• Korea Journal of Hospital Management
• /
• v.27 no.4
• /
• pp.13-21
• /
• 2022

Purpose: The purpose of this study was to analyze the association between single-person households & Beneficiary of National Basic Livelihood and recommendation on alcohol consumption, and counseling on drinking problems for adults 19 years of age or older. Methods: In this study, excluding missing values, the association between the single-person household & Beneficiary of National Basic Livelihood and recommendation to refrain drinking alcohol, counseling for drinking problems was analyzed by using the chi-squre test and logistic regression analysis. Results: In the case of non-single person households, compared to single-person households, the recommendation rate to refrain drinking alcohol was 1.519 OR (Odds Ratio [OR]: 1.159 , p-value <.0001). meanwhile, in the case of Beneficiary of National Basic Livelihood, the recommendation rate to refrain alcohol consumption was higher by 1.414 OR (OR: 1.414, p-value: 0.011), and the drinking problem counseling rate was also higher by 2.257 OR (OR: 2.257, p-value: 0.026) compared to non-beneficiary group. Discussion & Conclusion: Based on the 2016-2019 National Health and Nutrition Survey, this study investigated the associaiton between single households & Beneficiary of National Basic Livelihood and recommendations to refrain alcohol, and counseling on drinking problems. Compared to the Beneficiary of National Basic Livelihood group, single-person household group has recently been classified as a socially vulnerable group, but it is not applicable in the policy category. If policy and institutional measures for treatment are provided, it is expected that the problem of alcohol abuse can be reduced.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.8
• /
• pp.757-766
• /
• 2004

This paper focuses on the formulation and validation of an automatic strategy to select the optimal location and direction of strain gauges for the measurement of the modal response. These locations and directions are important to render the strain measurements as robust as possible when a random mispositioning of the gauges and gauge failures are expected. The approach relies on the evaluation of the signal-to-noise ratios of the gauge measurements from strain data of finite element. The multi-step optimization strategy including genetic algorithm is used to find the strain gauge locations-directions that maximize the smallest modal strain signal-to-noise ratio in the absence of gauge failure or its expected value when gauge failure is possible. A flat Plate is used to prove the applicability of the proposed methodology and to demonstrate the effects of the essential parameters of the problem such as the mispositioning level, the probability of gauge failure, and the number of gauges.

• Journal of Information Processing Systems
• /
• v.14 no.3
• /
• pp.590-599
• /
• 2018

Multivariate finite mixture model is becoming more and more popular in image processing. Performing image denoising from image patches to the whole image has been widely studied and applied. However, there remains a problem that the structure information is always ignored when transforming the patch into the vector form. In this paper, we study the operator which extracts patches from image and then transforms them to the vector form. Then, we find that some pixels which should be continuous in the image patches are discontinuous in the vector. Due to the poor anti-noise and the loss of structure information, we propose a new operator which may keep more information when extracting image patches. We compare the new operator with the old one by performing image denoising in Expected Patch Log Likelihood (EPLL) method, and we obtain better results in both visual effect and the value of PSNR.

• The KIPS Transactions:PartA
• /
• v.12A no.2 s.92
• /
• pp.103-108
• /
• 2005

The purpose of numerical analysis is to design an effective algorithm to realize some mathematical model on computer. In general the approximate value, which is obtained from computer operation, is not the same as the real value that is given by mathematical theory. Therefore the mr estimate measuring how approximate value is near to the real value, is the most significant task to evaluate the efficiency of algorithm. The limit of an error is used for mr estimation at the most case, but the exact mr evaluation could not be expected to get for there is no way to know the real value of the given problem. Wegmann's method has been researched, which is one of the solution to derive the numerical conformal mapping. We proposed an improved method for convergency by applying a low frequency filter to the Wegmann's method. In this paper we investigate error analysis based on some mathematical theory and propose an effective method which makes us able to estimate an error if the real value is not acquired. This kind of proposed method is also proved by numerical experiment.

• Journal of Korean Society of Transportation
• /
• v.22 no.1 s.72
• /
• pp.63-72
• /
• 2004

In conducting traffic safety programs, it is very important to identify hazardous sites in appropriate manner. The rate qualify control method is generally used in identifying hazardous sites since it can interpret the sites in the statistic aspects. The rate qualify control method is based on the assumption that the occurrences of traffic crashes follow the Poisson's distribution in which the expected value of traffic crashes equals the variance of those. However, there is greater variability than expected statistically, we call this phenomenon over dispersion. This study analyzed the problem related to the rate quality control method under the over dispersed data, and established a methodology to solve the problem. As a result of test on the basis of the field data, the new approach produced more reasonable results than those of the Poisson based rate quality control method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.122-123
• /
• 2018

The purpose of this study is to investigate the problem of installing VR theme park in Korea and to find a solution for it. VR is expected to play a leading role in the fourth industrial revolution as a new industry, but it is a reality that it is hard to feel its value in actual field. This is a reality that can not move one step further because it is trapped in the existing legal network rather than the essence of VR because it sees VR from the existing law frame. Because VR is regarded as an amusement device in the amusement facility and is regarded as a game, the former is applied to the Tourism Promotion Law and the latter is applied to the game industry law. When one content and hardware are applied to both laws at the same time and other regulations are applied to it, it is practically impossible to operate VR properly. In order to solve this problem, it is necessary to revise each law little by little in each law and amend the law that can apply VR itself. This study is expected to contribute to the revitalization of VR industry by presenting the ultimate problems and solutions in creating VR theme parks in Korea.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.451-457
• /
• 2016

To improve security in the data communication field, many studies on the application of chaotic signals to encryption have been conducted in recent years. In this study, a new security protocol where the initial value sensitivity and noise similarity of chaotic signals have been applied to an RFID communication channel was designed. In the case of chaotic systems, if the initial values become identical, the same signals are generated at the same time after that point even though the two systems have been calculated independently. Therefore, an unpredictable security channel can be produced based on such characteristics. However, a security channel can be produced only when an initial value is shared in advance, and thus there is a potential problem of infringement during the transmission of the initial value. To resolve this problem, a method in which a certain proportion of new chaotic signals are applied to two chaotic systems for communication and are then synchronized after some time was proposed. This new method can conceal the initial value, and thus can resolve the problem of the existing communication method using chaotic signals. The designed method was verified with the encryption and decryption of images. It is expected that a more secure RFID system could be established by applying the communication protocol proposed in this study to insecure RFID communication channels.

• International Journal of High-Rise Buildings
• /
• v.5 no.3
• /
• pp.177-186
• /
• 2016

Along the subduction-zone of the western Japanese islands, large earthquakes are expected occur around the middle of this century, and long-period ground motions will reach major urban areas, shaking high-rise buildings violently. Since some old high-rise buildings were designed without considering long-period ground motions, reinforcing such buildings is an important issue. An effective method to reinforce existing high-rise buildings is installing additional dampers. However, a problem with ordinary dampers is that they require reinforcement of surrounding columns and girders to support large reaction forces generated during earthquake ground motion. To solve this problem, a deformation-dependent oil damper was developed. The most attractive feature of this damper is to reduce the damping force at the moment when the frame deformation comes close to its maximum value. Due to this feature, the reinforcement of columns, girders, and foundations are no longer required. The authors applied seismic retrofitting with a deformation-dependent oil damper to an existing 54-story office building (Shinjuku Center Building) located in Shinjuku ward, Tokyo, in 2009 to suppress vibration under the long period earthquake ground motions. The seismic responses were observed in the 2011 Tohoku Earthquake, and it is clarified that the damping ratio was higher and the response lower by 20% as compared to the building without dampers.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.11 no.2
• /
• pp.1-6
• /
• 1974

The three-dimensional correction factor of the added mass of finite-length elliptic cylinders in vertical vibration in a free surface was calculated. This problem has already been dealt by T. Kumai[5] to contribute to analytical prediction of the three-dimensional correction factor for the added mass in vertical vibration of ships. In Kumai's work, the body boundary condition involved in the appropriate boundary value problem was approximately treated in the course of obtaining the solution. In this work, obtaining the solution derived from mathematically exact treatment of the body boundary condition, the author recalculated the three-dimensional correction factor for length-beam ratio $4{\sim}8$, beam-draught ratio $2.00{\sim}4.50$ and number of nodes from 2 to 7. And the numerical results were compared with both Kumai's results and the author's experimental data for two and three-noded vibrations of the cylinder of beam-draught ratio 2.40 The comparison of the numerical results shows that the author's are always higher than the Kumai's as expected. And the comparison of the numerical results with experimental data shows that the Kumai's numerical results have less deviation in case of two-noded vibration, and that, in case of three-noded vibration, the author's numerical results are in fairly good correspondence.

• Journal of Information Processing Systems
• /
• v.16 no.3
• /
• pp.530-540
• /
• 2020

In order to solve the problem of low tracking accuracy caused by complex noise in the fault diagnosis of complex nonlinear system, a fault diagnosis method of high precision cost reference particle filter (CRPF) is proposed. By optimizing the low confidence particles to replace the resampling process, this paper improved the problem of sample impoverishment caused by the sample updating based on risk and cost of CRPF algorithm. This paper attempts to improve the accuracy of state estimation from the essential level of obtaining samples. Then, we study the correlation between the current observation value and the prior state. By adjusting the density variance of state transitions adaptively, the adaptive ability of the algorithm to the complex noises can be enhanced, which is expected to improve the accuracy of fault state tracking. Through the simulation analysis of a fuel unit fault diagnosis, the results show that the accuracy of the algorithm has been improved obviously under the background of complex noise.