• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.451-462
• /
• 2011

The purpose of this study was to investigate fungi and mycotoxin contamination of the rice straw bale silage in Korean. It was tested the 33 samples of rice straw round bale silage with various condition which fed cattle in the farm. The level of fungal contamination was $2.1{\times}10^6\;cfu\;g^{-1}$ in the average and $9.2{\times}10^8\;cfu\;g^{-1}$ in the maximum. The fungal contamination was detected in the all of normal samples which good condition of rice straw bale silage. When the fungi was isolate and identify, it was found 28 species and mycotoxin producing fungi were 8 species as following as Aspergillus flavus, Aspergillus fumigatus, Fusarium culmorum, Fusarium verticillioides, Penicillium carneum, Penicillium paneum, Penicillium roqueforti, Penicillium viridicatum. Specially, Penicillium paneum was found 42% of samples and Aspergillus sp. (A. flavus, A. fumigatus) are 21% of samples. In case of mycotoxin contamination, the 42% of samples are detected more than one kind of mycotoxin. Some samples are contaminated three kinds of mycotoxin. This study was not found aflatoxin ($B_1$, $B_2$, $G_1$, $G_2$) and fumonisin ($B_1$, $B_2$), but were detected the contamination of ochratoxin A (1.0~5.8 ug/kg), deoxynivalenol (DON, 156.0~776.7 ug/kg) and zearalenone (ZON, 38.0~750.0 ug/kg). Therefore, the above results show that rice straw round bale silage expose on hazard factors as mycotoxigenic fungi and mycotoxin contamination, and than need more research about mycotoxin in animal feed to protect animal and human healthy.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.699-720
• /
• 1995

This study was conducted to evaluate the effect of benzalkonium chloride solution as a wetting agent instead of water on dentin bonding with NTG-GMA/BPDM system (All-bond 2, Bisco.) and DSDM system (Aelitebond, Bisco.). Benzalkonium chloride solution is a chemical disinfectant widely used in medical and dental clinics for preoperative preparation of skin and mucosa due to its strong effect of cationic surface active detergent. Eighty freshly extracted bovine lower incisor were grinded labially to expose flat dentin surface, and then were acid-etched with 10 % phosphoric acid for 15 second, water-rinsed, and dried for 10 second with air syringe. The specimens were randomly divided into 8 groups of 10 teeth. The specimens of control group were remoistured with water and the specimens of experimental groups were remoistured with 0.1 %, 0.5 %, and 1.0 % benzalkonium chloride solution respectively. And then, the Aelitefil composite resin was bonded to the pretreated surface of the specimens by use of All-bond 2 dentin bonding system or Aelitebond dentin bonding system in equal number of the specimens. The bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, the mode of failure was observed, the fractured dentin surface were examined under scanning electron microscopy, and FT-IR spectroscopy was taken for the purpose of investigating the changes of the dentin surface pretreated with benzal konium chloride solution followed by each primer of the dentin bonding systems. The results were as follows : In the group of bonding with NTG-GMA/BPDM dentin bonding agent(All-bond 2), higher tensile bond strength was only seen in the experimental group remoistured with 0.1 % benzal konium chloride solution than that in water-remoistured control group(p<0.05). In the group of bonding with DSDM dentin bonding agent (Aelitebond), no significant differences were seen between the control and each one of the experimental group(p<0.05). Higher tensile bond strength were seen in NTG-GMAIBPDM dentin bonding agent group than in DSDM dentin bonding agent group regardless of remoistur ization with benzal konium chloride solution. On the examination of failure mode, cohesive and mixed failure were predominantly seen in the group of bonding with NTG-GMAIBPDM dentin bonding agent, while adhesive failure was predominantly seen in the group of bonding with DSDM dentin bonding agent. On SEM examination of fractured surfaces, no differences of findings of primed dentin surface between the groups with and without remoisturization with benzal konium chloride solution. FT-IR spectroscopy taken from the control and the experimental group reve::.led that some higher absorbance derived from the primers binding to dentin surface was seen at the group pretreated with 0.1 % benzal konium chloride solution than at the control group of remoisturizing with water.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.685-698
• /
• 1995

This study was conducted to the effect of temporary cement on the adhesiveness of dentin bonding agent to dentin surface. One hundred freshly extracted bovine mandibular incisors were grinded to expose flat labial dentin surface. The dentin surfaces were temporarized with either eugenol-containing temporary cement(TemBond and Zinc Oxide Eugenol cement) or non-eugenol temporary cement(Nogenol and TempBond NE) for 7days, and then the temporarization was removed with surgical currette and the exposed dentin surfaces were water-rinsed. Bonding specimens were made by use of All-Bond 2 and Super-Bond C&B dentin bonding agent, and stored in $37^{\circ}C$ distilled water for 24hours. The tensile bond strenth and the cohesive failure rate were measured, and then the pretreated dentin surfaces which the temporary cement had been applied to and removed from and the fractured dentin surfaces after bonding test were examined under scanning electron microscope. The results were as follows : In case of bonding with All-Bond 2, tensile bond strength of each experimental group was lower than that of the control group(p<0.05), but there was no significant difference between the bond strengths of the control group and each experimental group in case of bonding with Super-Bond C&B(p>0.05). No significant difference between tensile bond strength of experimental group, whether temporary cement contains eugenol or not, was seen(p>0.05). In case of bonding with All-Bond 2, the control group showed cohesive-adhesive mixed failure mode and the experimental groups mainly showed adhesive failure mode, but in case of bonding with Super-Bond C&B, almost of the control and the experimental groups mainly showed cohesive failure mode. On SEM examination, all of the dentin specimens pretreated with either 10 % phosphoric acid or 10% citric acid after application of the temporary cements demonstrated remnants of temporary cement attached to dentin surface.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.46-55
• /
• 2000

During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 1993

The purpose of this study was to evaluate the effect of various acid treatments on dentin bonding. Freshly extracted human teeth were uprightly embedded in self curing acrylic resin, and their occlusal surfaces were grinded to expose flat dentin surfaces. The specimens were divided into 4 groups. Specimens of one group were not treated so as to be a control and those of the other three groups were threated with 10% polyacrylic acid, 10% phosphoric acid, and 10-3 solution(10% citric acid/3% ferric chloride) respectively. Primer, bonding resin and composite resin were applied over the treated dentin surfaces sequentially. All specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured and the treated dentin surfaces and fracured dentin surfaces were examined under a scanning electron microscope. The results were as follows: Bond strengths of acid-treated groups were higher than those of the untreated group. In the acid-treated groups, bond strength was found to be the highest in the 10-3 solution group followed by the 10% phosphoric acid group and the 10% polyacrylic acid group(P<0.01). On SEM examination of dentin surfaces, the untreated dentin surface showed a remaining smear layer and closed dentinal tubules. Dentin surfaces treated with 10 % polyacrylic acid showed a clean dentin surface without the smear layer, but showed remaining smear plugs in dentinal tubules. A dentin surface treated with 10% phosphoric acid or 10-3 solution showed open dentinal tubules without the smear layer or smear plugs. On SEM observation of the fractured dentin-resin interface, the untreated group showed that failure occurred in the smear layer. The group treated with 10% polyacrylic acid showed no resin tag remained in the dentinal tubules, but resin tags in the dentinal tubules were observed in the group treated with the 10% phosphoric acid or the 10-3 solution. On the failure mode examination, the higher the bond strength of the group, the higher the frequency of cohesive failure. The coefficient between bond strength and cohesive failure rate was 0.71.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.141-149
• /
• 2012

The aims of this study are to assess external radiation exposed doses of body and hands of nuclear medicine workers who handle radiation sources, and to measure radiation exposed doses of the hands induced by a whole body bone scan with high frequency and handling a radioactive sources like $^{99m}Tc$-HDP and $^{18}F$-FDG in the PET/CT examination. Skillful workers, who directly dispense and inject from radiation sources, were asked to wear a TLD on the chest and ring finger. Then, radiation exposed dose and duration exposed from daily radiation sources for each section were measured by using a pocket dosimeter for the accumulated external doses and the absorbed dose to the hands. In the survey of four medical institutions in Incheon Metropolitan City, only one of four institutions has a radiation dosimeter for local area like hands. Most of institutions uses radiation shielding devices for the purpose of protecting the body trunk, not local area. Even some institutions were revealed not to use such a shielding device. The exposed doses on the hands of nuclear medicine workers who directly handles radioactive sources were approximately twice as much as those on the body. The radiation exposure level for each section of the whole body bone scan with high frequency and that of the PET/CT examination showed that radiation doses were revealed in decreasing order of synthesis of radioactive medicine and installation to a dispensing container, dispensing, administering and transferring. Furthermore, there were statistically significant differences of radiation exposure doses of the hands before and after wearing a syringe shielder in administration of a radioactive sources. In this study, although it did not reach the permissible effective dose for nuclear medicine, the occupational workers were exposed by relatively higher dose level than the non-occupational workers. Therefore, the workers, who closely exposed to radioactive sources should be in compliance with safety management regulations, and take actions to maximally reduce locally exposed dose to hands monitoring with ring TLD.

• Journal of Korean Philosophical Society
• /
• v.129
• /
• pp.193-217
• /
• 2014

The aim of this thesis is to elucidate the meaning of play which constitutes the genuine happiness of human being in Plato's '$heort{\bar{e}}$' and Aristotle's '$schol{\bar{e}}$'. Until now '$heort{\bar{e}}$', a divine act which communicate with original divinity, was differentiated from paidia. And '$schol{\bar{e}}$' was understood as activities in spare time opposed to labour. Plato put '$heort{\bar{e}}$' at the center of their life as a means for gods' blessing. Aristotle understand '$schol{\bar{e}}$' as free activities and the completion of individual life. For Aristotle play is not only a freedom from labour but also a supreme activity. Play itself is an end and a completion. Play is the essence of human life so man can be happy with play. Play is the activity of joy. And play is the most intellectual and spontaneous activity. Now we can assert that '$heort{\bar{e}}$' is the original play which elucidate the existence of the human being in connection with world and is the holy mode of play which makes an affluent life of communities. And we can maintain that '$schol{\bar{e}}$' is a mode of play which freed from the burden of labour and elevate the life of human being to academic activities and contemplative life. By this interpretation we can expose that play is the center of life. We can see the two fold meaning of apollonian-dionysian play and the perfect harmony of communities in Plato's '$heort{\bar{e}}$'. We can see also the delight as splendidness of life in Aristotle's '$schol{\bar{e}}$'. The Plato's theory of play seems different from Aristotle's. But their theories are the same in the general, because they both put play at the center of life and they equally assert that we have to live with playing our life. The world in which play is in harmony with labour- this world is their utopia.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.875-882
• /
• 2021

To minimize occupational noise induced hearing loss, it is recommended that workers should not be exposed to noise levels exceeding 85 dBA for over 8 h. In the present study, noise exposure levels were measured for seven workers based on their tasks on a training ship. The A-weighted noise exposure level (L_ex,24h) was measured by taking into account the A-weighted equivalent continuous sound level (L_Aeq,i), duration (h) and noise contribution (L_ex,24h,i) from the workers' locations. Results are thus obtained for different job categories as follows: officer group L_ex,24h=56.1 dB, navigation crew L_ex,24h=58.9 dB, navigation cadet L_ex,24h=62.0 dB, ship's cook L_ex,24h=64.3 dB, engine cadet L_ex,24h=91.1 dB, engineer L_ex,24h=91.1 dB, and engine crew L_ex,24h=95.1 dB. It was determined that the engineers, engine crews, and engine cadets in charge of machinery must wear hearing protection devices. By wearing hearing protection devices when working in highly noisy engine rooms, it is estimated that the noise expose levels could be reduced by the following amounts: engineer L_ex,24h=23.1 dB, engine Crew L_ex,24h=24.4 dB, and engine cadet L_ex,24h=21.5 dB. Moreover, if the no. 2 lecture room and mess room bottom plates in the cadets accommodations were improved to the 64 mm A-60-class floating plates, then further reductions are possible as follows: navigation cadet L_ex,24h=4.3 dB and engine cadet L_ex,24h=1.8 dB.

• The Korean Journal of Archival Studies
• /
• no.28
• /
• pp.35-81
• /
• 2011

Manhwa is a mass media (to expose all faces of an era such as politics, society, cultures, etc with the methodology of irony, parody, etc). Since the Manhwa records is primary culture infrastructure, it can create the high value-added industry by connecting with fancy, character, game, movie, drama, theme park, advertising business. However, due to lack of active and systematic aquisition system, as precious Manhwa manuscript is being lost every year and the contents hard to preserve such as Manhwa content in the form of electronic records are increasing, the countermeasure of Manhwa contents management is needed desperately. In this study, based on these perceptions, the need of Manhwa records management is examined, and the characteristics and the components of Manhwa records were analyzed. And at the same time, the functions of record management process reflecting the characteristics of Manhwa records were extracted by analyzing various cases of overseas Cartoon Archives. And then, the framework of record-keeping regime was segmented into each of acquisition management service areas and the general Manhwa records archiving strategy, which manages the Manhwa contents records, was established and suggested. The acquired Manhwa content records will secure the context among records and warrant the preservation of records and provide diverse access points by reflecting multi classification and multi-level descriptive element. The Manhwa records completed the intellectual arrangement will be preserved after the conservation in an environment equipped with preservation facilities or preserved using digital format in case of electronic records or when there is potential risk of damaging the records. Since the purpose of the Manhwa records is to use them, the information may be provided to diverse classes of users through the exhibition, the distribution, and the development of archival information content. Since the term of "Manhwa records" is unfamiliar yet and almost no study has been conducted in the perspective of records management, it will be the limit of this study only presenting acquisition strategy, management and service strategy of Manhwa contents and suggesting simple examples. However, if Manhwa records management strategy are possibly introduced practically to Manhwa manuscript repositories through archival approach, it will allow systematic acquisition, preservation, arrangement of Manhwa records and will contribute greatly to form a foundation for future Korean culture contents management.

• (The)Study of the Eastern Classic
• /
• no.54
• /
• pp.387-416
• /
• 2014

This article explored the duplicity relation between the Daxue/Zhongyong of Confucianism and the Yonghobigyeol of Taoism, which was advocated by Bongwoo Gwon Tae-hoon, who was a Confucian scholar and the progenitor of Sundoism. The view of Bongwoo Gwon Tae-hoon was that the Confucian scriptures that contain the mind control method handed down from Confucius are Daxue, Zhongyong and Zhouyixicichuan (周易繫辭傳). His another view was that Zhuzi (朱子) intentionally did not expose the original object of Confucian mind control method in the interpretation of Sangangling (三綱領) of Daxuezhangju (大學章句) annotated by him, since he was invoked by the contemporary logic of Sung Period (宋代). Bongwoo Gwon Tae-hoon added a new annotation on Daxue Sangangling and tried to disclose the original object of Confucian mind control method through new interpretation by explaining the implied meaning of character '中' (zhong) of Zhongyong Yunzhijuezhong (允執厥中) by way of Iljungron (一中論). In addition to this new interpretation, Bongwoo Gwon Tae-hoon took the Yuanxiangfa (原象法), which Confucius compiled as the extract of Yijing (易經) from Zhouyixicichuan (周易繫辭傳), as the core of Confucian metaphysical philosophy study. He suggested Yuanxiangfa as a methodology to reach the ultimate target of study together with the Yonghobigyeol of Taoism and paid attention to the close relationship between the two. Bongwoo Gwon Tae-hoon verified the original object of Daxue by new interpretation on Daxue Sangangling, left an analytical thought on the consistency among Daxue, Zhongyong and Xicichuan (繫辭傳) and the study method of Igyohabil (異敎合一), where he integrated the principle of Taoism and Confucianism. Bongwoo Gwon Tae-hoon left a new topic to Korean world of thought, which is as important as the Seondanhosuron (禪丹互修論) of Cheonghaja Gwon Geuk-jung (靑霞子 權克中) in Joseon Period.