate approaches to the treatment of neck and shoulder musculoskeletal disorder.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.4
• /
• pp.117-124
• /
• 2022

This study collected powder extinguishers with 6-10 years of elapsed life from January 2012 to January 2017 in market, factory, and apartment areas to experiment with changes in fineness and to examine the characteristics of extinguishing power. First, in the case of ABC powder, 98.3 wt% of the 8-year market area and 98.6 wt% of the 10-year apartment complex were found to be inappropriate in the first, second, and third arithmetic average analysis of the powder extinguisher from 6 to 10 years. That is, the fine distribution and size of the powder extinguishing agent particles should be managed within an appropriate range. It is analyzed that the powder fire extinguisher may experience a change in the fineness of the powder depending on the external environment exposure, placement, management status, and age of use, resulting in a decrease in digestive power or inability to radiate. Second, the fire extinguisher cannot be used in the initial fire suppression depending on the place of deployment, the environment of deployment, the progress of the number of years of use, and maintenance, so it is necessary to strengthen the device that enables fire extinguisher maintenance and inspection. Third, in the manufacturing process, the charging method should also be reviewed in consideration of the conditions of the workplace, the humid season, and the rainy environment.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.101-107
• /
• 2022

In Korea, the military has been conducting counseling forthe preemptive detection of psychologically unstable soldiers to prevent unexpected accidents and to help them adapt to military life. However, several soldiers feel anxious about face-to-face counseling with military officers and they have difficulty expressing themselves. Video See-Through HMD is a state-of-the-art mixed reality device that converts the user's real view into a digital view, which leads users to feel the actual situation as the virtual. To validate its usefulness as a new psychological counseling aid, we investigated 11 army soldiers who are under the counseling program in barracks. During the counseling conversation, participants were asked to wear or take off the Video See-Through HMD repeatedly. All conversations were recorded for behavioral observation. As a result, 80% of the soldiers showed a relatively stable state of mind when wearing the Video See-Through HMD, which leads them to be innocent and frank about their concerns. This method could improve the effectiveness of counseling to prevent unexpected accidents caused by unnoticeable psychological instabilities of the clients.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.175-184
• /
• 2022

This study analyzed the allocation of the skipper's attention during fishing operation in the wheelhouse of a Korean coastal composite fishing vessel by using video observation. To summarize the results, the ratio of lookout, radar and GPS monitoring, which is essential for prevention of collision at sea, was significantly lower than that of other fishing operation due to the attention concentration on the work place during hauling line. In order to reduce exposure to risk of collisions due to concentration of attention to certain tasks such as line hauling, it is necessary to develop an alert system that can notify the approach of other ships or obstruction throughout the ship using information from radar or the automatic identification system. In addition, the order of attention allocation to devices and facilities obtained in this study is expected to be used as basic data for device or facility layout based on the principle of usage frequency in designing wheelhouse for coastal composite fishing vessels in the future.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.150-156
• /
• 1994

To meet the process requirement of semiconductor device manufacturing, it is necessary to improve the alignment accuracy in exposure equipments. We developed the excimer laser stepper and will describe the methodology for alignment measurement and experimental results. Our wafer alignment system consists of off-axis optics, TTL(Through The Lens) optics and high precision stage. Off-axis alignment utilizes the image processing and /or diffraction from thealign marks of off-centered chip area. On the other hand, TTL alignment can be used for the die-by-die alignment using dual beam interferometry. When only off-axis alignment was used, the experimental alignment error(lml+3 .sigma. ) was 0.26-0.29 .mu. m, and will be reduced down to 0.15 .mu. m by adding TTL alignment.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.817-828
• /
• 2023

Deteriorating soil physical properties and increasing soil pathogens due to the continuous cultivation of field crops are the leading causes of productivity deterioration. Crop rotation, soil heat treatment, and chemical control are used as pest control methods; however, each has limitations in wide application to domestic agriculture. In particular, chemical control requires improvement due to direct exposure to sterilizing solution, odor, and high-intensity work. To improve the overall domestic agricultural environment, the problems of time and cost, such as field maintenance and cultivation scale, must be addressed; therefore, mechanization technology for chemical control must be secured to derive improvement effects in a short period. Most related studies are focused on the control effect of the DMDS (dimethyl disulfide) sterilizer, and research on the performance of the sterilization spray device has been conducted after its introduction in Korea, but research on the corrosion suitability of the material is lacking. This study conducted a corrosion test to secure the corrosion resistance of a soil sterilizer injection pump, and a mechanical failure mode by corrosion by the material was established. The corrosion test comprised operation and neglect tests in which the sterilizing solution was circulated in the pump and remained in the pump, respectively. As a result of the corrosion test, damage occurred due to the weakening of the mechanical strength of the graphite material, and corrosion resistance to aluminum, stainless steel, fluororubber, and PPS (polyphenylene sulfide) materials was confirmed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.666-668
• /
• 2013

Recently, the kind and number of malicious code, which operates in Operation System of smart devices, are rapidly increasing along with the fast supplement of smart devices. Especially, smart devices based on Android OS have high potential of danger to expose to malicious code as it has an easy access to system authority. When using intent, the global message system provided from Android, inter approach between applications is available, and possible to access to created data by the device. Intent provides convenience to application development in the aspect of reusability of component however, it could be appointed as a risk element in security-wise. Therefore, if intent is used in malicious purpose, it is easy to lead the condition where is weak on security. That is, it is possible to control as accessing to resources which application is carrying to operate by receiving intents as making smart device uncontrollable or consuming system resources. Especially, in case of system authority is achieved, the risks such as smart device control or personal information exposure become bigger when misusing broadcast intent through malicious code. This paper proposes a corresponding method of security vulnerability of Android intent that monitors the appearance of intent with intent pattern inspection, detects and blocks unidentified pattern intent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.7
• /
• pp.630-642
• /
• 2013

To transmit vital signal stream of mobile patients remotely, it requires mobility of patient and watcher, sensing function of patient's abnormal symptom and self-organizing service binding of related computing resources. In the existing relative researches, the vital signal stream is transmitted as a centralized approach which exposure the single point of failure itself and incur data traffic to central server although it is localized service. Self-organizing middleware platform based on heterogenous overlay network is a middleware platform which can transmit real-time data from sensor device(including vital signal measure devices) to Smartphone, TV, PC and external system through overlay network applied self-organizing mechanism. It can transmit and save vital signal stream from sensor device autonomically without arbitration of management server and several receiving devices can simultaneously receive and display through interaction of nodes in real-time.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.19-25
• /
• 2020

As the number of mobile device users increases, research on various user authentication methods has been actively conducted to protect sensitive personal information. Knowledge-based techniques have the disadvantage that security is deteriorated due to easy exposure of authentication means, and proprietary-based techniques have a problem of increasing construction cost and low user convenience to use the service. In order to solve this problem, a FIDO authentication system, which is a user authentication method using a smart device, has been proposed. Since the FIDO authentication system performs authentication based on the biometric information of the user, the risk of the authentication means being leaked is low, and since the authentication information is stored in the user's smart device, the user information due to server hacking is solved. Through this, it is possible to select and utilize user authentication technology suitable for the security level of the service. In this paper, we introduce the FIDO authentication system, explain the main parts required for FIDO UAF client-server development, and show examples of implementation using UAF open source provided by ebay.

• Journal of Applied Biological Chemistry
• /
• v.62 no.2
• /
• pp.181-186
• /
• 2019

The optimum design of LED device for irradiation of 460 nm blue light on extruded rice cake using simulation and the effect of the blue light on the inactivation of Bacillus cereus (B. cereus) group on the rice cake were investigated. The irradiated light intensity patterns on the surface area of the sample were simulated with three different LED arrays (centered, cross, and evenly spaced) and at various distances (22, 32, 42 mm) between the LED modules and the sample. In addition, the uniformity was calculated as Petri factor. The evenly spaced array resulted the most uniform light intensity pattern in the simulation, and the Petri factor of 32 and 42 mm of the distances showed higher than 0.9, which represents the ideal uniformity of LED device. The bacterial population of the rice cake decreased to less than the initial bacterial population during exposure to LED blue light, whereas the bacterial population of the control sample increased. The bacterial count of the rice cake after blue light irradiation for 24 h was 1.21 log CFU/g lower than the control sample. Petri factor increased with increase of the distance between the light source and sample, however, the reduction rate of B. cereus group decreased. Therefore, the design of LED device, that represented the Petri factor higher than 0.9 and inactivated the population of B. cereus group, with evenly spaced and 32 mm of distance between the light source and sample was suitable for extending shelf-life of rice cake.