• Journal of Environmental Policy
• /
• v.10 no.4
• /
• pp.39-59
• /
• 2011

In this article, I would like to analyze the conditions in applying the LCC method for each construction type by selecting 10 apartment complexes among the Turn-key projects which have been ongoing for the last 5 years. In addition, this article will identify the problems to the application of double landscape architecture and suggest improvement measures. Among the 10 case targets, a total of 151 LCC analyses were conducted, and the average application ratio placing for each construction type was shown in the following order: architecture (34.4%)> electricity (21.2%)>machine (18.5%)>civil engineering (13.2%)>landscape architecture (12.6%). As numbers show, landscape architecture was the lowest. The ratio of LCC reduction amount was shown in the following order: machine (32.1%)> architecture (23.9%)>electricity (23.4%)>civil engineering (17.5%)>landscape architecture (3.1%). The field of landscape architecture had a reduction amount that was about 5 to 6 times lower than civil engineering which had a similar number of LCC analysis cases. The total LCC analysis items of landscape architecture was 19, including 15 double packing material, 1 building covering, 1 grass planting, 1 planting infrastructure, and 1 facility. The following measures were suggested to promote LCC analysis in landscape architecture: first, set an analysis item that considers the construction expense ratio of landscape architecture; second, legal regulation of landscape architecture and expansion of its application; third, prepare VE/LCC standards which are suitable for landscape architecture.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.79-85
• /
• 2016

A concrete silo plays an important role in subsurface low- and intermediate-level waste facilities (LILW) by limiting the release of radionuclides from the silo geosphere. However, due to several physical and chemical processes the performance of the concrete structure decreases over time and consequently the concrete loses its effectiveness as a barrier against groundwater inflow and the release of radionuclides. Although a number of processes are responsible for degradation of the silo concrete, it is determined that the main cause is corrosion of the reinforcing steel. Therefore, the time it takes for the silo concrete to fail is calculated based on two factors: the initiation time of corrosion, defined as the time it takes for chloride ions to penetrate through the concrete cover, and the propagation time of corrosion. This paper aims to estimate the time taken for concrete to fail in a LILW disposal facility. Based on the United States Department of Energy (DOE) approach, which indicates that concrete fails completely once 50% of the volume of the reinforcing steel corrodes, the corrosion propagation time is calculated to be 640 years, which is the time it takes for corrosion to penetrate 0.640 cm into the reinforcing steel. In addition to the corrosion propagation time, a diffusion equation is used to calculate the initiation time of corrosion, yielding a time of 1284 years, which post-dates the closure time of the LILW disposal facility if we also consider the 640 years of corrosion propagation. The electrochemical conditions of the passive rebar surface were modified using an acceleration method. This is a useful approach because it can reduce the test time significantly by accelerating the transport of chlorides. Using instrumental analysis, the physicochemical properties of corrosion products were determined, thereby confirming that corrosion occurred, although we did not observe significant cracks in, or expansion of, the concrete. These results are consistent with those of Smartet al., 2006 who reported that corrosion products are easily compressed, meaning that cracks cannot be discerned by eye. Therefore, it is worth noting that rebar corrosion does not strongly influence the hydraulic conductivity of the concrete.

• Health Policy and Management
• /
• v.25 no.4
• /
• pp.264-276
• /
• 2015

Background: Healthy cities of Korea have engaged in various activities regarding the Korea Healthy Cities Partnership, and research activities on healthy cities is one of the important area. In the present context, due to the current policy to pursue Sustainable Development Goals locally and globally, it is essential to emphasize the importance of healthy city. Therefore, it is important to identify the research trend related to healthy city. The aim of this study was to find out research trend of healthy city studies from 1990 to 2014 by reviewing published papers and studies systematically. Based on the finding of the study, the necessary implications on future research directions of the healthy city are obtained. Methods: The area of this study is domestic journal (Korea), international journal, thesis, and research report focusing on healthy city from 1990 to 2014. The selection of data was performed using keyword is based on domestic and international database. The analysis criteria were divided into year of publication, type of study, subjects, study methods, and study area. Results: One hundred twenty papers were selected for the analysis. Papers related to the healthy city issue were published 4.8 times in an average in a year during that the period. However, the number of papers published increased dramatically in the recent 4 years. Of total, 28 papers (44.4%) focused on the healthy city policy and urban environmental improvement, 18 papers (28.6%) focused on health promotion, and the remaining were program centered. Most papers (71 out of 120) used quantitative study methods. Of total studies, studies have conducted in Jinju city (9), Wonju city (8), Changwon city (6), and Gangnam-gu (5), respectively, as a study area of healthy city. Conclusion: First, domestic healthy city researches has been gradually increasing every year, over the past 10 years which has heightened interest in healthy cities. Second, the expansion of the various areas of research is required in order to contribute to future sustainable healthy city. Third, in recent years, by taking advantage of a variety of research methods, conducting the qualitative and mixed method research is considered to be a desirable change.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.300-309
• /
• 2017

A spacecraft obtains a reaction momentum required for an orbit correction and an attitude control by exhausting a combustion gas through a small thruster in space. If the exhaust plume collides with spacecraft surfaces, it is very important to predict the exhaust plume behavior of the thruster when designing a satellite, because a generated disturbance force/torque, a heat load and a surface contamination can yield a life shortening and a reduction of the spacecraft function. The purpose of the present study is to ensure the core technology required for the spacecraft design by analyzing numerically the exhaust gas behavior of the 10 N class bipropellant thruster for an attitude control of the spacecraft. To do this, calculation results of chemical equilibrium reaction between a MMH for fuel and a NTO for oxidizer, and continuum region of the nozzle inside are implemented as inlet conditions of the DSMC method for the exhaust plume analysis. From these results, it is possible to predict a nonequilibrium expansion such as a species separation and a backflow in the vicinity of the bipropellant thruster nozzle.

• Food Science of Animal Resources
• /
• v.40 no.4
• /
• pp.659-667
• /
• 2020

Muscle stem cells isolated from domestic animals, including cows and pigs, were recently spotlighted as candidates for the production of alternative protein resources, so-called cultured meat or lab-grown meat. In the present study, we aimed to optimize the in vitro culture conditions for the long-term expansion of pig muscle stem cells via the screening of various signaling molecules. Pig muscle stem cells were collected from the biceps femoris muscles of 3-d-old crossbred pigs (Landrace×Yorkshire×Duroc, LYD) and cultured in minimum essential medium-based growth media. However, the pig muscle stem cells gradually lost their proliferation ability and featured morphologies during the long-term culture over two weeks. To find suitable in vitro culture conditions for an extended period, skeletal muscle growth medium-2, including epidermal growth factor (EGF), dexamethasone, and a p38 inhibitor (SB203580), was used to support the stemness of the pig muscle stem cells. Interestingly, pig muscle stem cells were stably maintained in a long-term culture without loss of the expression of myogenic marker genes as determined by PCR analysis. Immunostaining analysis showed that the stem cells were capable of myogenic differentiation after multiple passaging. Therefore, we found that basal culture conditions containing EGF, dexamethasone, and a p38 inhibitor were suitable for maintaining pig muscle stem cells during expanded culture in vitro. This culture method may be applied for the production of cultured meat and further basic research on muscle development in the pig.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.127-135
• /
• 2008

Generally, optimum shortest path algorithms adopt single attribute objective among several attributes such as travel time, travel cost, travel fare and travel distance. On the other hand, multi-objective shortest path algorithms find the shortest paths in consideration with multi-objectives. Up to recently, the most of all researches about multi-objective shortest paths are proceeded only in single transportation mode networks. Although, there are some papers about multi-objective shortest paths with multi-modal transportation networks, they did not consider transfer problems in the optimal solution level. In particular, dynamic programming method was not dealt in multi-objective shortest path problems in multi-modal transportation networks. In this study, we propose a multi-objective shortest path algorithm including dynamic programming in order to find optimal solution in multi-modal transportation networks. That algorithm is based on two-objective node-based label correcting algorithm proposed by Skriver and Andersen in 2000 and transfer can be reflected without network expansion in this paper. In addition, we use non-dominated paths and tree sets as labels in order to improve effectiveness of searching non-dominated paths. We also classifies path finding attributes into transfer and link travel attribute in limited transit networks. Lastly, the calculation process of proposed algorithm is checked by computer programming in a small-scaled multi-modal transportation network.

• Land and Housing Review
• /
• v.8 no.1
• /
• pp.23-29
• /
• 2017

The BIM design is expected to expand to the domestic and overseas construction industries, depending on the effect of construction productivity and quality improvement. However, with the obligation of Public Procurement Service to design the BIM design, it includes a design error and the problem of utilization of 3D design by choosing a simple 2D to 3D remodelling method that can not be modelled in 3D modeling or use of the construction and maintenance phases. The results reviewed by BIM design results were largely underutilized and were not even performed with the verification of the error. In order to resolve this, one must develop the check system that secures the quality of BIM design and ensure that the reliability of BIM results are available. In this study, it is designed to develop a program that can automatically verify the design of the BIM design results such as violation of the rules of the BIM design, design flaws, and improve the usability of the BIM design. In particular, this programs were developed not only to identify programmes that were not commercially available, but also to validate drawings in low-light computer environments. The developed program(LH-BIM) store the information of attribute extracted from the Revit file(ArchiCAD, IFC file included) in the integrated DB. This provides the ability to freely lookup the features and properties of drawings delivered exclusively by the LH-BIM Program without using the Revit tools. By doing so, it was possible to resolve the difficulties of using traditional commercial programs and to ensure that they operate only with traditional PC performance. Further, the results of the various BIM software can be readily validated, which can be solved the conversion process error of IFC in the case of SMC. Additionally, the developed program has the ability to automatically check the error and design criteria of the drawings, as well as the ability to calculate the area estimation. These functions allow businesses to apply simple and easy tasks to operate tasks of BIM modelling. The developed system(LH-BIM) carried out a verification test by reviewing the review of the BIM Design model of the Korea Land & Housing Corporation. It is hoped that the verification system will not only be able to achieve the Quality of BIM design, but also contribute to the expansion of BIM and future construction BIM.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1310-1318
• /
• 2007

First of all, What was the modeling technique used to model 3D-Game character? It's a technique developed along several years, by experience... here is the bases Low polygons characters I always work in low polygon for two reasons -You can easily modify a low-poly character, change shapes, make morph for facial expressions etc -You can easily animate a low-poly character When the modeling is finished, Second, In these days, Computer hardware technologies have been bring about that expansion of various 3D digital motion pictured information and development. 3D digital techniques can be used to be diversity in Animation, Virtual-Reality, Movie, Advertisement, Game and so on. Besides, as computing power has been better and higher, the development of 3D Animations and Character are required gradually. In order to satisfy the requirement, Research about how to make 3D Game modeling that represents Character's emotions, sensibilities, is beginning to set its appearance. 3D characters in 3D Games are the core for the communications of emotion and the informations through their facial expression and characteristic motions, Sounds to Users. All concerning about 3D motion and facial expression are getting higher with extension of frequency in use. Therefore, in this study we suggest the effective method of modeling for 3D character and which are based on 2D Graphics.

• 대한공업교육학회지
• /
• v.40 no.1
• /
• pp.23-39
• /
• 2015

The purposes of this study were to evaluate the effectiveness of teacher training program for specialized school teacher in invention patent field and to explore the program improvement ideas. The study was carried out through on survey method and using program evaluating model developed for this study. The study subjects are 39 specialized high school teacher participated in training program about invention patent field at CNU-IECT(Invention education center for teacher). The data collection was done on August 2, 2014. The 37 questionnaies were analyzed. The educational needs of the training program were calculated by using the Borich(1980)'s needs assessment formula. The evaluating model was developed by the team. Major findings of this study were as follows; First, the training needs of specialized high-school teachers was high. Second, the satisfaction of the training program was high. Third, the overall effectiveness of training programs was high. Fourth, the improvement ideas were divided into four area - 1)The status quo area, 2) the alternatives exploration area, 3) the strategy modifications area, 4) the expected expansion area.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.401-412
• /
• 2016

The sustainable operation and development of ports is a key industry for Korea's national economy. It is increasingly more important to resolve conflicts with local communities due to port environmental problems such as air pollution, water pollution, noise and ecosystem destruction while securing port competitiveness through infrastructure expansion. In case of the Busan New Port development project in Korea, construction has been temporally suspended due to conflict with local fishermen over marine sand mining for construction. A primary reason for this is the absence and limitation of qualitative port environmental impact assessment methodologies in Korea. This includes the current investigation of fisheries damaged by ports. Therefore, the main purpose of this study is to propose economic valuation methods for assessing environmental impacts that are essential for efficient port environmental management and for sustainable port operation and development in Korea. To do this, this study examines the overall port environmental problems and their effects (damages) through the analysis of environmental policies and case studies of domestic and overseas ports. Then economic valuation methods are suggested for total economic values (TEV) of damaged environmental goods and services. Among the proposed methods, Habitat Equivalency Analysis (HEA), as a more scientific data based method, was applied to estimate marine ecosystem service damages from the designation of Busan New Port Anchorages. Finally, based on the study results, more efficient port environmental management will be achieved through the institutional adoption of the proposed economic impact assessment methods for port environmental damages.