• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.144-150
• /
• 2017

The inflow of infectious diseases is increasing due to the expansion of exchanges between countries and climate change. The public concern and anxiety about the increase of the possibility of infectious disease due to the social environment change are increasing greatly.These pandemics are a serious threat to the economy. Hence, multifaceted efforts are required to prevent them from spreading.In many hospitals, it is very important to promptly report infectious diseases, such as the CDC, when infectious diseases occur. In addition, it is difficult to separate general patients and suspected infected patients in these facilities, so there is a high risk of infection spreading within them. The paper presents the improvements of prevention and nonproliferation by researching the occurrence of infectious diseases, the method of separating infected patients, and the methods of preventing infectious diseases based on the audit results of MERS of the Board of Audit and Inspection.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.335-341
• /
• 2015

In this study, we analyzed a two-dimensional Stokes flow through a microchannel containing projections with constant spacing attached to each wall. The projections on the top and bottom walls were semi-circular in shape, with in-phase locations. By considering the periodicity and symmetry of the flow, the eigenfunction expansion and least squared error method were applied to determine the stream function and pressure distribution. For some typical radius and spacing values, the streamline patterns and pressure distributions in the flow field are shown, and the shear stress distributions on the boundary walls are plotted. In addition, the average pressure gradients in the microchannel are also calculated and shown with the radius and spacing of the projections. In particular, the results for the case of extremely small gaps between the projections on the top and bottom walls are in good agreement with the lubrication results.

• International Journal of Advanced Culture Technology
• /
• v.6 no.2
• /
• pp.107-116
• /
• 2018

In the past, design has been recognized as a means to determine colors, shapes, and functions Recently, however, it has been accepted in a wider sense, namely designing the entire service, including product and user experience design. In this way, in addition to creativity and expressive power that designers have as their main competence, according to the expansion of this design object, designers are required to have comprehensive abilities in related fields and accompanying technical professional abilities. If designing as a technology application as a direction toward this situation, design education can be carried out by approaching technology as a method of expression or design subject. It can also be an effective alternative towards improving the understanding of technology. Meanwhile, many small microcontroller board products with advanced functions and multi-functional specialized programming integrated development environments (IDEs) are becoming widespread due to their open source, low cost, and scalable features. However, students in the design department who lack the basic knowledge of science and engineering have difficulties learning, which requires considerable time and is required for practical use. From this point of view, we have made advancements in the technical understanding of design education by conducting fundamental research to the effectiveness of microcontroller-based prototyping tools as means of expression. We also conducted basic education of microcontroller boards for a certain period of time on students who majored in design in conjunction with the basic survey and investigated the obstacle factors using a questionnaire. Through these surveys, we have confirmed the necessity of designing microcontroller boards of low difficulty, which simplify the coding process that can act as a barrier in difficulty for design students to apply smoothly in design education. In addition, we intend to carry out a basic study on the guideline of microcontroller design for design education and composition of education programs.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.235-240
• /
• 2018

ICT converged smart factory started from German Industry 4.0 has been the driving force for the $4^{th}$ Industrial Revolution and the center of manufacturing innovation for major industrial countries. It will be developed according to industry characteristics of each country. Korea is relatively later than other competing countries in the smart factory area. So, the government is establishing related policy and tendering all sorts of supports for smart factory mainly to the small and medium-sized enterprises to spread over the manufacturing industry. It is necessary for government to categorize among similar manufacturing industry and make them share digitalized production information mutually. It will be more effective method for securing global competitiveness than the uniform support. Also, large companies need to establish cloud based production forecasting system over similar industry and share it with other companies rather than expansion of individual smart factory. Mutual development in the manufacturing industry will be realized when the small and medium-sized enterprises and large companies take part in the cooperating ground of smart factory.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2339-2358
• /
• 1993

Since the rate and completeness of combustion in direct injection engines were controlled by the characteristics of gas flow fields and sprays, an understanding of those was essential to the design of the direct injection engines. In this study the numerical simulations of injection pressure effects on the characteristics of gas flow fields and sprays were preformed using the spray model that could predict the interactions between gas fields and spray droplets. The governing equations were discretized by the finite volume method and the modified k-.epsilon. model which included the compressibility effects due to the compression/expansion of piston was used. The results of the numerical calculation of the spray characteristics in the quiescent environment were compared with the experimental data. There were good agreements between the results of calculation and the experimental data, except in the early stages of the spray. In the motoring condition, the results showed that a substantial air entrainment into the spray volume was emerged and hence the squish motion was relatively unimportant during the fuel injection periods. It was found that as the injection pressure increased, the evaporation rate of droplets was decreased due to the narrow width of spray and the increased number of droplets impinged on the bottom of the piston bowl.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.3
• /
• pp.141-145
• /
• 2006

The line current problem(2-dimensional space : point source) is not easy to analyze the magnetic field using the standard finite element method(FEM), such as overhead trolley line or transmission line. To supplement such a defect this paper is proposed the coupling scheme of analytical solution and FEM. In analysis of the magnetic field using the standard FEM. If the current region is a relatively small compared to the whole region. Therefore the current region must be finely divided using a large number of elements. And the large number of elements increase the number of unknown variables and the use of computer memories. In this paper, an analytical solution is suggested to supplement this weak points. When source is line current and the part of interest is far from line current, the analytical solution can be coupling with FEM at the boundary. Analytical solution can be described by the multiplication of two functions. One is power function of radius, the other is a trigonometric function of angle in the cylindrical coordinate system. There are integral constants of two types which can be established by fourier series expansion. Also fourier series is represented as the factor to apply the continuity of the magnetic vector potential and magnetic field intensity with tangential component at the boundary. To verify the proposed algorithm, we chose simplified model existing magnetic material in FE region. The results are compared with standard FE solution. And it is good agreed by increasing harmonic order.

• Journal of Engineering Education Research
• /
• v.7 no.2
• /
• pp.40-50
• /
• 2004

To keep pace with rapidly changing social and technological trends, the Department of Mechanical and System Design Engineering at Hongik University is in the process of updating teaching materials and learning methodologies while evaluating/revising our existing curriculum. In order to be better apprised of the employment needs and student aspirations, we have conducted three separate but related surveys by targeting experienced professionals and managers, alumni working in industries as practising engineers, and our current students. The surveys have furnished us with valuable insights that, we hope, will lead to a new curriculum and learning methods more in tune with needs of our students as well as their future employers. Among other findings, the analysis of the survey responses points towards expansion of integrated laboratory and design experiences, cultivation of improved written and oral communication capabilities involving individual and team efforts, and development of interdisciplinary courses encompassing related fields of engineering as well as emerging fields such as nano and information technologies.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.4
• /
• pp.3-13
• /
• 1989

In recent towing tank experiments, it has been observed that a ship moving near the critical speed $\sqrt{gh}$(g=gravitational acceleration, h=water depth) radiates solitons upstream in an almost periodic manner. As a ,consequence, the ship experiences considerable changes in resistance, trim and sinkage, or better known as squat. Mei and Choi(1987) developed a nonlinear theory for a slender ship by using the method of matched asymptotic expansions. For a certain class of channel width and ship slenderness, they found that the waves generated can be described by an inhomogeneous Korteweg-de Vries(KdV) equation. The leading-order solution properly predicts solitons propagating upstream, but it fails to render three-dimensional waves in the wake. In this paper a new approach has been made by choosing a different class of channel width and ship slenderness. The wave equation in the farfield turns out to be a homogeneous Kadomtsev-Petviashvili(KP) equation, which predicts solitons upstream and three-dimensional waves in the wake. Numerical results for the wave resistance, sinkage and trim reflect the experimentally identified phenomena.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.81-94
• /
• 2007

In order to solve the traffic problem which comes to be serious at day, the impotance of Intelligent Transport Systems(ITS) that accomplish information gathering, information processing, information offering with up-to-date scientific techniques is coming to be high. But many local self-government group want to solve the traffic problems with introduction of ITS, however, it is a actual condition where the systematic effective analysis is insufficient. This study establishes the methodology of effective analysis as introduction of ITS, which refers to the inside and outside of the country instance. And then, this research accomplishes direct and indirect effective analysis with the case study. As a result of SUWON ITS introduction effect analysis, the travel speed of TRC mode is increased 31%, and the delay of TRC mode is diminished 43.9% than before introducing case. Most of the citizen felt the improvement effect of ITS system operation, and the majority wanted the expansion of the ITS system in survey. The analysis of economic result that B/C ratio is 5.12. So, The the effect and economic propriety of the ITS enterprise appeared with the fact that it is sufficient.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.19 no.1
• /
• pp.43-54
• /
• 2006

Objective : In order to investigate anti-inflammatory effect of Alum objectively which is traditional remedy applicated by external preparation frequently, especially in Rhinologic field. Materials and Method : We studied the histopathologic and hematologic features, serum transaminase activities in the experimentally induced maxillary sinusitis in rabbits. 9 rabbits was divided into normal, control anti sample group(each 3 rabbits). We inoculated $10^{10}$ P. aeruginosa for experimental maxillary sinusitis to control group and sample group. Sample group was treated with aim solution(l0g/100cc) lcc via both nasal cavity (each 0.5cc) after 24hrs everyday for 14days. Results and Conclusion : 1. We confirmed that maxillary sinusitis was well induced by P. aeruginosa without occlusion of maxillary ostium. 2. There was no abnormal findings in serum transaminase(AST/ALT) activities even though application of Alum solution on nasal mucosa for 14days continuously. 3. Alum has evident anti-inflammatory effect of recovering mucosal surface injury, reduction of goblet cell, lymphocyte infiltration, edema and expansion of glandular tissue, dilatation and congestion of blood vessels and so on. 4. Alum has the effect that recover glandular tissue injury and decrease goblet cell increase by the result of dermal PAS staining increase and epidermal AB staining decrease in the qualitative analysis of epidermal and dermal mucopolysaccharide