• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1295-1296
• /
• 2007

A lot of researches about dye-sensitized solar cell (DSC) are recently being conducted. Because DSC has several advantages to pass the limits of silicon solar cells such as a low manufacturing expense, a simple manufacturing process and its transparency. But most researches on DSC are still conducted about the unit cell and laboratory-centered. That is, present researches on DSC are not practical. Therefore, researches about large area cells and modules have to be prerequisites for DSC to have the practicality. Characteristics of large area DSC are so different from those of small area DSC in aspect of fill factor and efficiency. In this study, we made an experiment on finding suitable size of DSC that has the most effective power according to the variation of active area. In detail, the experiment was conducted about the optimum ratio of length to width and we introduced the ratio of active area to non-active area to find the active area which has the best output. Because small DSC doesn‘t have the best output in comparison with total area of cell although the smaller DSC has the better efficiency. As a result, we achieved the optimum ratio of length to width of 8:3 and active area of $8cm^2$ as the optimum size for upscaling DSC.

• Journal of Nutrition and Health
• /
• v.30 no.7
• /
• pp.854-869
• /
• 1997

This study was conducted to evaluation the quality of meals served in elementary school based on nutrient contents and food diversity . A questionnaire was mailed to school foodservice dietitians requesting one week menus for April and October . Menus served in 388 schools from each province and from major cities in Korea were analyzed. Mean nutrient contents per meal of persons served, and food expenses per meal. Mean percentages of energy from fat was 20.2% , and was significantly l different by foodservice system. When nutrient contents were converted to amount per 1, 000kcal, all were higher than that calculated from RDA except calcium, iron, and Vitamin A. Most of these were not significantly different according to area, foodservice system, the number of persons served, and food expense per meal. Compared to 1/3 of RDA for children , many meals provided lower amounts of energy, Vit A, VitB2, and Ca. More than half of the meals provided less iron than 1/3 RDA for 10-12 years girls. Using the highest values of RDA for the elementary school age group as evaluation, criteria nutrient adequacy ratios(NAR) were lowest for Ca(0.61), Vit A(0.57), and iron(0.77). The mean adequacy ratio(MAR) was 0.86. Mean numbers of food items and dishes per meal were 15.3 and 5.1 , respectively. 66.3% of the meals provided three food groups of grain, meat, and vegetable. Except for the number of different food items served per meal, the aspect of food diversity was similar to that of nutrient contents. There was significant positive correlation between mean number of different food items served per meal and nutrient content . In summary , schools in small cities and rural areas than those in large cities, schools adapting commissary or joint management than those or density. Also the more food groups served per meal, the higher the nutrient content per meal . In summary , schools in small cities and rural areas than those in large cities, schools adapting commissary or joint management than those adapting conventional foodservice system, schools serving smaller number of persons, and schools with higher food expenses provided higher energy contents and food diversity.

• Health Policy and Management
• /
• v.12 no.2
• /
• pp.43-75
• /
• 2002

This study focuses on the factors that make the financial structure of hospitals in Korea different, and on recommended courses of action that could be very helpful to hospitals in maintaining a sound financial structure. Data used in this study were collected from 132 hospitals with complete general data of present conditions as well as financial statements. They were chosen from the 174 hospitals that passed the standardization audit undertaken by the Korean Hospital Association from 1996 to 2000 for the purpose of accrediting training hospitals. The dependent variable in this study is financial structure. It consists of liabilities as against total assets (total liabilities to total assets, short-term liabilities to total assets, long-term liabilities to total assets, short-term borrowings to total assets, long-term borrowings to total assets). The independent variables are ownership type, hospital type, location, whether or not a representative is a director of the hospital, the possibility of changing a hospital director, bed size, period of establishment, asset structure, profitability, growth, tax shields, business risk, competition. The factors that appear to have the strongest impact on the liabilities to total assets of all the hospitals sampled are ownership type, hospital type, profitability, tax shields, and business risk. It was found that not-for-profit private hospitals and for-profit private hospitals have more liabilities than public hospitals, and tertiary medical institutions have less liabilities than the secondary general hospitals. Moreover, hospitals earning more at the expense of high business risk have a distinct tendency to lower liabilities. Concerning the current ratio, it was found that factors such as ownership type, hospital type, period of establishment, asset structure, and business risk are the more significant variables. The current ratio of public hospitals is higher than that of both not-for-profit private hospitals and for-profit private hospitals, and the current ratio of tertiary medical institutions is higher than that of general hospitals. As business risk is higher in hospitals compared to other businesses, the current ratio becomes higher; this is because it is assumed that for fear of bankruptcy, hospitals lessen liabilities to total assets. On the other hand, as hospitals become older, the fixed assets to total assets become lower. It is remarkable that in hospitals, the factors affecting liabilities to total assets have an opposite regression coefficient sign against factors affecting current ratio. It brings out the same results borne out by the old financial theories and researches, in which a lot of the liabilities of hospitals are considered as the cause of worsening liquidity. Therefore, it is very important for hospitals to maintain a sound financial structure in order to survive using the rational acquisition and maintenance of capital.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.277-282
• /
• 2019

This study analyzed the determinants of the financial Soundness of savings banks. In particular, empirical analysis was carried out on how the loan deposit ratio correlates with financial soundness after restructuring. As the restructuring of savings banks was finalized in 2014, asset management changed and it is time to analyze the financial characteristics of savings banks. In summary, the relationship between the savings bank lending rate and the NPL ratio is estimated to have a negative value at the 1% significance level. In other words, the higher the mortgage rate, the lower the substandard and below ratio. It can be said that it is not easy for a savings bank to build an aggressive loan portfolio. In other words, the more difficult it is to finance loans through savings deposits, the more likely the risk aversion tends to be. The higher the corporate loan ratio, average interest expense, and economic growth rate, the higher the risk index. The larger the asset size and the higher the loan growth rate, the lower the risk index. Increasing the mortgage rate may reduce risk-seeking behavior, but it does not mean that it is unconditionally positive for savings banks. Therefore, the loan deposit rate regulation should reduce the incentives for excessive asset expansion and manage preemptive soundness through lending portfolio management.

• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.75-81
• /
• 1998

With the rise of the economic level and the improvement of the standard of living the size of the interior work is becoming large and specialized, With the recent opening of the domestic interior decoration market the order of the large-scale interior decoration work is actively received and its efficient construction is vigorously made. Accordingly reliability is required in keeping with all the accuracy of computing interior construction expenses systematically is importantly emerging. The estimation sheet written in a kind of process mode and in an area made as the construction expense breakdown mode were statistically treated and analyzed as well as quantity computation breakdown data. In determing the major factors that expert an influence on the factors of changes in construction expenses as well as the compositional ratio of construction work that becomes basic material for developing the cost model of interior decoration work the following conclusion could be made: Improvement should be made to suit the present situation by synthesizing and arranging the data practically used in current interior construction expenses. Required construction expenses for the kind of work common to each construction field are showing a given proportion and the required construction expenses of rather small scale interior construction work tend to be irregular. It is necessary to compute optimal construction expenses by calculating the optimal period of work and working personnel in consideration of the influential factor in each work.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.136-142
• /
• 2012

Thermodynamic equations for the electric power and temperature in a turbo expander generator (TEG) using pressure energy in a natural gas line are derived. From the equations, it was shown that dominant factor is not the pressure difference but the pressure ratio. The high energy level in the inlet of TEG can be made from nearly no expense of electric energy input, which means TEG can be treated as one of newly available clean energy source. If a post heating method is chosen to heat up expanded natural gas, the usage of cold energy is possible without a refrigeration cycle. The combined TEG and refrigeration system enhances economic benefit much more.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.8
• /
• pp.945-956
• /
• 1999

This work reports a set of approximate analytical solutions describing the initial transient process of close-contact melting between a rectangular parallelepiped solid and a flat plate on which either constant temperature or constant heat flux is imposed. Not only relative motion of the solid block tangential to the heating plate, but also the density difference between the solid and liquid phase is incorporated in the model. The thin film approximation reduces the force balance between the solid weight and liquid pressure, and the energy balance at the melting front into a simultaneous ordinary differential equation system. The normalized model equations admit compactly expressed analytical solutions which include the already approved two-dimensional solutions as a subset. In particular, the normalized liquid film thickness is independent of all pertinent parameters, thereby facilitating to define the transition period of close-contact melting. A unique behavior of the solid descending velocity due to the density difference is also resolved by the present solution. A new geometric function which alone represents the three-dimensional effect is introduced, and its properties are clarified. One of the representative results is that heat transfer is at least enhanced at the expense of the increase in friction as the cross-sectional shape deviates from the square under the same contact area.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.4
• /
• pp.91-98
• /
• 2011

The housing environment of the weak class in rural area is inferior, the elderly ratio is high, and senior citizens whose living by themselves are increasing. This study was to analyze the actual conditions of utilization status, characterization of residency, management method of the federation of construction associate's love house and local government's case, and usage of the village hall. For better study, we reviewed the literatures and conducted field surveys. The purpose of this study is to suggest a development plan of rural community living homes. The results of this study were as follows; First, it is important for proper site of rural community living home plans to select adjacent location in the surrounding medical and welfare facilities(including community facilities). Second, the living space for one person does not need such a space; about $33m^2$ is suitable. Third, it is important to use surplus area to make kitchen garden in the site planning. Also the architectural plans must be considered to minimize the maintenance costs for the sustainability of the house and winter heating expense problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.31-39
• /
• 2007

Wireless sensor network can increase independence and flexibility of network because it consists of mobile node without the aid of fixed infra, but, by unrestricted for the participation and breakaway of node, it has the difficulty in routing which is a basic function of network operation. To solve those problems, a suggestion is the location-based routing algorithm using geological or logical location information. The suggested algorithm which is based on cluster for location information of sensor is applicable to wireless sensor network of discrete situation, which guarantees extension and mobility. By efficiency analysis and reactive routing algorithm of current DSR and AODV, packet transmission ratio, routing overheads, and average communication expense is compared as node increases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.125-134
• /
• 1990

In order to utilize coal ash, which we go to great expense to scrap, as subba se course material, this study attempts to examine the deformation characteristics of coal ash with the addition of some cement when repeated loads are applied. The material of coal ash is obtained from Young dong and Youngwol thermal power plant. The results are : Unconfined compression strength shows rectilineal increase in propotion to the cement addition ratio. Within the scope of repeated loads of experimental condition, modulus of elasticity tends to decrease while compression strength shows about 21% increase.